Yamaha Ls 9 Service Manual

							
211
LS9-16/LS9-32

4.1.2Format (PARAMETER REQUEST)
ReceiveDatawill be received when [PARAMETER CHANGE Rx] is on and the Devicenumber of both [Rx CH] and SUB STATUS are matched. The data will be echoed when [PARAMETER CHANGE ECHO] is on. The correspondingparameterwillbechangedviaPARAMETERCHANGEimmediatelythedataisreceived.
4.1.3Data category
4.2FUNCTION CALL – LIBRARY STORE, RECALL –
4.2.1 Format (PARAMETER CHANGE)
ReceiveDatawill be received when [PARAMETER CHANGE Rx] is on and the Devicenumber of both [Rx CH] and SUB STATUS are matched. The data will be echoed when [PARAMETER CHANGE ECHO] is on. The correspondingparameterwill be changed immediately the data is received.
TransmissionDatawill be transmittedwith the [DeviceNumber] (MIDI CH) in [Tx CH] when [PARAMETER CHANGE Tx] is on.
4.2.2Function Name
4.2.3Module Name
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0001nnnn3nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATA Category0cccccccccDATA0eeeeeeeehElement no High.
0eeeeeeeelElement no Low.
0iiiiiiiihIndex no High.
0iiiiiiiilIndex no Low.
0cccccccchChannel no High.
0cccccccclChannel no Low.
EOX11110111F7End of exclusive
DATACATEGORYNAME0x0100000001Current Scene/Setup/Backup/User Setup Data
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0001nnnn1nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATA CATEGORY0000000000OTHER DATA
FUNCTION NAME01001100L(ASCII CODE)
01101001i(ASCII CODE)
01100010b(ASCII CODE)
0fffffffff(ASCII CODE)
0fffffffff(ASCII CODE)
0fffffffff(ASCII CODE)
0fffffffff(ASCII CODE)
0fffffffff(ASCII CODE)
MODULE NAME0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
DATA0nnnnnnnnhNumber High
0nnnnnnnnlNumber Low
0cccccccchChannel High
0cccccccclChannel Low
EOX11110111F7End of exclusive
FUNCTION NAMEStore“Lib Str__”Recall“Lib Rcl__”Unknown Factor Store “LibUnStr”Unknown Factor Recall “LibUnRcl”Store Undo (only Scene) “LibStrUd”Recall Undo (only Scene) “LibRclUd”
MODULE NAMEScene“SCENE__”Iuput EQ “INEQ___”Output EQ “OUTEQ__”Dynamics“DYNA___”GEQ“GEQ____”Effect“EFFECT__”
Function Numberchannel*1)tx/rx“LibStr__”  SCENE 1- 300  *5)tx/rxINPUT EQ LIB  41- 199  *1)tx/rxOUTPUT EQ LIB  4- 199  *2) *3) *4)tx/rxDynamics LIB  42- 199  *1) *2) *3) *4) *8)tx/rxGEQ LIB 1- 199  *6)tx/rxEFFECT LIB  58- 199  *7)tx/rx“LibUnStr”  SCENE 1- 300  0txINPUT EQ LIB  41- 199  0txOUTPUT EQ LIB  4- 199  0txDynamics LIB  42- 199  0txGEQ LIB 1- 199  0txEFFECT LIB  58- 199  0tx“LibRcl__”  SCENE 0- 300  *5)tx/rxINPUT EQ LIB  1- 199  *1)tx/rxOUTPUT EQ LIB  1- 199  *2) *3) *4)tx/rxDynamics LIB  1- 199  *1) *2) *3) *4) *8)tx/rxGEQ LIB 0- 199  *6)tx/rxEFFECT LIB  1- 199  *7)tx/rx“LibUnRcl”  SCENE 0  *5)txINPUT EQ LIB  0  *1)txOUTPUT EQ LIB  0  *2) *3) *4)txDynamics LIB  0  *1) *2) *3) *4) *8)txGEQ LIB 0  *6)txEFFECT LIB  0  *7)tx“LibStrUd”  SCENE 0  0“LibRclUd”  SCENE 0  0
*1)0:CH1–63:CH6464:ST IN 1L–71:ST IN 4R*2)256:MIX1–271:MIX16*3)512:MATRIX1–519:MATRIX8*4)1024:STEREO L–1026:MONO(C)*5)512:will be used if the recalling or storing data is only one.*6)0:RACK1–7:RACK8  If a GEQ is mounted in RACK 1–8.*7)0:RACK5–3:RACK8  If an effect is mounted in RACK 5–8.*8)1280:CH 1–1343:CH 641344:STIN 1L–1351:STIN 4R(Dynamics2) 
						

