ATT System 25 Installation And Maintenance Manual

APPENDIX E: Administration Codes and Data
Table E-J.MET Set Button Defaults
†Cannot be changed.
E-22 

APPENDIX E: Administration Codes and Data
Table E-K.PORT/PDC Administration, Data Terminals (Menu=12)
ACTIONDESCRIPTlONDATA
0Physical port numberCSSPP
1Enter data type code[See Table E-K]
2Enter DDC[1 -9999; 600-704]
3Restrict dial access to CO trunk pool†[1=Y/0=N]
4Restrict dial access to all other trunk[1=Y/0=N]
pools†
12DDC of station to hunt to next[PDC; 0 for none]
13Restrict this stationfrom making[1=Y/0=N]
outward calls†
14Assign toll restriction class†[1-4; 0 for none]
15Assign ARS Facility...

APPENDIX E: Administration Codes and Data
Table E-K.PORT/PDC Administration,Data Terminals (Menu=1/2)
(Contd)
ACTIONDESCRIPTIONDATA
67Allow terminal to operate at a baud rate[1=Y/0=N]
of 9600 bps†
68Allow terminal to operate at a baud rate[1=Y/0=N]
of 19200 bps†
69Assign this parity setting to correspond[0-3; 2]
with terminal’s parity setting†
0= Bit in parity
position (no parity);
1 =Bit in parity
position (no parity)
2=Even parity;
3= Odd parity
70Allow keyboard dialing/Command Mode†[1=Y/0=N]
71Allow...

APPENDIX E: Administration Codes and Data
Table E-L.Data Port Type Codes
IF THE DATA PORT TYPE IS
CODE:I
(
DataLineCard (DLC)1801
functionality for ZTN126 or
TN726
STAR LAN Interface Circuit1802
Pack (STARLAN CP) in
DLC-compatibility mode
Disable this individual port (for0
any of the above data port
types)
E-25 

APPENDIX E: Administration Codes and Data
Table E-M.Port Administration, Trunks (Menu=1)
ACTION
DESCRIPTIONDATA
0Physical port numberCSSPP
1
Enter trunk port type code[See Table E-N]
2Enter trunk number[0001 -9999;
0001-0104]
3Assign class-of-service code[(DID–1-4; 3)
(All other—
See Table E-O; 8)]
4Assign pooled facility access code.[Facility access code;
(100,101,102)
O if trunk not in
any group]
5Allow dial access[l=Y/0=N]
6Assign the trunk to a DGC group[1-32; 0 or none]
7Make this a directed night...

APPENDIX E: Administration Codes and Data
Table E-M. PORT Administration, Trunks (Menu=1) (Contd)
ACTION
DESCRIPTlON
DATA
12For Switched Loop Attendant Systems
[0-2; 0=either Att./
ONLY; Which attendant should receive
1=1st At. ONLY/
calls from this trunk?†
2=2nd Att. ONLY]
13Specify Remote Access usage type‡
[0-2; 0=name,
1=shared, 2-dedicated]
14Allow dial-access users to queue for this
[1=Y/0=N]
trunk?
15Adjust Digital Tie Trunk gain for satellite
[1 = satellite,
> 15 msec round trip delay
0= tandem]...

APPENDIX E: Administration Codes and Data
Table E-N. Trunk Type Codes
If the Trunk Type is:
Code:
Ground Start, CO701†
Ground Start, WATS, FX702
Ground Start, WPBX/Centrex705
Loop Start, CO801†
Loop Start, WATS, FX802
PBX/Centrex805’
DID Immediate Dial901
DID Wink Start902†
Auto-in/Auto out1001
Auto-in/Immediate Dial-out1002
Immediate Dial-in/Auto-out1003
Immediate Dial-in/Immediate Dial-out1004
Wink Dial-in/Auto-out1005
Wink Dial-in/Wink Dial-out
1006†
Delay Dial-in/Auto-out1007
Delay Dial-in/Delay...

APPENDIX E: Administration Codes and Data
Table E-O.Trunk Class-of-Service (for all trunks except DID)
TRUNK CLASS-OF-SERVICE
(FOR ALL TRUNKS EXCEPT DID)
COSNIGHT
OUTWARDINSHORT
CODESERVICESIGNALINGONLYDISCONNECT
0TT
1TTl
2TTl
3TTll
4DP
5DPl
6DPl
7DPll
8lTT
9lTTl
10lTTl
11lTTll
12lDP
13lDPl
14lDPl
15lDPll
TT=Touch-Tone
DP=Dial-Pulse
E-29 

APPENDIX E: Administration Codes and Data
Table E-P.Port Administration, Auxiliary Equipment (Menu=1)
ACTlON
DESCRIPTlON
DATA
0Display physical port number, in the
form CSSPP
1Enter special feature port type code
(see Table E-Q).
1Assign external alerts
[253]
2Assign associated station number
[PDC of associated
station; 0 if night
service alert]
1Assign paging Interface (associated
[1301-1303]
with auxiliary trunk circuit)
2Assign PDC for this zone
[PDC (zone 1)
PDC (zone 2)
PDC (zone 3)
0 for none]...

APPENDIX E: Administration Codes and Data
Table E-P. Port Administration, Auxiliary Equipment (Menu-1 ) (Contd)
ACTION
DESCRIPTlONDATA
1Assign voice Messaging Service port[260 - 263]
type:
260 =standard voice mail services
261 =call coverage/auto-attendant
262 =message drop
263 =
bulletin board
2
Assign PD for this VMS port
[PD.]
3Restrict dial access to the CO trunk pool
[1=Y/0=N]
4Restrict dial access to all other trunk[1=Y/0=N]
pools
5Make this VMS port dial-accessible
[1=Y/0=N]
10Make this VMS port...