ATT System 25 Installation And Maintenance Manual

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
2053:incorrect entryArea Code = NPA
incorrect area code office
where N=2-9, P=0-l ,and A=l -9.
codeOffice Code = NXX where N=2-9,
X=0-9
Invalid area code or office code for
Toll Calls Allowed.
2054:incorrect entryData entry must be 0-2.
data must be 0-2
2055:inappropriate requestFound office code but not in proper
office code found in wronglist.
list
2056:incorrect entry
Area Code does not exist in the NPA
area code...

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
2074:inappropriate requestCheck Home Area Code/Toll Call
office code exists-list 1
Allowed list to see if office code exists
in list 1. Added office code to pattern
already.
2075:inappropriate request
Check Home Area Code/Toll Call
office code exists-list 2Allowed list to see if office code exists
in list 2. Added office code to pattern
already.
2076:inappropriate requestCheck Home Area Code/Toll Call
office code...

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
2082:inappropriate request
See: MENU = 7 (TCA)
superset exists-list 1ACTION = 2
Trying to add a number to a TCA
list that already exists in another
list. In this case, the superset is
used in conjunction with wild card
characters.
2083:
inappropriate requestSee: Menu = 7 (TCA)
superset exists-list 2ACTION = 2
Trying to add a number to a TCA
list that already exists in another
list. In this case, the superset is
used...

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
2089entry out of rangeARS Facility Level = O-3.
facility restriction level
exceeded
2090:inappropriate requestSingle line stations are defaulted
station not allowed speedpersonal speed dialing. ATL
numberstations must be administered
personal speed dialing.
3000:inappropriate request
Trunk is not a pool member;
trunk must be pooltherefore, this item cannot be
memberentered.
3001:incorrect entryTrunk directory number...

APPENDIX F: Administration Error Messages
ERROR MESSAGE
I
AND DESCRIPTIONPOSSIBLE SOLUTION
3015:at installed maxCan install 16 trunk group
-pool groupsmaximum.
3016:
entry out of rangeOnly 1 digit can be entered for the
access code must be 1trunk pool dial access information.
digit
3017:
entry out of rangeThe maximum value that can be
access code can’t exceed
entered for trunk pool dial access of
11.
3018:
inappropriate requestThe hunting position of a trunk in
only display of hunt
pool cannot be updated...

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
POSSIBLE SOLUTION
4001:
entry out of rangeMaximum FPDCs = 300
FPDC max reached
4002:incorrect entry
Specified FPDC not found.
does not exist or used
improperly
4003:
action number out ofMust do action 1 before removing
sequenceFPDC.
do action 1 display before
FPDC removal
4005:
inappropriate request
CAP not installed even through flag
unlogged FPDC’s/non-
is set to send FPDCs not logged in
existent CAPthere.
4007:
incorrect action...

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
5013:incorrect entry
Day= HHMM where HH=00-23
incorrect hours data
5014:incorrect entryDay = HHMM where MM= 00-59
incorrect minutes data
6000:incorrect entryCheck search type in admin. manual
search type does notto see if it exists.
exist
6001:
incorrect action numberGo back and check action value
can’t exceed 1 digit
taken.
6003:
entry out of rangeSearch maximum reached.
search max reached
6004:
inappropriate...

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
6016:incorrect facility typeThe subtype number is the entered
subfacility type out of
type is too large for the facility
range
specified.
6017:incorrect entryTraffic register number given is out
number out of range
of range.
6018:incorrect action number
Item No. 3 is not applicable for the
incompatible with search
entered search type under item No.
1.
6020:incorrect action numberData entered for an item number is...

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
7005:incorrect entryEntered data not valid for restricting
incorrect data to restrict
PBX calls.
PBX calls
7006:incorrect entryNumber of seconds before a
data can’t exceed 120
camped on call returns to the
attendant console [1-1 20].
7007:inappropriate request
To install CAP: Go to MENU 1 (Port)
must install CAP firstACTION = 1, DATA = terminal type
(309, or 310)
ACTION = 2, DATA = PDC
7008:inappropriate request...

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
7023:incorrect entryData value cannot exceed 1.
data can’t exceed 1
7026:
incorrect PDCMust be station or data port.
must be station or data
port
7027:incorrect entryEntry cannot be 0 or exceed 5
can’t be 0 or exceed 5
digits.
digits
7030:incorrect entryLeading 0 was found while
leading zeros not allowedprocessing item 2 for paging zone
add.
7031:
out of spaceNot enough room for adding new
no more room to addpaging...