Barco Projector Cineversum 120 Quickstart Manual
Have a look at the manual Barco Projector Cineversum 120 Quickstart Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 183 Barco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1. Safety Instructions Replacement Parts When replacement parts are required, be sure the service technician has used original BARCO replacement parts or authorized replacement parts which have the same characteristics as the BARCO original part. Unauthorized substitutions may result in de- graded performance and reliability, fire, electric shock or other hazards. Unauthorized substitutions may void warranty. Safety Check Upon completion of any service or repairs to these modules, ask the service technician to perform safety checks to determine that the modules are in proper operating condition. Lamp Explosion Hazard P-VIPRlamps are under high pressure. The lamp must be handled with great care. They may explode if dropped or mishandled. Never try to disassemble the lamp housing. Lamp disposal: For disposal of spent lamps, always consult federal, state, localand provincial hazardous waste disposal rules and regulations to ensure proper disposal. 1.1.4 Safety on Cleaning Cabinet Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. To keep the cabinet looking brand-new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with mild detergent solution. Never use strong solvents, such as thinner or benzine, or abrasive cleaners, since these will damage the cabinet. Optical Performances To ensure the highest optical performance and resolution, the projection lenses are specially treated with an anti-reflective coating, therefore : AVOID TOUCHING THE LENS FACE. To remove dust on the lens, use a soft dry cloth. Do not use a damp cloth, detergent solution, or thinner. Follow the lens cleaning procedure in the Owners Manual. 1.1.5 Safety on Shipping Original Shipping package Save the original shipping packing material; they will come in handy if you ever have to ship one of your installed modules. For maximum protection, repack your set as it was originally packed at the factory. 1.2 Display Related Safety Instructions 1.2.1 Cine VERSUM 50 Overview • Oninstallationsite • On product specifications 1.2.1.1 On installation site Transportation • Any transportation of the unopened unit in its packaging should be done by two or more persons. To avoid injury or damage, do not lift the package by its packing bands. • When transporting or storing the unit, always position it vertically – NEVER horizontally. Horizontal transportation or storage invalidates the product warranty. • In transportation or storage of products in original packing, NEVER stack more than three units high. This warning is also indicated on he upper face of the carton. • For transportation or storage, observe the warnings and instructions on the upper face of the carton. R5976468 CINE VERSUM SYSTEM 03112003 7
1. Safety Instructions Nearby equipment If air conditioning ducts or lamps, etc. are located near the installation site, the attendant dust, extreme temperatures, humidity, and condensation may become sources of trouble. Please take sufficient steps to avoid this. Safety locations Do not install the unit where it may be easily touched or leaned against.Avoid locations subject to high vibrations or severe impacts. Lightning conditions • Consider existing lightning and sunlight angles when creating the installation layout. Extremely bright lightning can reduce the visibility and the quality of the displayed image. • In extremely bright surroundings, adjusting screen intensity may not result in perceptibly brightener images. Keep in mind that extreme intensity settings can reduce system service life. Installation partially outdoors The unit is designed for indoor use, and is not suited for open-air use. Installation in locations that are even partially exposed to the elements may lead to malfunctions or breakdown caused by any of the following: • Water and dust • Changes in temperature and humidity • Salt-bearing wind 1.2.1.2 On product specifications Temperature and humidity conditions • The installation site should meet the following conditions: - Operating temperature: 0 to 40 °C (largely depending on installation conditions) - Operating humidity: 20 to 80% - Storage temperature: –20 to 60°C - Storage humidity: 20 to 90% - Operating atmospheric pressure: 800 to 1100kPa - Storage atmospheric pressure: 600 to 1500 kPa • We recommend against installing electronic products such as thisunit in locations subject to high humidity. If the unit is to be installed in a location subject to relatively high humidity, observe the following: - Failure to install the unit in unacceptable ways may result in non-warranty damages. - Make sure the unit is grounded. - Do not allow water or other liquid to enter the unit. Prevent condensation One of the main sources of problems during winter is ’condensation’. Rapid temperature fluctuations can deposit water vapor inside the unit or on the screen, degrading performance. If condensation occurs, turn the unit off and leave it off for an hour or so. It is also good practice to increase the room temperature gradually. Burn in of the picture Avoid static pictures on the plasma screen for more than 15 minutes in order to prevent burn in of the picture on the plasma screen. Effective remote control distance This display emits weak infrared radiation. If other products controlled with infrared remote controls are placed nearby, remote control function may be affected. In such case, move them further away from the display or contact BARCO authorized dealer or assistance. Depending on installation conditions, the range of the unit’sown remote control may be reduced by infrared radiation emitted by the screen. The screen’s infrared intensity will vary, depending on the image displayed. 1.2.2 Cine VERSUM 80 and Cine VERSUM 120 1.2.2.1 Heat and Fire Hazards Warning Risk of Fire Warning Risk of Fire: Do Not Place Flammable or Combustible Materials Near Projector ! BARCO large screen projection products are designed and manufactured to meet the most stringent safety regulations. This pro- jector radiates heat on its external surfaces and from ventilation ducts during normal operation, which is both normal and safe. 8 R5976468 CINE VERSUM SYSTEM 03112003