							
LS9-16/LS9-32
212

4.3FUNCTION CALL – LIBRARY EDIT –
4.3.1Format (PARAMETER CHANGE)
ReceiveDatawill be received when [PARAMETER CHANGE Rx] is on and the Devicenumber of both [Rx CH] and SUB STATUS are matched. The data will be echoed when [PARAMETER CHANGE ECHO] is on. The correspondingmemory/librarywill be changed immediately the data is received.
TransmissionPARAMETER CHANGE will be sent in replytoRequest.If [PARAMETERCHANGE ECHO] is on, the message will be sent as it is.
4.3.2Function Name
4.3.3Module Name
4.4FUNCTION CALL – LIBRARYATTRIBUTE –
4.4.1Format (PARAMETER CHANGE)
ReceiveDatawill be received when [PARAMETER CHANGE Rx] is on and the Devicenumber of both [Rx CH] and SUB STATUS are matched. The data will be echoed when [PARAMETER CHANGE ECHO] is on. The correspondingmemory/library title will be changed immediately the data is received.
TransmissionPARAMETER CHANGE will be sent in replytoRequest.If [PARAMETERCHANGE ECHO] is on, the message will be sent as it is.
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0001nnnn1nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0000000000OTHER DATA
FUNCTIONNAME01001100L(ASCII CODE)
01101001i(ASCII CODE)
01100010b(ASCII CODE)
0fffffffff(ASCII CODE)
0fffffffff(ASCII CODE)
0fffffffff(ASCII CODE)
0fffffffff(ASCII CODE)
0fffffffff(ASCII CODE)
MODULE NAME0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
DATA0sssssssshnumber -source start High
0sssssssslnumber -source start Low
0eeeeeeeehnumber -source end High
0eeeeeeeelnumber -source end Low
0ddddddddhnumber -destination start High
0ddddddddlnumber -destination to start Low
EOX11110111F7End of exclusive
SourcestartSourceendDestinationstartCopy“LibCpy__”  Valid  –  –Paste“LibPst__”  – –  ValidClear“LibClr__”  Valid  –  –Cut“LibCut__”  Valid  –  –Insert“LibIns__”  – –  ValidEdit Undo “LibEdtUd”  – –  –
MODULE NAMEfunctionSCENE LIB “SCENE___”  Copy, Paste, Clear, Cut, Insert,EditUndoINPUT EQ LIB  “INEQ____”  Only CopyOUTPUT EQ LIB  “OUTEQ___”  Only CopyDynamics LIB  “DYNA____”  Only CopyGEQ LIB “GEQ_____”  Only CopyEFFECT LIB “EFFECT__”  Only Copy
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0001nnnn1nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0000000000OTHER DATA
FUNCTIONNAME01001100L(ASCII CODE)
01101001i(ASCII CODE)
01100010b(ASCII CODE)
01000001A(ASCII CODE)
01110100t(ASCII CODE)
01110010r(ASCII CODE)
01100010b(ASCII CODE)
01110100t(ASCII CODE)
MODULE NAME0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
DATA0nnnnnnnnhScene/Library number High
0nnnnnnnnlScene/Library number Low
0eeeeeeeehElement High
0eeeeeeeelElement Low
0iiiiiiiihIndex High
0iiiiiiiilIndex Low
0cccccccchChannel High
0cccccccclChannel Low
0000ddddddData28–31bit
0dddddddddData21–27bit
0dddddddddData14–20bit
0dddddddddData7–13bit
0dddddddddData0–6bit
EOX11110111F7End of exclusive
FUNCTIONNAME 
						

