Barco Xlm Hd30 Owners Manual

							7. Installation
The selected macro will be associated with the previous selected button.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with↑or↓
then 
 to return
Menu 7-34
BUTTONS
B
uttonMacroname1 Input 1
2 Input 2
3 Input 3
4 Input 4
5 Input 1234
6 Hatch
___________________
Select with↑or↓
 to select
 to return
Menu 7-35
CHANGE BUTTON
M
acronameInput 2
Input 3
Lamp
Power
Lens
Select with↑or↓
 to select
 to return
Menu 7-36
When standby button is selected
When the standby symbol is selected, the standby button menu appears.
BUTTON STANDBY
[ ] LAMP ONLY (MACRO Lamp)
Toggle between lamp on
and lamp off.
All other parts remained
full powered
[x] LAMP + POWER (MACRO
Standby)
Toggle between lamp on
and lamp off.
If the lamp is off the
projector
goes into low power mode.
 to select
 to return
Menu 7-37
The standby button can act now as:
• lamp on/off button when thefirst option is checked.
• lamp + power on/off when the second option is checked.
7.9 Macros
What is possible ?
A macro can be created, renamed, copied and started. The created macrofile can then be associated with a button on the remote
control.
Overview
• Run a macro
•EditaMacro
• Rename a macrofile
• Copy a macrofile
• Delete a macrofile
• Create a macrofile
7.9.1 Run a macro
What can be done ?
A macro can be started with the Run function.
How to run ?
1. Push the cursor key↑or↓to highlightMacros. (menu 7-38)
2. PressENTERto select.
The Macro menu will be displayed. (menu 7-39)
3. Push the cursor key↑or↓to highlightRun.
4. PressENTERto select.
The Run macro menu will be displayed. (menu 7-40)
R59770014 XLM HD30 25/05/2009
97 
						

							7. Installation
5. Push the cursor key↑or↓to highlight the desired macrofile.
6. PressENTERto select.
The selected macrofile will be executed.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with↑or↓
then 
 to return
Menu 7-38
MACROS
RUN
EDIT
RENAME
COPY
DELETE
CREATE
Select with↑or↓
then 
 to return
Menu 7-39
RUN MACRO
M
acronameAttr.Input 1 r--
Input 2 r--
Input 3 r--
Input 4 r--
Input 1234 r--
Select with↑or↓
 to select
 to return
Menu 7-40
7.9.2 Edit a Macro
What can be done ?
Amacrofile with read-write attributes can be edited. New lines can be added or existing lines can be changed or deleted.
How to edit a macro?
1. Push the cursor key↑or↓to highlightMacros. (menu 7-41)
2. PressENTERto select.
The Macro menu will be displayed. (menu 7-42)
3. Push the cursor key↑or↓to highlightEdit.
4. PressENTERto select.
The Edit macro menu opens. (menu 7-43)
5. Push the cursor key↑or↓to highlight the desired macrofile.
Only macrofiles with read write attributes can be changed.
It is possible to select a macrofile with only read attributes. WhenENTERis pressed, the content of the macrofile will be
displayed. When trying to change thisfile, an error message will be displayed.
6. PressENTERto select the selected macrofile.
The macro content overview menu opens. (menu 7-44)
7. Push the cursor key↑or↓to highlight an existing macro function or a free line.
When a existing macro function is selected, this function will be overwritten by the new selected function.
8. PressENTERto change the content of the macro.
TheMacro functionmenu opens. (menu 7-45)
9. Push the cursor key↑or↓to highlight the desired macro function.
Note:Only 2 macro functions are available.
When in the Edit macro menu an existing macro step is, and in the macro function menu, the dash is selected the selected macro
function will be erased.
10.PressENTERto select.
The typicalMacro valuemenu opens (the macro value menu differs for layout and lens). (menu 7-46)
11. Push the cursor key↑or↓to highlight the desired macro value.
12.PressENTERto select.
98
R59770014 XLM HD30 25/05/2009 
						

