Aimco Brakes Freedom3 SPC Sqnet User Manual

 
 
   [email protected]     
101  
Freedom³ SPC Setup Menu 
 
 
Freedom³ allows to customize many settings. See below  for enter in the setup and to modify 
every single setting. 
 
 
From main menu of Freedom³ select “Setup” icon: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Then Freedom³ will ask to enter the password to get in. Type the password “1247”. 
It will appear a new window, select setup: 
 
 
  

102 
 
 
 
So, it will appear the setup menu window: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
On the Top of the window is showed the title of the setting, on the bottom  the possible 
selections. To make selection in the menu it’s enough touch the screen. 
Please see table below for the mining of every single argument (setting): 
Arguments (settings) Definition 
Language This setting allows to choose the language: it’s 
possible to select one of the following 
languages: English - Italian – German – French 
–...

 
 
   [email protected]     
103  
Light Intens. This setting allows user to adjust the brightness. 
Light Timeout Freedom³ has two light screen modalities, 
when it’s not used for a specific time (light time 
out) FREEDOM³ goes in energy saving modality 
in order to save battery. 
Last Led% This function allows the operator to light the 
last led when he wants in order to stop in time 
without over-tighten the bolt. For example 
operator can set it at 95% of target  in order to 
stop in time....

104 
 
Freedom³ PRW Setup Menu 
 
 
Freedom³ can be set in different way, for every single modality is necessary to set the wrench in a 
specific way. 
See below to know how to enter in the setup and to set the wrench to work by Bluetooth via “dll”. 
 
 
 
From main manu, select “setup” icon: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
A new window will appear: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Select again the “Setup” icon and type the password “1247” 
 
 
It will be appear  the “Setup” window: 
  

 
 
   [email protected]     
105  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
In the table below are explained all setup items. The item in yellow are for PRW with Bluetooth via 
“dll” version. 
 
Setup Item Meaning 
Set version This item allows to select if the wrench must 
work with a special or default version.  
Language This item allows to choose one of the following 
languages: English; Italian; German; French; 
Portuguese; Spanish. 
Server/Client mode This item allows to configure if the wrench 
must be Client...

106 
 
Setup Item Meaning 
Net Id “Group” identifier for 868 MHY radio 
Node IT “Node” identifier for 868 M:z radio 
Master IT Only for SCS 
Radio Channel Only for SCS 
Radio Power Only for SCS 
Online PerioT Only for SCS 
Has Tool Recognition Enable this item only if the wrench has “socket 
tool recognition” installed on board. 
Tool selects Prog< Enable this item only if the “socket tool” selects 
the program. 
Password per Firmware If is enabled, the wrench will ask for a password 
to change firmware<...

 
 
   [email protected]     
107  
Setup Item Meaning 
Light TimeOut  Freedom³  has 2 different light levels, one is 
standby and the other one is for work modality. 
By this item is possible to set how long the 
wrench waits before to switch from work to 
standby modality when it’s not receiving any 
input. The time is in seconds. 
PowerOff sec.(0=never) If the wrench is not used can switch off 
automatically. Select “0” to disable. The time is 
in second. 
All Misure in Window If this item is enable,...

108 
 
Setup Item Meaning 
Led green at Nom. If enabled, the wrench will light the green led 
when torque or angle target are reached. 
Vibration Enable vibration when target is reached. 
Input Vin If enabled, user must read the Vin number after 
program selection; user must read the Vin 
before program selection; User must read the 
vin when the radio communication is off 
(special system for IVECO)  
BarCode Use Enable only if on the wrench is installed 
barcode reader 
Confirm Scanned String If...

 
 
   [email protected]     
109  
Setup Item Meaning 
Conn. To Schatz Enable to connect Freedom³ with Schatz bench 
(bench for torque/angle calibration) 
Schatz baud Rs232 parameters for connection with Schatz 
bench. 
Fix Cable Port Only for SCS. Used for Freedom³ or EWW³ to 
select the port. 
Plug in Cable Port Only for Freedom³ first generation 
Cradle Input Only for Freedom³ with “R=D” sensor, to 
recognize when Freedom³ is positioned on 
cradle battery charger. 
Adapter Coeff. Mode This setting...

110 
 
Part Numbers 
 
 
Part Numbers Model Description 
113 16 0015 Freedom³ 15 Nm Torque-Angle Wrench 
113 16 0030 Freedom³ 30 Nm Torque-Angle Wrench 
113 16 0070 Freedom³ 70 Nm Torque-Angle Wrench 
113 16 0100 Freedom³ 100 Nm Torque-Angle Wrench 
113 16 0200 Freedom³ 200 Nm Torque-Angle Wrench 
113 16 0300 Freedom³ 300 Nm Torque-Angle Wrench 
113 16 0400 Freedom³ 400 Nm Torque-Angle Wrench 
113 16 0600 Freedom³ 600 Nm Torque-Angle Wrench 
113 16 0800 Freedom³ 800 Nm Torque-Angle Wrench 
113 16 1000...