							
213
LS9-16/LS9-32

4.4.2Format (PARAMETER REQUEST)
ReceiveThePARAMETER CHANGE will be sent with Devicenumber [Rx CH] immediately the data is received.
4.4.3Module Name
4.5EXIST LIBRARY RANGE
4.5.1Format (PARAMETER CHANGE)
TransmissionWhenLS9receivesLibraryExistrequestcommandfromoutside,theanswerwillbe sent back with the followingParameterchange.This packet shows smallest librarynumberrange that exists and not read only.Topnumber is requestednumber or more.
-Example-SCENE is stored 5,6,7,10,100 and 101RequestNumber:0Data:Valid,TopNumber: 5, End Number 7RequestNumber: 8Data:Valid,TopNumber: 10, End Number 10RequestNumber: 11Data:Valid,TopNumber: 100, End Number 101RequestNumber: 102 Data:Invalid,TopNumber: 0, End Number 0
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0011nnnn3nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0000000000OTHER DATA
FUNCTIONNAME01001100L(ASCII CODE)
01101001i(ASCII CODE)
01100010b(ASCII CODE)
01000001A(ASCII CODE)
01110100t(ASCII CODE)
01110010r(ASCII CODE)
01100010b(ASCII CODE)
01110100t(ASCII CODE)
MODULE NAME0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
DATA0nnnnnnnnhScene/Library number High
0nnnnnnnnlScene/Library number Low
0eeeeeeeehElement High
0eeeeeeeelElement Low
0iiiiiiiihIndex High
0iiiiiiiilIndex Low
0cccccccchChannel High
0cccccccclChannel Low
EOX11110111F7End of exclusive
MODULE NAMEnumbersizeSCENE LIB “SCENE___”  0-300 (0:response only)  16INPUT EQ LIB  “INEQ____”  1-199 (1-40:response only)  16OUTPUT EQ LIB  “OUTEQ___”  1-199 (1-3:response only)  16Dynamics LIB  “DYNA____”  1-199 (1-41:response only)  16GEQ LIB “GEQ_____”  0-199 (0:response only)  16EFFECT LIB “EFFECT__”  1-199 (1–57:response only)  16
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0001nnnn1nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0000000000OTHER DATA
FUNCTIONNAME01001100L(ASCII CODE)
01101001i(ASCII CODE)
01100010b(ASCII CODE)
01000101E(ASCII CODE)
01111000x(ASCII CODE)
01101001i(ASCII CODE)
01110011s(ASCII CODE)
01110100t(ASCII CODE)
MODULE NAME0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
DATA0sssssssnnData Status (0:Invalid data,1:Valid Data)
0nnnnnnnnhRequest Number High
0nnnnnnnnlRequest Number Low
0tttttttnhTop Number High
0tttttttnlTop Number Low
0eeeeeeenhEnd Number High
0eeeeeeenlEnd Number Low
EOX11110111F7End of exclusive 
						