							7. Installation
The selected macro value will be associated with the previous selected macro function. E.g. layout = Input 1.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with↑or↓
then 
 to return
Menu 7-41
MACROS
RUN
EDIT
RENAME
COPY
DELETE
CREATE
Select with↑or↓
then 
 to return
Menu 7-42
EDIT MACRO
M
acronameAttr.Input 1 rw-
Input 2 rw-
Input 3 rw-
Input 4 rw-
Input 1234 rw-
Select with↑or↓
 to select
 to return
Menu 7-43
EDIT MACRO Input 1
Macro entry (function = value)
Layout = (home/jobs/mark8/
layouts/input1
background test pattern = False
-
-
-
Select with↑or↓
 to change
 to return
Menu 7-44
MACRO FUNCTION
M
acrofunctionlayout
lens
-
Select with↑or↓
 to select
 to return
Menu 7-45
MACRO VALUE
M
acrovalueInput 1
Input 2
Input 3
Input 4
Input 1234
Select with↑or↓
 to select
 to return
Menu 7-46
7.9.3 Rename a macrofile
Onlyfiles with a read write attribute can be renamed.
How to rename a macrofile ?
1. Push the cursor key↑or↓to highlightMacros. (menu 7-47)
2. PressENTERto select.
The Macro menu will be displayed. (menu 7-48)
3. Push the cursor key↑or↓to highlightRename.
4. PressENTERto select.
TheRename macromenu opens. (menu 7-49)
5. Push the cursor key↑or↓to highlight the desired macro.
6. PressENTERto select.
The macro rename menu opens. (menu 7-50)
Thefirst character of thefile name in theTofile namewill be highlighted.
When trying to rename a read onlyfile, an error menu will be displayed. The same error menu will be displayed when trying to
rename to an existingfile name.
7. Select with←or→the desired character. Reprogram that character with↑,↓or the numeric keys.
8. Repeat step 7 for the other characters.
9. PressENTERto confirm the rename.
The macro will be renamed to the new name.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with↑or↓
then 
 to return
Menu 7-47
MACROS
RUN
EDIT
RENAME
COPY
DELETE
CREATE
Select with↑or↓
then 
 to return
Menu 7-48
RENAME MACRO
M
acronameAttr.Input 1 rw-
Input 2 rw-
Input 3 rw-
Input 4 rw-
Input 1234 rw-
Select with↑or↓
 to select
 to return
Menu 7-49
RENAME MACRO
From file name:
macro[1]
To file name:
macro[1]
Select with←or→
Reprogram with↑,↓or
numeric keys
 to confirm
 to return
Menu 7-50
R59770014 XLM HD30 25/05/200999 
						

							7. Installation
7.9.4 Copy a macrofile
How to copy ?
1. Push the cursor key↑or↓to highlightMacros. (menu 7-51)
2. PressENTERto select.
The Macro menu will be displayed. (menu 7-52)
3. Push the cursor key↑or↓to highlightCopy.
4. PressENTERto select.
The copy selection menu will be displayed. (menu 7-53)
5. Push the cursor key↑or↓to highlight the desiredfile.
6. PressENTERto select.
The copy menu will be displayed. (menu 7-54)
Thefirst character of thefile name inTofile namewill be highlighted.
7. Select with←or→the desired character. Reprogram that character with↑,↓or the numeric keys.
8. Repeat step 7 for the other characters.
9. PressENTERto confirm the copy action.
The macro settings will be copied into the newfile.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with↑or↓
then 
 to return
Menu 7-51
MACROS
RUN
EDIT
RENAME
COPY
DELETE
CREATE
Select with↑or↓
then 
 to return
Menu 7-52
COPY MACRO
M
acronameAttr.Input 1 r--
Input 2 r--
Input 3 r--
Input 4 r--
Input 1234 r--
Select with↑or↓
 to select
 to return
Menu 7-53
COPY MACRO
From file name:
macro[1]
To file name:
macro[1]
Select with←or→
Reprogram with↑,↓or
numeric keys
 to confirm
 to return
Menu 7-54
7.9.5 Delete a macrofile
Onlyfiles with a read write attribute can be deleted.
How to delete ?
1. Push the cursor key↑or↓to highlightMacros. (menu 7-55)
2. PressENTERto select.
The Macro menu will be displayed. (menu 7-56)
3. Push the cursor key↑or↓to highlightDelete.
4. PressENTERto select.
The Delete macro menu opens. (menu 7-57)
5. Push the cursor key↑or↓to highlight the desiredfile.
6. PressENTERto select.
The Delete confirmation menu opens. (menu 7-58)
7. PressENTERto confirm.
100
R59770014 XLM HD30 25/05/2009 
						

