Barco Xlm Hd30 Owners Manual

C. Maintenance
Image C-3
Removing the side cover
Image C-4
Front side dustfilterImage C-5
First side dustfilter
Image C-6
Dustfilter removedImage C-7
Second dustfilter
How to clean the dustfilters
1. Vacuum out the major dust.
2. Blow away remaining dust with compressed air in an other room or outside.
Tip:This parts should be cleaned approximately every six months under normal environmental conditions. A projector in a
very dusty area requires more frequent maintenance, advisable monthly.
R59770014 XLM HD30...

C. Maintenance
C.3 Cleaning the lens
To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for cleaning. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
To r a y s e eTMcloth (delivered together with the lens kit). Order number : R379058.
Howtocleanthelens?
1. Always wipe lenses with a CLEAN TorayseeTMcloth.
2....

Glossary
GLOSSARY
2:2 pull-down
The process of transferring 24-frames/secfilm format into video by repeating each frame (used for PAL DVD’s) as two videofields.
(AD)
3:2 pull-down
Method used to map the 24 fps offilm onto the 30 fps (60fields) or 25 fps (50fields), so that onefilm frame occupies three video
fields, the next two, etc. It means the twofields of every other video frame come from differentfilm frames making operations
such as rotoscoping impossible, and requiring care in editing. Some sophisticated...

Glossary
RS232
An Electronic Industries Association (EIA) serial digital interface standard specifying the characteristics of the communication path
between two devices using either D-SUB 9 pins or D-SUB 25 pins connectors. This standard is used for relatively short-range
communications and does not specify balanced control lines. RS-232 is a serial control standard with a set number of conductors,
data rate, word length and type of connector to be used. The standard specifies component connection...

Index
INDEX
A
Address 42–43
Program 43
RCU 43
Rugged remote 43
setting 42
Adjustment 44
Lens 44
Remote Control 44
Adjustment mode 48–50, 80, 82–83, 85
File Service 50
Menu memory 48
Overview 49
Scenergix 80, 82–83, 85
Black level 85
Horz. overlap zone 82
Introduction 80
Size adjustment 83
Vert. overlap zone 83
Start up 49
B
Baud rate 105
Set up 105
Blanking 78
C
cleaning 128
lens 128
CLO 109
Color key 69–71
Activation 69–70
Algorithm 71
Color values 70
Disabling 69
Palette 71
Range 70
Color space 58...

Index
Delete lensfile 92
Lensfiles 90
Lensfiles run 90
Rename lensfile 91
Save lens settings 91
Lens absolute positioning 93
Lens adjustment 89
Lens selection 89
Macros 97–101
Copy 100
Create 101
Delete 100
Edit 98
Rename 99
Run 97
Quick access keys 96
Start up 87
Tilt 93
Installation guidelines 9, 11, 13
Configurations 11
General 9
Lens 13
Safety area 13
Installation Guidelines 9–10, 17, 20
Ambient Temperature 9
Condition Check 9
Environment 9
Laser Beams 10
Screen Type 10
Stacking projectors 20
Transporting...

Index
S
Scenergix 81–83, 85
Black level 85
Horz. overlap zone 82
Preparations 81
Size adjustment 83
Vert. overlap zone 83
ScenergiX 81
How to activate 81
Service 103–109, 111–115
Baud rate 105
Setting 105
Change projector address 104
CLO 109
Common address 104
Communication 105–107
Baud rate 105
Network configuration 107
RS232 106
RS422 106
RS422 termination 106
Serial interface 106
Convergence 112
Display pattern 112
Customer ID 105
Change 105
Date and time 108
Diagnosis 113–115
Errors 113
Fan speeds...

Index
134R59770014 XLM HD30 25/05/2009 

Revision Sheet
To :
Barco nv Events/Documentation
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.89.70, Fax: +32 56.36.88.24
E-mail: [email protected], Web: www.barco.com
From:
Date:
Please correct the following points in this documentation (R59770014/01):
page wrong
correct
R59770014 XLM HD30 25/05/2009