							
LS9-16/LS9-32
214

4.5.2Format (PARAMETER REQUEST)
ReceiveThePARAMETER CHANGE will be sent with Devicenumber [Rx CH] immediately the data is received.
4.5.3Module Name
4.6FUNCTION CALL – COLLECTION STORE –
4.6.1Format (PARAMETER CHANGE)
TransmissionDatawill be transmittedwith the [DeviceNumber] in [Tx CH] when [PARAMETER CHANGE Tx] is on.
4.6.2Function Name
4.6.3Module Name
4.7FUNCTION CALL – MODULE –
4.7.1Format (PARAMETER CHANGE)
ReceiveDatawill be received when [PARAMETER CHANGE Rx] is on and the Devicenumber of both [Rx CH] and SUB STATUS are matched. The data will be echoedwhen[PARAMETERCHANGEECHO]ison. Thecorrespondingeffectwill function immediately the data is received (depending on the effect type).
4.7.2Module Name
Thiswill not work when the Effect Type is different.
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0011nnnn3nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0000000000OTHER DATA
FUNCTIONNAME01001100L(ASCII CODE)
01101001i(ASCII CODE)
01100010b(ASCII CODE)
01000101E(ASCII CODE)
01111000x(ASCII CODE)
01101001i(ASCII CODE)
01110011s(ASCII CODE)
01110100t(ASCII CODE)
MODULE NAME0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
DATA0nnnnnnnnhRequest Number High
0nnnnnnnnlRequest Number Low
EOX11110111F7End of exclusive
MODULE NAME numberSCENE LIB “SCENE___”  1-300INPUT EQ LIB  “INEQ____”  41-199OUTPUT EQ LIB  “OUTEQ___”  4-199Dynamics LIB  “DYNA____”  42-199GEQ LIB “GEQ_____”  1-199EFFECT LIB “EFFECT__”  58-199
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0001nnnn1nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0000000000OTHER DATA
FUNCTIONNAME01001100C(ASCII CODE)
01101001o(ASCII CODE)
01100010l(ASCII CODE)
01010101U(ASCII CODE)
01101110n(ASCII CODE)
01010011S(ASCII CODE)
01110100t(ASCII CODE)
01110010r(ASCII CODE)
MODULE NAME0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)
DATA0nnnnnnnnhNumber High
0nnnnnnnnlNumber Low
0cccccccchChannel High
0cccccccclChannel Low
EOX11110111F7End of exclusive
Function Numbertx/rx“ColUnStr”  Setup 0tx User Defined Key  0txProgram Change  0txControl Change  0tx
Module NameMixer Setting “MIXERSET”Outport Setting “OUT_PORT”Monitor Setting “MONITOR_”MIDI Setting “MIDI_SET”Lib Number “LIB_NUM_”Program Change Table “PRGMCHG_”Control Change Table “CTRLCHG_”Preference (Current) “PREF_CUR”Preference (Admin) “PREF_ADM”Preference (Guest) “PREF_GST”User Defined Keys (Current)  “UDEF_CUR”User Defined Keys (Admin) “UDEF_ADM”User Defined Keys (Guest) “UDEF_GST”Custom Fader Layer (Current)  “CFAD_CUR”Custom Fader Layer (Admin)  “CFAD_ADM”Custom Fader Layer (Guest)  “CFAD_GST”User Level (Current) “UKEY_CUR”User Level (Guest) “UKEY_GST”
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0001nnnn1nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0000000000OTHER DATA
FUNCTIONNAME01001101M
01101111o01100100d01000110F01111000x01010100T01110010r01100111gMODULE NAME0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
0mmmmmmmmm(ASCII CODE)
DATA0eeeeeeeeeEffect number (0:RACK5–3:RACK8)
0pppppppppRelease:0, Press:1
EOX11110111F7End of exclusive
MODULE NAME channelFreeze Play button  “FRZPLAY_”  0:RACK5, 2:RACK7Freeze Record button  “FRZREC__”  0:RACK5, 2:RACK7 
						