1. Safety Instructions Exposing flammable or combustible materialsinto close proximity of this projector could result in the spontaneous ignition of that material, resulting in a fire. For this reason, it is absolutely necessary to leave an “exclusion zone”around all external surfaces of the projector whereby no flammable or combustible materials are present. The exclusion zone must be not less than 40 cm (16”) for all projectors. The exclusion zone on the lens side must be at least 2m. Do not cover the projector or the lens with any material while the projector is in operation. Keep flammable and combustible materials away from the projector at all times. Mount the projector in a well ventilated area away from sources of ignition and out of direct sun light. Never expose the projector to rain or moisture. In the event of fire, use sand, CO 2, or dry powder fire extinguishers; never use water on an electrical fire. Always have service performed on this projector by authorized BARCO service personnel. Always insist on genuine BARCO replacement parts. Never use non-BARCO replacement parts as they may degrade the safety of this projector. Slots and Openings Slots and openings in the cabinet and the sides are provided for ventilation; to ensure reliable operation of the projector and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product too close to walls, or other similar surface. This product should never be placed near or over a radiator or heat register. This projector should not be placed in a built-in installation or enclosure unless proper ventilation is provided. Projection Room Projection rooms must be well ventilated or cooledin order to avoid build up of heat around the projector. 1.2.2.2 Safety on Installation Personal Injury or Property Damage WARNING: To minimize risks of personal injury or property damage,due electrical shock, fire, energy hazards, mechanical and heat hazards, Ultraviolet an Infrared energy hazards, and/or chemical hazards this equipment must be installed and/or serviced ONLY by SERVICE PERSONNEL. • If the mains switch is not readily accessible, make sure that the plug on the mains cord or the mains outlet is easily accessible, or that a general switch is provided in the installation in order to disconnect the mains from the unit. • Do not place this projector on an unstable cart, stand, table...etc. • To prevent risk of fire or electric shock, do not immerse or expose this appliance in water or other liquids. • To prevent the risk of electric shock, do not disassemble thisappliance, but always take it to an authorized, trained service person when service or repair work is required. • The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons. Projector Damage If the Air Filters are not regularly cleaned or replaced, the air flow inside the projector could be disrupted, causing overheating. Overheating may lead to the projector shutting down during operation. In order to ensure that correct airflow is maintained, and that the projector complies with Electromagnetic Compatibility requirements, it should always be operated with all of it’s covers in place. Ensure that nothing can be spilled on, or dropped inside the projector. If this does happen, switch off and unplug the mains supply immediately. Do not operate the projector again untilit has been checked by qualified service personnel. The projector must always be mounted in a manner which ensures free flow of air into its air inlets and unimpeded evacuation of the hot air exhausted from its cooling system. Heat sensitive materials should not be placed in the path of the exhausted air. 1.2.2.3 Protection from High Intensity Light Beam and Ultraviolet Radiation WARNING: Do not stare in the high intensity light beam Do not look directly in the light beam. Due to the high luminance, damage to eye can happen. Exposure to UV Radiation The lamp contained in this product is an intense source of lightand heat. One component of the light emitted from this lamp is ultra- violet light. Potential eye and skin hazards are present when the lamp is energized due to ultraviolet radiation. Avoid unnecessary exposure. Protect yourself and your employees by making them aware of the hazards and how to protect themselves. Protecting the skin can be accomplished by wearing tightly woven garments and gloves. Protecting the eyes from UV can be accomplished by wearing safety glasses that are designed to provide UV protection. In addition to the UV, the visible light from the lamp is intense and should also be considered when choosing protective eye wear. Some medications are known to make individuals extra sensitive to UV radiation. The American Conference of Governmental In- dustrial Hygienists (ACGIH) recommends occupational UV exposure for an-8hour day to be less than 0.1 microwatts per square centimeters of effective UV radiation. An evaluation of the workplace is advised to assure employees are not exposed to cumulative radiation levels exceeding these government guidelines. R5976468 CINE VERSUM SYSTEM 03112003 9
1. Safety Instructions 10R5976468 CINE VERSUM SYSTEM 03112003