							7. Installation
The macrofile will be deleted.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with↑or↓
then 
 to return
Menu 7-55
MACROS
RUN
EDIT
RENAME
COPY
DELETE
CREATE
Select with↑or↓
then 
 to return
Menu 7-56
DELETE MACRO
M
acronameAttr.Input 1 r--
Input 2 r--
Input 3 r--
Input 4 r--
Input 1234 r--
macro[1] rw-
Select with↑or↓
 to select
 to return
Menu 7-57
DELETE FILE
Delete file
macro[1]
 to confirm
 to return
Menu 7-58
7.9.6 Create a macrofile
How to create ?
1. Push the cursor key↑or↓to highlightMacros. (menu 7-59)
2. PressENTERto select.
The Macro menu will be displayed. (menu 7-60)
3. Push the cursor key↑or↓to highlightCreate.
4. PressENTERto select.
TheCreate macromenu opens. (menu 7-61)
A default macro name followed by a digit will be created. This default name can be renamed via Rename a macro. Macro
functions can be added via Edit a macro.
This new created macro will contain the active layout.
5. PressENTERto confirm the creation.
The createdfile will have read-write attributes.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS
MACROS
OSD
Select with↑or↓
then 
 to return
Menu 7-59
MACROS
RUN
EDIT
RENAME
COPY
DELETE
CREATE
Select with↑or↓
then 
 to return
Menu 7-60
CREATE MACRO
Create a macro with following
filename:
macro[1]
A simple macro will be created
containing the active layout.
Afterwards, you can Run, Edit,
Rename,Copy or Delete this macro.
To assign a macro to a button,
go to the menu
Installation/Buttons
 to confirm
 to return
Menu 7-61
R59770014 XLM HD30 25/05/2009101 
						

							7. Installation
102R59770014 XLM HD30 25/05/2009 
						

							8. Service
8. SERVICE
Overview
• Start up of the service menu
• Identification
• Change Projector Address – Common Address
• Change Customer ID
• Communication
• Date and time setup
• Lamp
• Dimming-CLO
• Thomson worldcam mode
• Convergence
• Reset hardware
• Factory defaults
• Diagnosis
8.1 Start up of the service menu
How to start up
1. Push the cursor key↑or↓to highlightService. (menu 8-1)
2. PressENTERto select.
The service menu will be displayed. (menu 8-2)
MAIN
Select a path from
below :
ADJUSTMENT MODE
INSTALLATION
SERVICE
Select with↑or↓
then 
 to return
Menu 8-1
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with↑or↓
then 
 to return
Menu 8-2
8.2 Identification
What can be seen on the identification screen ?
The identification screen shows the general information of the projector.
The following items will be displayed:
• Type of the projector.
• Software version
•Configuration, installation of the projector:
- front/ceiling
- front/table
- rear/ceiling
- rear/table
• Baud rate : transfer speed for communication with a computer. The baud rate of the projector must be the same as the baud
rate of the connected computer. When there is a difference, consult ’Change Baudrate’ in this chapter.
• Text, message and bar scales can be on or off.
• Projector serial number : indicates the fabrication number of the projector. This number can be useful when calling for technical
assistance.
R59770014 XLM HD30 25/05/2009
103 
						