							
215
LS9-16/LS9-32

4.8FUNCTION CALL – CHANNEL –
4.8.1Pair ON/OFF Trigger Format (PARAMETER CHANGE)
ReceiveDatawill be received when [PARAMETER CHANGE Rx] is on and the Devicenumber of both [Rx CH] and SUB STATUS are matched. The data will be echoed when [PARAMETER CHANGE ECHO] is on.
4.8.2Module Name
4.9 LEVEL METER DATA
4.9.1Format (PARAMETER CHANGE)Whentransmission is enabled byreceivingRequest for LevelMeter, the correspondingmeteringdatawillbesentinevery50millisecondfor10seconds.If metering information is expectedto be continuously sent,Request is needed to be sent in at least every 10 seconds.
ReceiveThe data will be echoed when [PARAMETER CHANGE ECHO] is ON.
TransmissionWhentransmissionisenabledbyreceivingRequest,thecorrespondingmeteringdatawillbesentinconstantintervalforagivenperiodoftime(Theintervalandtimewillvarydependingondevices).Whenrebootedorportsettingischanged,thetransmissionwill be disabled.When [PARAMETER CHANGE ECHO] is on, the message will be sent as it is.
4.9.2Format (PARAMETER REQUEST)
ReceiveDatawill be received when [PARAMETER CHANGE Rx] is on and the Devicenumber of both [Rx CH] and SUB STATUS are matched. The data will be echoed when [PARAMETER CHANGE ECHO] is on. the correspondingmeteringdatawillbesentvia[RxCH]inconstantintervalforagivenperiodoftime(The interval and time will vary depending on devices).WhenAddress UL = 0x7F is received, all metering data transmissionwill be immediately stopped [disabled].
TransmissionWhen [PARAMETER CHANGE ECHO] is on, the message will be sent as it is.
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0001nnnn1nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0000000000OTHER DATA
FUNCTIONNAME01000011C
01101000h01101100l
01010000P01101001i
01110010r01000011C01110000p
MODULE NAME0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)0mmmmmmmmm(ASCII CODE)DATA0sssssssshSource Channel Number H  *1)
0sssssssslSource Channel Number L  *1)
0ddddddddhDestination Channel Number H  *1)
0ddddddddlDestination Channel Number L  *1)
EOX11110111F7End of exclusive
MODULE NAMEPair On (with Copy) “PAIRONCP”Pair On (with Reset Both)  “PAIRONRS”Pair Off“PAIROFF_”
*1)0:CH1–63:CH64256:MIX 1– 271:MIX 16512:MATRIX 1–519:MATRIX 8
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0001nnnn1nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0010000121REMOTE LEVEL METER
DATA0mmmmmmmmmADDRESS UL
0mmmmmmmmmADDRESS LU
0mmmmmmmmmADDRESS LL
0dddddddddData1
::EOX11110111F7End of exclusive
STATUS11110000F0System exclusive message
ID No.0100001143Manufacture’s ID number (YAMAHA)
SUB STATUS0011nnnn3nn=0-15 (Device number=MIDI Channel)
GROUP ID001111103EDigital mixer
MODEL ID0001001012LS9
DATACATEGORY0010000121REMOTE LEVEL METER
DATA0mmmmmmmmmADDRESS UL
0mmmmmmmmmADDRESS LU
0mmmmmmmmmADDRESS LL
0cccccccchCount H
0cccccccclCount L
EOX11110111F7End of exclusive 
						

							
 WARNING
Components  having  special  characteristics  are  marked   and  must  be  replaced  with  parts  having specification equal to those originally installed.
• The numbers “QTY” show quantities for each unit.• The parts with “--” in “PART NO.” are not available as spare parts.• This mark “ } ” in the REMARKS column means these parts are interchangeable.
• The second letter of the shaded (  ) part number is O, not zero.• The second letter of the shaded (  ) part number is I, not one.• 部品価格ランクは、変更になることがあります。• QTY 欄に記されている数字は、各ユニット当たりの使用個数です。• PART NO. が“--”の部品は、サービス用部品として準備されておりません。• REMARKS 欄の「 } 」マークの部品は、併用部品です。• 網掛けの付いた PART NO. の 2 番目の文字は「ゼロ」ではなく、「オー」です。• 網掛けの付いた PART NO. の 2 番目の文字は「イチ」ではなく、「アイ」です。
  印の部品は、安全を維持するために重要な部品です。交換する場合は、安全のために必ず指定の部品をご使用ください。
PARTS LIST
 CONTENTS（目次）
LS9-16 OVERALL ASSEMBLY（LS9-16 総組立） 
...........................................2
LS9-32 OVERALL ASSEMBLY（LS9-32 総組立）  
...........................................4
LS9-16 BOTTOM ASSEMBLY（LS9-16 ボトム Ass'y）  
..................................6
LS9-32 BOTTOM ASSEMBLY（LS9-32 ボトム Ass'y）  
..................................9
LS9-16 CONTROL PANEL ASSEMBLY（LS9-16 コンパネ Ass'y）  
..............12
LS9-32 CONTROL PANEL ASSEMBLY（LS9-32 コンパネ Ass'y）  
..............14
LCD ASSEMBLY（LCD Ass'y）  
.....................................................................16
PN16C CIRCUIT BOARD ASSEMBLY（PN16C ボタン付き）（LS9-16）  
.....18
PN32C CIRCUIT BOARD ASSEMBLY（PN32C ボタン付き）（LS9-32）  
.....19
PNCOM CIRCUIT BOARD ASSEMBLY（PNCOM ボタン付き）  
..................20
PNIN CIRCUIT BOARD ASSEMBLY（PNIN ボタン付）  
...............................21
ELECTRICAL PARTS（電気部品）  
..........................................................22–78
A  :  Australian model
B :  British model
C  :  Canadian model
D  :  German model
E :  European model
F  :  French model
H  :  North European model
I  :  Indonesian model
J  :  Japanese model
K :  Korean modelM :  South African model
O  :  Chinese model
Q  :  South-east Asia model
T  :  Taiwan model
U  :  U.S.A. model
V :  General export model (110V)
W:  General export model (220V)
N,X:  General export model
Y  :  Export model
Notes : DESTINATION ABBREVIATIONS
(LS9-16/LS9-32) 
						

