Aimco Brakes Freedom3 SPC Sqnet User Manual
Here you can view all the pages of manual Aimco Brakes Freedom3 SPC Sqnet User Manual. The Aimco Brakes manuals for Torque Measurement are available online for free. You can easily download all the documents as PDF.
Page 101
[email protected] 101 Freedom³ SPC Setup Menu Freedom³ allows to customize many settings. See below for enter in the setup and to modify every single setting. From main menu of Freedom³ select “Setup” icon: Then Freedom³ will ask to enter the password to get in. Type the password “1247”. It will appear a new window, select setup:
Page 102
102 So, it will appear the setup menu window: On the Top of the window is showed the title of the setting, on the bottom the possible selections. To make selection in the menu it’s enough touch the screen. Please see table below for the mining of every single argument (setting): Arguments (settings) Definition Language This setting allows to choose the language: it’s possible to select one of the following languages: English - Italian – German – French –...
Page 103
[email protected] 103 Light Intens. This setting allows user to adjust the brightness. Light Timeout Freedom³ has two light screen modalities, when it’s not used for a specific time (light time out) FREEDOM³ goes in energy saving modality in order to save battery. Last Led% This function allows the operator to light the last led when he wants in order to stop in time without over-tighten the bolt. For example operator can set it at 95% of target in order to stop in time....
Page 104
104 Freedom³ PRW Setup Menu Freedom³ can be set in different way, for every single modality is necessary to set the wrench in a specific way. See below to know how to enter in the setup and to set the wrench to work by Bluetooth via “dll”. From main manu, select “setup” icon: A new window will appear: Select again the “Setup” icon and type the password “1247” It will be appear the “Setup” window:
Page 105
[email protected] 105 In the table below are explained all setup items. The item in yellow are for PRW with Bluetooth via “dll” version. Setup Item Meaning Set version This item allows to select if the wrench must work with a special or default version. Language This item allows to choose one of the following languages: English; Italian; German; French; Portuguese; Spanish. Server/Client mode This item allows to configure if the wrench must be Client...
Page 106
106 Setup Item Meaning Net Id “Group” identifier for 868 MHY radio Node IT “Node” identifier for 868 M:z radio Master IT Only for SCS Radio Channel Only for SCS Radio Power Only for SCS Online PerioT Only for SCS Has Tool Recognition Enable this item only if the wrench has “socket tool recognition” installed on board. Tool selects Prog< Enable this item only if the “socket tool” selects the program. Password per Firmware If is enabled, the wrench will ask for a password to change firmware<...
Page 107
[email protected] 107 Setup Item Meaning Light TimeOut Freedom³ has 2 different light levels, one is standby and the other one is for work modality. By this item is possible to set how long the wrench waits before to switch from work to standby modality when it’s not receiving any input. The time is in seconds. PowerOff sec.(0=never) If the wrench is not used can switch off automatically. Select “0” to disable. The time is in second. All Misure in Window If this item is enable,...
Page 108
108 Setup Item Meaning Led green at Nom. If enabled, the wrench will light the green led when torque or angle target are reached. Vibration Enable vibration when target is reached. Input Vin If enabled, user must read the Vin number after program selection; user must read the Vin before program selection; User must read the vin when the radio communication is off (special system for IVECO) BarCode Use Enable only if on the wrench is installed barcode reader Confirm Scanned String If...
Page 109
[email protected] 109 Setup Item Meaning Conn. To Schatz Enable to connect Freedom³ with Schatz bench (bench for torque/angle calibration) Schatz baud Rs232 parameters for connection with Schatz bench. Fix Cable Port Only for SCS. Used for Freedom³ or EWW³ to select the port. Plug in Cable Port Only for Freedom³ first generation Cradle Input Only for Freedom³ with “R=D” sensor, to recognize when Freedom³ is positioned on cradle battery charger. Adapter Coeff. Mode This setting...
Page 110
110 Part Numbers Part Numbers Model Description 113 16 0015 Freedom³ 15 Nm Torque-Angle Wrench 113 16 0030 Freedom³ 30 Nm Torque-Angle Wrench 113 16 0070 Freedom³ 70 Nm Torque-Angle Wrench 113 16 0100 Freedom³ 100 Nm Torque-Angle Wrench 113 16 0200 Freedom³ 200 Nm Torque-Angle Wrench 113 16 0300 Freedom³ 300 Nm Torque-Angle Wrench 113 16 0400 Freedom³ 400 Nm Torque-Angle Wrench 113 16 0600 Freedom³ 600 Nm Torque-Angle Wrench 113 16 0800 Freedom³ 800 Nm Torque-Angle Wrench 113 16 1000...