							8. Service
• Projector run time : total time the projector is running since itsfirst start up.
• Customer id : user defined string of maximum 16 characters to identify its projector.
Start up
1. Push the cursor key↑or↓to highlightIdentification. (menu 8-3)
2. PressENTERto select.
TheIdentificationscreen will be displayed. (menu 8-4)
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with↑or↓
then 
 to return
Menu 8-3
XLM HD30
PROJ. ADDRESS : 1
SOFT. VERSION : 1.0.3
CONFIG: front/
ceiling
BAUDRATE PC: 9600
IP : 192.168.100.003
TEXT : on
SERIAL NO.: 1012000
RUNTIME: 150h
CUSTOMER ID : NAME
Select with↑or↓
then 
 to return
Menu 8-4
8.3 Change Projector Address – Common Address
How to change projector address ?
1. Push the cursor key↑or↓to highlightChange projector address. (menu 8-5)
2. PressENTERto select.
The Change Projector Address menu will be displayed and the actual address will befilled out. (menu 8-6)
3. Push the cursor key↑or↓to highlightProjector address.
4. PressENTERto select.
The digit will be highlighted.
5. Reprogram with↑,↓,←,→until the desired value is reached.
Or,
enter the digits directly with the numeric keys.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with↑or↓
then 
 to return
Menu 8-5
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS 0
Select with↑or↓
Reprogram with←,→
 to confirm
 to return
Menu 8-6
How to change the common address ?
1. Push the cursor key↑or↓to highlightChange projector address. (menu 8-7)
2. PressENTERto select.
The Change Projector Address menu will be displayed and the actual address will befilled out. (menu 8-8)
3. Push the cursor key↑or↓to highlightCommon address.
4. PressENTERto select.
The digit will be highlighted.
5. Reprogram with↑,↓,←,→until the desired value is reached.
104
R59770014 XLM HD30 25/05/2009 
						

							8. Service
Or,
enter the digits directly with the numeric keys.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with↑or↓
then 
 to return
Menu 8-7
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS 0
Select with↑or↓
Reprogram with←,→
 to confirm
 to return
Menu 8-8
8.4 Change Customer ID
What can be done ?
A customer ID of 16 characters can be added to the identification screen. That ID can be changed in Change customer ID as part
of the Service menu.
How to change
1. Push the cursor key↑or↓to highlightChange customer ID. (menu 8-9)
2. PressENTERto select.
The Change customer ID menu will be displayed.
The current customer ID isfilled out. (menu 8-10)
3. Reprogram the ID with the cursor keys or enter numeric values with the numeric keys.
Use the↑or↓key to change the current selected character to the desired value.
Use the←or→key to jump to another character in the string.
4. PressENTERto confirm the changes.
PressEXITto return without making any changes.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with↑or↓
then 
 to return
Menu 8-9
CHANGE CUSTOM ID
CUSTOM ID : AAA
Reprogram with↑↓→←or
NUMERIC KEYS
 to confirm
 to return
Menu 8-10
8.5 Communication
Overview
• Baud rate Setting
• Serial Interface setting
• RS422 Termination
• Network Configuration
8.5.1 Baud rate Setting
How to setup
1. Push the cursor key↑or↓to highlightCommunication. (menu 8-11)
R59770014 XLM HD30 25/05/2009
105 
						

							8. Service
2. PressENTERto select.
The communication menu will be displayed. (menu 8-12)
3. Push the cursor key↑or↓to highlightBaudrate.
4. PressENTERto toggle between the available baudrates.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with↑or↓
then 
 to return
Menu 8-11
COMMUNICATION
BAUDRATE [115200]
INTERFACE STANDARD[RS232]
RS422 TERMINATION [OFF]
NETWORK
Select with↑or↓
then 
 to return
Menu 8-12
Available baud rates
115200/57600/38400/19200/9600/4800/1200
8.5.2 Serial Interface setting
Set up
1. Push the cursor key↑or↓to highlightCommunication. (menu 8-13)
2. PressENTERto select.
The communication menu will be displayed. (menu 8-14)
3. Push the cursor key↑or↓to highlightRS232/RS422.
4. PressENTERto toggle between RS232 and RS422.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with↑or↓
then 
 to return
Menu 8-13
COMMUNICATION
BAUDRATE [115200]
INTERFACE STANDARD[RS232]
RS422 TERMINATION [OFF]
NETWORK
Select with↑or↓
then 
 to return
Menu 8-14
8.5.3 RS422 Termination
Set up
The last projector in a line should be RS422 terminated (ON position). All others in the line should be in the OFF position. To change
the termination position:
1. Push the cursor key↑or↓to highlight RS422 Termination. (menu 8-15)
The actual setting will be displayed.
2. PressENTERto toggle betweenONandOFF.
106
R59770014 XLM HD30 25/05/2009