							

LS9-16/LS9-32
 LS9-16 OVERALL ASSEMBLY（LS9-16 総組立）
10
2260
Control panel assembly 16 : See page 12.¢¯ïÍÉ
TTZ
£
52
50
22
20Bottom assembly 16 : See page 6.¢ØÄÜ
TTZ
£
42
40
22
30
70
32
22
Control panel stay R
（コンパネステー R）Control panel stay L
（コンパネステー L） 
						

							

LS9-16/LS9-32
OVERALL ASSEMBLY総 組 立LS9-16--Overall Assembly総 組 立　 Ｌ Ｓ ９ − １ ６ 
(WG83620)10--Control Panel Assembly16コ ン パ ネ Ａ ｓ ｓ ' ｙ １ ６  
(WG83640)20--Bottom Assembly16ボ ト ム Ａ ｓ ｓ ' ｙ １ ６  
(WG83680)22WE978000Bonding Tapping Screw-S3.0X6 MFZN2B3Ｓ タ イ ト ＋ Ｂ Ｏ Ｎ Ｄ1501
*30W J 3 1 2 4 0 0Side Panel LLEFTサ イ ド パ ネ ル Ｌ 塗 装 品*32WE995800Bind Head Tapping Screw-S4.0X20 MFZN2B3Ｓ タ イ ト ＋ Ｂ Ｉ Ｎ Ｄ4
*40W J 3 1 2 5 0 0Side Panel RRIGHTサ イ ド パ ネ ル Ｒ 塗 装 品*42WE995800Bind Head Tapping Screw-S4.0X20 MFZN2B3Ｓ タ イ ト ＋ Ｂ Ｉ Ｎ Ｄ450V Z 6 7 8 5 0 0IF PlateＩ Ｆ プ レ ー ト0552WE924200Bind Head Screw4.0X12 MFZN2B3 IT小 ネ ジ ＋ Ｂ Ｉ Ｎ Ｄ20160--LCD LabelＬ Ｃ Ｄ ラ ベ ル  
(V218020)70V N 1 0 3 5 0 0Lithium BatteryCR2032リ チ ウ ム 電 池03
ACCESSORIES付 属 品V T 1 1 9 8 0 0AC CordJ 7A 125V 3P 2.5m電 源 コ ー ドJ06WC249500AC CordU 3P 10A電 源 コ ー ドU,C05WC249600AC CordE 3P 10A電 源 コ ー ドH,K,W05WE667300AC CordBS電 源 コ ー ドB09WC901300AC Cord SetCHN 3P 2.5m電 源 コ ー ド セ ッ トO10
TOOLS工 具*W J 7 2 4 1 0 0Control Panel Stay LLEFTコ ン パ ネ ス テ ー　 Ｌ*W J 7 2 4 2 0 0Control Panel Stay RRIGHTコ ン パ ネ ス テ ー　 ＲA A X 5 9 9 2 0MY SLOT Check Jig Ver.2Ｍ Ｙ ス ロ ッ ト 検 査 治 具41
REF NO.PART NO.DESCRIPTION部 品 名REMARKSQTYRANK
*: New PartsRANK: Japan only 
						

