Home > ATT > Communications System > ATT System 25 Installation And Maintenance Manual

ATT System 25 Installation And Maintenance Manual

Here you can view all the pages of manual ATT System 25 Installation And Maintenance Manual. The ATT manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 401

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
POSSIBLE SOLUTION
7037:inappropriate request
Direct Group Calling Delay
announcement groupAnnouncement (1 per system).
already exists
(Need a ZTN78 or TN742 CP port)
Go to MENU = 8 Search
ACTION = 1 DATA = 16
ACTION = 2 DATA = 255
ACTION = 3 DATA = 0
(hit c to continue)
Directed Night Service Delay
Announcement (2 per system)
(Need a ZTN78 or TN742 CP port)
Go to MENU = 8 Search
ACTION = 1 DATA = 16
ACTION = 2 DATA = 251 or 252...

Page 402

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
7047:incorrect PDCCan verify that the PDC is not in a
not in any DGC groupDGC group by:
Go to MENU = 8 Search
ACTION = 1 DATA = 6
ACTION = 2 DATA = PDC
(hit c to continue)
7048:incorrect PDC
Do a Search to find the DGC group
not in this DGC groupthe PDC is a member of.
Go to MENU = 8 Search
ACTION = 1 DATA = 6
ACTION = 2 DATA = PDC
(hit c to continue)
7049:
incorrect PDCIncorrect virtual facility access code.
must...

Page 403

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
POSSIBLE SOLUTION
7054:out of spaceSystem speed digit pool is full.
no more room in digit
pool
7200:entry out of rangeInvalid TARGET value specification.
RS232 value out of rangeTarget value should be 1-4. See:
MENU = 10 (RS232)
7202:inappropriate requestACTION = 0 under MENU = 10
improper procedure(RS232) is invalid.
7203:incorrect entryMENU = 10 (RS232) ACTION = 1
logical channel out of
DATA = must be 1-4 (anything else
range
is...

Page 404

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
7401:incorrectMENU = 10 (RS-232) TARGET = 1
entryACTION = 1 DATA = 1 or 4
data must be 2 or 3(Reassign RS232 connector)
NOTE: Above statement
is wrong. data must be 1
or 4 only
8000:incorrect action numberA blank space is not acceptable.
can’t contain space
8001:incorrect action number3 digits must be entered for this
must be 3 digitsitem number.
8002:incorrect entryThe item ars activity area specified
does not...

Page 405

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
POSSIBLE SOLUTION
8111:    incorrect entry           
trunk pool does not exist
Check the original trunk pool
entered against the ARS trunk pool
you are trying administer.
8112:    action number out of  
range
number must be 0-1Only 1 and 0 are valid entries for 
DDD overflow in ARS.
8113:    inappropriate request 
must install pool for this
route memberMust administer an ARS FAC
before trying to administer the FRL.
8201:...

Page 406

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
8402:entry out of rangeThe list number range is between
list reference can’t1-4.
exceed 4
8403:entry out of rangeThe pattern range is 1-8 or 0 for
must be 0-8 for removalremoval.
8404:incorrect entryThe list cannot exceed 4.
list reference can’t
exceed 4
8406:inappropriate requestAll information for the list was
all members of list weredisplayed. There is no more
displayedinformation in the list.
8407:incorrect...

Page 407

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
8418:entry out of rangeMENU = 11 (ARS) ACTlON = 501
list member must be 1DATA = 1 digit value, 1-8 range.
digit; value 1-8
8419:inappropriate requestAll members of the list have already
all members of list were
been displayed.
displayed
8420:
incorrect entryEntered number is not valid;
first digit can’t be O-1 (7recheck number.
digit max)
8421:at installed maxInstalled maximum reached for
-8 phone numberARS-HAC...

Page 408

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
8429:inappropriate requestThe telephone number cannot be
phone number exists-list
removed because it’s installed in list
33.
8430:inappropriate requestThe telephone number cannot be
phone number exists-list
removed because it’s installed in list
44.
8501:incorrect entryThe entered telephone number is
number can’t exceed 7not valid.
digits
8502:inappropriate requestThe telephone number is already in
phone number...

Page 409

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
8700:action number out ofMust enter pattern number first.
sequence
must enter pattern
number first
8701:incorrect action numberGo back and verify the action item
does not exist or used
taken.
improperly
8702:incorrect entry
Pattern number for other area
pattern number does notcodes exception numbers must be
existbetween 1-8.
See: MENU =11 (ARS) ACTION =
800
for more information.
8703:entry out of rangeMust be 8...

Page 410

APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTIONPOSSIBLE SOLUTION
9003:
inappropriate requestMENU =1 (Port) under Special
station to be linked notFeature port.
installedACTION = 1 DATA = 253
ACTION = 2 DATA = PDC or 0
In this case, the PDC is invalid or
does not exist.
9004:inappropriate requestTrying to administer an external
station already assigned
alert to a station that already has
external alertone.
9005:entry out of rangeMENU = 1 (PORT)
pre-night service rings(under special...
Start reading ATT System 25 Installation And Maintenance Manual

Related Manuals for ATT System 25 Installation And Maintenance Manual

All ATT manuals