Barco Xlm Hd30 Owners Manual

5. Getting used to the menu structure
5. GETTING USED TO THE MENU STRUCTURE
5.1 How to start up the menus
Box menu structure
The XLM HD30 has a box like menu structure which allows easy access to different parameters for setting up the projector.
How to activate
1. PressMENUon the RCU.
The main menu will start up. (menu 5-1)
↑or↓keys
• these keys are used to scroll through the available items within a menu box.
• these keys are used to make adjustments.
ENTER
•PressENTERto activate a selection...

5. Getting used to the menu structure
Thefirst digit will be highlighted.
2. Press↑or↓to increase or decrease the value.
3. Press←or→to select the next digit to be changed.
4. PressENTERto confirm the changes.
5.3 Menu memory
Overview
Each menu with sub menus, remembers its last selected sub item even when leaving the menu structure and that as long as the
projector is running. When restarting the projector from stand-by, the menu memory is reset.
After re-opening the main menu and selecting an item, the...

6. Adjustment Mode
6. ADJUSTMENT MODE
Overview
• Adjustment mode overview
• Start up of the Adjustment mode
• File Service
• Picture Tuning
• Window Adjustment
• Layout Adjustment
• Scenergix
6.1 Adjustment mode overview
Overview
• File service
- Load
-Edit
- Rename
- Copy
- Delete
- Options
• Picture tuning
- Color space
- Color temperature
- Gamma
- Noise reduction
- Input balance
• Window adjustment
- Select source
-Size
-Position
- Z-order
- Color key
- Alpha blend
- No signal color
• Layout...

6. Adjustment Mode
The adjustment mode menu will be displayed. (menu 6-2)
MAIN
Select a path from
below :
ADJUSTMENT MODE
INSTALLATION
SERVICE
Select with↑or↓
then 
 to return
Menu 6-1
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
WINDOW ADJUSTMENT
LAYOUT ADJUSTMENT
SCENERGIX
Select with↑or↓
then 
 to return
Menu 6-2
6.3 File Service
Overview
• Possiblefile manipulations
•Startup
• Loadfile
•Editfile
• Rename
• Copy
• Delete
• File Options
6.3.1 Possiblefile manipulations
Connecting a new source.
Before using...

6. Adjustment Mode
TheFile Servicemenu will be displayed. (menu 6-4)
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
WINDOW ADJUSTMENT
LAYOUT ADJUSTMENT
SCENERGIX
Select with↑or↓
then 
 to return
Menu 6-3
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with↑or↓
then 
 to return
Menu 6-4
6.3.3 Loadfile
Start up Loadfile
To start up the loadfile, handle as follow :
1. Push the cursor key↑or↓to highlightLoad. (menu 6-5)
2. PressENTERto select.
TheLoadmenu displays the correspondingfiles depending on the...

6. Adjustment Mode
The image is not perfect ?
If the displayed image is not correct after selecting the bestfittingfile, go to the Edit menu, select the activefile and change the File
settings.
6.3.4 Editfile
6.3.4.1 Start up
How to start up the Edit menu ?
1. Push the cursor key↑or↓to highlightEdit. (menu 6-8)
2. PressENTERto select.
The Editfile adaptation menu will be displayed (automatic positioned on the actualfile). (menu 6-9)
3. Select thefilewhichmustbeedited(mostlytheactivefile).
4. PressENTER.
Thefile...

6. Adjustment Mode
6.3.4.3 Correct value
What is already available during start up?
During the installation of afile with LOAD, the horizontal period, the total number of vertical lines are automatically measured and
filled out in the menu table. These values will be available when starting up the EDIT procedure of an activefile.
CAUTION:Do not adjust these settings on an activefile, they are used to identify the input sourcefile.
How tofind the correct values for the item in the Editfile menu?
Horizontal Total...

6. Adjustment Mode
How to install the correct settings for the options in the Editfile menu.
EDIT FILE OPTIONS
Source number 1
Clamp delay 8
Clamp width 20
Film Mode Detection [on]
Banner Protect [on]
Select with↑or↓
←,→,  to adjust
 to return
Menu 6-11
Source number The source number of a non-activefile can be changed to any other source number. This makes it
possible to create afile for future source numbers.
Clamp delay The time between the leading edge of the clamp pulse and the locked edge of the sync...

6. Adjustment Mode
2:2 pull-down
The process of transferring 24-frames/secfilm format into video by repeating each frame (used for PAL DVD’s) as two
videofields. ( AD )
Artefacts
Undesirable elements or defects in a video picture. These may occur naturally in the video process and must be
eliminated in order to achieve a high-quality picture.Most common in analog are cross color and cross luminance.
Most common in digital are macroblocks, whichresemble pixelation of the video image.
6.3.5 Rename
Start Up...

6. Adjustment Mode
6.3.6 Copy
Start Up
To copy the name of a selectedfile :
1. Push the cursor key↑or↓to highlightCopy.
2. PressENTER.
The Copy selection menu will be displayed. (menu 6-16)
3. Push the cursor key↑or↓to select afile name.
4. PressENTERto select.
The Copyfile menu will be displayed with the selectedfile name alreadyfilled in, in the ’Fromfile name :’ area and in the ’Tofile
name :’ area. Thefirst character in the ’Tofile name :’ area is highlighted. (menu 6-17)
COPY FILE
FilenameResAttrvga-txt[1]...