ATT AUDIX Voice Power Release 2.1.1 Guide

Appendix B: Error Messages
413 (TSM_NO_SCPT_P), MAJOR
TSM: Cannot open script environment param file:
ret= errno=
TSM failed to open the script environment parameters file. The value of
the errno indicates the reason for the error.
n   Ensure that the file “script_param” exists in “/gendb/data.” This
error message is for an unsupported software feature.
It should not appear. If it appears, it does not have serious implications.
For further information, contact your AT&T Field Service Representative.
414...

Appendix B: Error Messages
416 (TSM_INVLD_MSG), INFORM
TSM: lgnored Message from , content ,
chan : 
TSM did not process a message because it was inappropriate. The
message originator, message content, channel number, and reason for
not processing are specified. TSM will continue execution after reporting
the error.
n   This error does not have serious implications, but it should be
reported to your AT&T Field Service Representative.
417 (TSM_NOSPACE), MAJOR
TSM: No space for , errno 
TSM failed to...

Appendix B: Error Messages
Voice Response Output Process (VROP)
549 (VROP_RESIZESP), MAJOR
WARNING:
You may need to increase the number of speech buffers (nbufs)
defined in the file /vs/data/spchconfig.
550 (VROP_BADACT), MAJOR
VROP Activity list is corrupted
The activity list data structure in the VROP process is corrupted.
n    Restart the system if this error continues.
551 (VROP_LRULIST), MAJOR
VROP speech buffer Iru data structure is corrupted
The speech buffer data structures are corrupted.
n...

Appendix B: Error Messages
571 (VROP_CONFIG), MAJOR
VROP Config file  is incorrect
A line in the spchconfig file is invalid.
n     Edit the file /vs/data/spchconfig and fix the line indicated. The file
should contain a line of the form:
nbufs 40
This line tells the system how many speech buffers to allocate in
memory. The number of speech buffers should be a minimum of
2.5 times the number of equipped voice channels. A default value
will be used if no valid value can be found. The system will need to
be...

Appendix B: Error Messages
575 (VROP_UNIXFIO), MAJOR
Error occurred accessing UNIX file 
An error occurred accessing the indicated UNIX system file. This could be
caused by a disk error or by a corrupted UNIX file system.
n      Reboot the UNIX system if you suspect a corrupted UNIX file
system.
577 (VROP_NONEX), MAJOR
Attempt to use non-existent phrase  in talk file 
A script attempted to access the non-existent phrase indicated.
n     Review your applications and obtain and install a replacement...

Appendix B: Error Messages
581 (VROP_TIMEOUT), INFORM
VROP: Timeout detected: action 
A time-out error occurred. These can occur because of other errors in the
system or because of excessive system load.
n       Restart or reboot the system if these errors continue.
582 (VROP_NOACT), MAJOR
VROP: no activity lists are available
The activity list, a data structure used to keep track of speech commands
in progress, has been exhausted causing some play or record operation
to fail.
n     Restart the system if...

Appendix B:  Error Messages
585 (VROP_BADCODE), MAJOR
VROP: Software Error detected: action , type 
A software error was detected.
n      Restart the system if the errors continue and contact your
AT&T Field Service Representative for assistance.
586 (VROP_BADPHR), MAJOR
VROP: phrase  in talk file  is bad
The indicated speech phrase is corrupted.
n      Run audit when convenient. The phrase will need to be recovered
from a speech file system backup.
588 (VROP_NOTIMELIST), INFORM
VROP: no timeout lists...

Appendix B: Error Messages
591 (VROP_PLAY_TMOUT), MAJOR
Play request is not serviced fast enough
A request to play phrases has not been serviced fast enough. The system
load is excessive.
n      Attempt to reduce the load on the system to prevent poor service to
customers.
592 (VROP_CODE_TMOUT), MAJOR
Coding request is not serviced fast enough
A request to record a phrase has not been serviced fast enough. The
system load is excessive.
n      Attempt to reduce the load on the system to prevent poor...

Appendix B: Error Messages 
595 (VROP_BADCMD), INFORM
Unrecognized command received
An unrecognized command has been received by the VROP process.
n     Inform your AT&T Field Service Representative.
596 (VROP_DIORESPAWN), INFORM
DIO process respawned
The DIO process died and respawned.
n      Inform your AT&T Field Service Representative and restart the
system if the error continues.
597 (VROP_TROPEN), MAJOR
Error opening TR device driver
The VROP process failed when opening the IVP (TR) driver. No...

Appendix B:  Error Messages
Error Tracker (ET) Process
601 (SHMEM_SHOW), STATUS
Showing State of ET Shmem (ETCOUNTS)
The user asked the Error Tracker (ET) to display the state of its shared
memory (presumably for debugging purposes). This should not occur
spontaneously.
n     If it appears without being requested, inform your AT&T Field
Service Representative. No need for immediate action.
602 (READ_DB), STATUS
Change to Error Rules Rcved by ET
ET just reread its error rules file because it changed. This...