2. Cine VERSUM System 2. CINE VERSUM SYSTEM Overview • Digital Video Distribution Concept • Digital Video Distribution Parts 2.1 Digital Video Distribution Concept Structure of the concept The Cine VERSUM is from a concept of view a true digital videodistribution system to which at present a 50 Plasma screen-Cine VERSUM 50 - ,a single chip DLPTMprojectorbasedontheHD2chip-CineVERSUM80-anda3chipDLPTMprojector - Cine VERSUM 120 - can be connected. Up to 32 Display Modules Cine VERSUM 50Cine Versum 80 Cine VERSUM Master 8 Digital and Analog Input modules Digital Link Cine Versum 120 Image 2-1 Structure of the Cine VERSUM Concept 2.2 Digital Video DistributionParts Overview • Cine VERSUM Master • Cine VERSUM 50 • Cine VERSUM 80 • Cine VERSUM 120 • Digital Link R5976468 CINE VERSUM SYSTEM 03112003 11
2. Cine VERSUM System 2.2.1 Cine VERSUM Master General information The heart of the system is a fully digital video signal switcher/signal processor called Cine VERSUM Master, which is entirely modular. It can be equipped with up to 8 digital and/or analog input modules. Currently developed modules include: 3 digital inputs:DVI SDI HD-SDI 2 Analog Inputs:RGB Video/S-Video/Component Another major benefit of the Master is that all input processing –scaling and switching- is done as close as possible to the sources, from then on the entire system is digital, which results in optimum image reproduction at all time. Image 2-2 Cine VERSUM Master 2.2.2 Cine VERSUM 50 General Information The Cine VERSUM 50 is a high-resolution 50” plasma display module.This 16:9 display provides superior brightness and incredible contrast, giving a clear, flicker-free display in light intensiveenvironments. The Cine VERSUM 50 ensures a clear color reproduction and all-surpassing color purity. This enables enjoying extremely sharp pictures, without reduction in the blacks. A stylish slim design is intentionally chosen to allow easy integration in almost everyhome environment. BARCO is convinced that the future-oriented Cine VERSUM 50 concept is what the high demanding and critical customer is looking for. The advantages are numerous, as you will see, giving an answer to all the Home Theater lover’s present needs; and those of the future. Image 2-3 Cine VERSUM 50 12R5976468 CINE VERSUM SYSTEM 03112003
2. Cine VERSUM System 2.2.3 Cine VERSUM 80 General Information Based on the ground-breaking DLP™ 16:9 technology, the Cine VERSUM 80 delivers ultra-high quality color images with contrast ratios of over 1100:1 and a light output of 800 ANSI Lumen. The six-segment color wheel enables a pure color reproduction, reducing or completely eliminating all possible visual artifacts. Thanks to its superior design, noise generation on the Cine VERSUM 80 is virtually non-existent, making it ideal for even the most critical home theater usage. Image 2-4 Cine VERSUM 80 2.2.4 Cine VERSUM 120 General Information The extremely powerful Cine VERSUM 120 + Master combination provides the ultimate in home cinema entertainment. TheCine VERSUM 120 accommodates screen sizes of 90 to 150 diagonal (200 cm to 330 cm wide) and ensures a high quality picture even in brighter environments. With a wide versatility of lenses, the Cine VERSUM 120 can project out-of-axis both horizontally and vertically, which make the projector ideal for installation in the architecturally most demanding environments. Combined with the Cine VERSUM Master and its Digital Link, the ultimate Cine VERSUM System accommodates both analog and digital sources, combining extreme picture quality with elegant installation capabilities and future - proof modularity. Image 2-5 Cine VERSUM 120 2.2.5 Digital Link General Information The digital output of the Master is a proprietary Digital Link based on Fibre channel technology that allows transporting uncom- pressed video pictures in HD resolution over a distance of up to150’ (40m) to the first display device. Several displays can also be interconnected by the digital link by simply daisy chaining them. Presently two cable types have been developed for easy installation: • The flexible Cine VERSUM SL cable for short distances up to 15 meter maximum. This kind of cable is available in different lengths: 1.5m, 5m and 15m. • The Cine VERSUM XL rigid cable for longer distances up to 40 meter. Based on this one of the biggest advantages of the whole VERSUM concept turns out to be to digitally distribute a wide range of video sources through the whole house by use of one single digital cable. This digital link transports uncompressed HD images together with all communication between the Cine VERSUM Master and the different display modules attached to it. As such each displaydeviceactsasaremote IR receiver for the Cine VERSUM Master. R5976468 CINE VERSUM SYSTEM 03112003 13
2. Cine VERSUM System Image 2-6 Digital link connectors Image 2-7 Digital link cable 14R5976468 CINE VERSUM SYSTEM 03112003
3. Unpacking 3. UNPACKING Overview • Unpacking Cine VERSUM Master • Unpacking Cine VERSUM 80 • Unpacking Cine VERSUM 120 • Unpacking Cine VERSUM 50 3.1 Unpacking Cine VERSUM Master How to unpack the Cine VERSUM Master The original packing material can be reused to solely ship the Cine Versum Master. When doing so, it is important to use the material in the same way as they were originally shipped. Failure to correctly use the material can damage the product. Packaging SpecificationsDescription Dimensions570 (W) x 540 ( H ) x 290 ( D ) Weight16 kgs Image 3-1 R5976468 CINE VERSUM SYSTEM 0311200315
3. Unpacking Image 3-2 Ref. NoDescriptionRef. NoDescription 1Carton cover top6Pad 2Carton box7Power cord 3Pad8Remote Control 4Pad92 Manganese AA Batteries, R6P 5Pad10Operating Instruction 3.2 Unpacking Cine VERSUM 80 How to unpack the Cine VERSUM 80 The original packing material can be re-used to solely ship the Cine VERSUM 80. When doing so, it is important to use the material in the same way as they were originally shipped. Failure to correctly use the material can damage the product. Packaging SpecificationsDescription Dimensions700 (W) x 640 ( H ) x 310 ( D ) Weight28 kgs Image 3-3 16R5976468 CINE VERSUM SYSTEM 03112003