Aimco Brakes Freedom3 SPC Sqnet User Manual

 
 
   [email protected]     
91  
After clicking, Freedom³ will wait for SQ-Net communication:     
             
      
      
      
      
      
      
      
      
      
      
      
      
    
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

92 
 
STEP -3- 
On PC, in the SQnet main page, click on Freedom³ interface icon: 
 
Freedom³ interface window will appear: 
 
 
 
 
 
 
 
 
A new window will appear (Freedom³ interface communication): 
  

 
 
   [email protected]     
93  
 
 
Select the wrench to download data (The first column on the left identify Freedom³ serial number) 
and  click on:            
    
 to start the communication 
 
 
When communication is finished, in the log window (Freedom³ interface of SQ-Net) it will 
appear the message: “File results.dbf received”. 
 
On Freedom³: 
 
Push  ESC  to exit from synchronization. 
 
 
 
 
 
 
 
 
  

94 
 
 
Freedom³ PRW “How to send data results to SQ-Net” 
 
 
 
 
STEP -1- 
To send back data results  to SQ-Net user must connect Freedom³ to PC by USB 
cable 
 
             
             
             
        
        
        
       
        
        
        
  
 
STEP -2- 
Once USB cable is connected to computer and Freedom³, switch on Freedom³ and from the main 
page select “Synchronize” icon. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
USB CABLE  

 
 
   [email protected]     
95  
 
STEP -3- 
A new window will appear, touch the button “USB/Radio” to start the synchronization: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Subsequently  user must confirm synchronization, pushing confirm button on Freedom³ keyboard: 
 
 
 
 
 
 
 
 
  

96 
 
After selection, Freedom³ will start the synchronization modality: 
 
 
 
The wrench is waiting for communication with SQnet 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
 
   [email protected]     
97  
STEP -4- 
On PC, in the SQ-Net main page, click on Freedom³ interface (PROD) icon: 
 
 
        
             
             
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

98 
 
3STEP -5- 
A new window appears, click on orange arrow to collect data from Freedom³: 
 
    
    
 
   
 
 
On the right part of the window “Logs”, user can check the status of communication: 
 
 
 
   
When SQnet finishes to receive data, on last row of window “Logs” appears “Data reception 
completed”. 
 
 
 
  

 
 
   [email protected]     
99  
Statistic           
 
 
After sending data, it’s possible from the main window of SQ-Net see the statistic of the results 
sent from Freedom³: 
 
 
 
       
       
       
    
User has to select the row with location and test he wants to see, so he can click on statistic icon ( 
as shown in the figure) 
 
 
 
 
 
 
 
 
 
 
 
  

100 
 
 
 
It will appear a new window: 
 
 
 
 
 
From this window is possible to see: 
filter test by date 
Show NOK test 
X/R Charts 
Statistic Control Chart 
Cm/Cp Chart 
Export To Excel