Barco Xlm Hd30 Owners Manual

A. Specifications
A. SPECIFICATIONS
A.1 XLM HD30
Overview
Ambient TemperatureMax 35°C (95°F)
Brightness uniformity>80%
Communication
• 1x RS-232C IN (D-9 connector)
• 1x RS-232C OUT (D-9 connector)
• 1x 2way prop. protocol to Rugged remote (5 pins XLR connector)
• 2x prop. protocol (RJ45 connector)
• xlr and mini-jack for wired remote control
• 2x base-T 10/100 (RJ45 connector)
Compatibility
• All current video sources (PAL, SECAM, NTSC) in Composite, S-VHS, Component
or RGB formats
• All currently...

A. Specifications
InputsModular inputs:
Standard:
1x DVI
1x SDI
1x (HD)SDI (+ loop through)
1x RGB Analogue (up to UXGA)
Optional:
1x composite video/S-Video
1x RGB/YUV (both + loop through)
Lamp6.3 kW Xenon
Lamp warranty: 750 hrs
Lens encodersOn zoom and focus (with TLD lenses)
Lens ShiftVertical: -10% to +110%
Horizontal: -50% to +50%
(samll differences exist per lens type)
Lenses
Fixed focal lenses:
XLD 1.0 - R9852950
Zoom lenses:
XLD 1.45 - 1.8 - R9852090
XLD 1.8 - 2.4 - R9852092
XLD 2.2 - 3.0 -...

A. Specifications
Shipping DimensionsWidth: 104 cm
Height: 104 cm
Depth: 176 cm
Floor Space: 1,8304 m²
Volume: 1,903616 m³
Gross Weight: 252 kg
Throw RatioLens Throw ratio
XLD 1.0 - 1.0
Zoom lenses:
XLD 1.45 - 1.8 -> 1.45 - 1.8
XLD 1.8 - 2.4 -> 1.8 - 2.4
XLD 2.2 - 3.0 -> 2.2 - 3.0
XLD 2.8 - 5.5 -> 2.8- 5.5
XLD 5.5 - 8.5 -> 5.5 - 8.5
Weight
180 kg (400 lbs)
R59770014 XLM HD30 25/05/2009119 

A. Specifications
120R59770014 XLM HD30 25/05/2009 

B. Standard Source Set up files
B. STANDARD SOURCE SET UP FILES
B.1 Table overview
Ta b l e o v e r v i e w
The following standard sourcefiles are pre-programmed in the projector.
Name
1Fvert
Hz
2
FHor
kHz
3
Fpix
MHz
4
Ptot5Pact6Ltot7Lact8
640x200-cga 59,924 15.700 14.318 912 640 262 200
640x350-ega 59,702 21,851 16,257 744 640 366 350
640x480@72 72,888 30,288 19,687 832 640 520 480
640x480@75 74,999 37,500 31,500 840 640 500 480
640x480@85 85,009 43,270 36,000 832 640 509 480
640x480-graph 59,941 31,469...

B. Standard Source Set up files
Name1Fvert
Hz
2
FHor
kHz
3
Fpix
MHz
4
Ptot5Pact6Ltot7Lact8
1280x1024@85 85,027 91,149 157,506 1728 1280 1072 1024
1280x1024@100 62,039 107,207 124,923 1728 1280 1072 1024
1400x1050@50 50,015 54,517 94,641 1736 1400 1090 1050
1400x1050@60v 59,979 65,317 121,751 1864 1400 1089 1050
1400x1050@75v 74,866 82,277 155,998 1896 1400 1099 1050
1400x1050@85v 84,958 93,879 179,497 1912 1400 1105 1050
1440x900@60 60,000 55,463 88,74 1600 1440 926 900
1600x1200@48V 96,006 62,500...

B. Standard Source Set up files
Name1Fvert
Hz
2
FHor
kHz
3
Fpix
MHz
4
Ptot5Pact6Ltot7Lact8
PC98_1 56,416 24,823 21,050 848 640 440 400
PC98_2 39,994 32,835 47,840 1457 1120 411 375
PC98_3 60,000 50,000 78,569 1571 1120 833 750
SG_50 50,000 62,500 130,313 2085 1600 1250 1200
SG_60_1 60,002 63,902 107,355 1680 1280 1065 1024
SG_60_2 60,000 48,780 64,390 1320 1024 813 768
SG_60_3 60,000 43,200 54,432 1260 960 720 680
SG_60_4 60,000 75,000 156,375 2085 1600 1250 1200
SUN
1152x900-6666,000 61,847 64,502 1528...

B. Standard Source Set up files
124R59770014 XLM HD30 25/05/2009 

C. Maintenance
C. MAINTENANCE
Overview
• Pressure check of cooling liquid circuit
• Cleaning the dustfilters
• Cleaning the lens
C.1 Pressure check of cooling liquid circuit
When should it be done ?
The pressure of the cooling circuit should be checked on regular times. At least when replacing the lamp.
How to check
1. Unplug the projector from the wall outlet.
2. On the input side of the projector, remove the side by turning the 3 quarter turn fastener studs a quarter turn counter clockwise.
(image C-1)...

C. Maintenance
Image C-2
Pressure control
C.2 Cleaning the dustfilters
These items should be cleaned monthly under normal environment conditions. Equipment in very dusty or
otherwise contaminated areas may require more frequent maintenance.
If the airfilters are not regularly cleaned, the airflow inside the projector could be disrupted and cause over-
heating. Overheating may lead to the projector shutting down during operation.
Location of the airfilters
Two dustfilters are situated in the side cover on the...