							

LS9-16/LS9-32
 LS9-32 OVERALL ASSEMBLY（LS9-32 総組立）
10Control panel assembly 32 : See page 14.¢¯ïÍÉ
TTZ
£
22
22
22
60
42
40
22
20
30
32
Bottom assembly 32 : See page 9.¢ØÄÜ
TTZ
£
52
70
50
Control panel stay R
（コンパネステー R）Control panel stay L
（コンパネステー L） 
						

							

LS9-16/LS9-32
OVERALL ASSEMBLY総 組 立LS9-32--Overall Assembly総 組 立　 Ｌ Ｓ ９ − ３ ２ 
(WG83630)10--Control Panel Assembly32コ ン パ ネ Ａ ｓ ｓ ' ｙ ３ ２  
(WG83650)20--Bottom Assembly32ボ ト ム Ａ ｓ ｓ ' ｙ ３ ２  
(WG83690)22WE978000Bonding Tapping Screw-S3.0X6 MFZN2B3Ｓ タ イ ト ＋ Ｂ Ｏ Ｎ Ｄ2101
*30W J 3 1 2 4 0 0Side Panel LLEFTサ イ ド パ ネ ル Ｌ 塗 装 品*32WE995800Bind Head Tapping Screw-S4.0X20 MFZN2B3Ｓ タ イ ト ＋ Ｂ Ｉ Ｎ Ｄ4
*40W J 3 1 2 5 0 0Side  Panel RRIGHTサ イ ド パ ネ ル Ｒ 塗 装 品*42WE995800Bind Head Tapping Screw-S4.0X20 MFZN2B3Ｓ タ イ ト ＋ Ｂ Ｉ Ｎ Ｄ450V Z 6 7 8 5 0 0IF PlateＩ Ｆ プ レ ー ト20552WE924200Bind Head Screw4.0X12 MFZN2B3 IT小 ネ ジ ＋ Ｂ Ｉ Ｎ Ｄ40160--LCD LabelＬ Ｃ Ｄ ラ ベ ル  
(V218020)70V N 1 0 3 5 0 0Lithium BatteryCR2032リ チ ウ ム 電 池03
ACCESSORIES付 属 品V T 1 1 9 8 0 0AC CordJ 7A 125V 3P 2.5m電 源 コ ー ドJ06WC249500AC CordU 3P 10A電 源 コ ー ドU,C05WC249600AC CordE 3P 10A電 源 コ ー ドH,K,W05WE667300AC CordBS電 源 コ ー ドB09WC901300AC Cord SetCHN 3P 2.5m電 源 コ ー ド セ ッ トO10
*WH260200Dust Proof Coverダ ス ト カ バ ー
OPTIONS別 売 品V 9 8 1 0 0 0 0Goose Neck Lamp Assembly12V 5W JL316A0-18"ラ ン プ　 １ ２ Ｖ16aA A X 5 8 1 2 0Lamp Shadeラ ン プ シ ェ ー ド06bA A X 5 8 1 3 0Bulb12V/DC 5W電 球02
TOOLS工具*W J 7 2 4 1 0 0Control Panel Stay LLEFTコ ン パ ネ ス テ ー　 Ｌ*W J 7 2 4 2 0 0Control Panel Stay RRIGHTコ ン パ ネ ス テ ー　 ＲA A X 5 9 9 2 0MY SLOT Check Jig Ver.2Ｍ Ｙ ス ロ ッ ト 検 査 治 具241
REF NO.PART NO.DESCRIPTION部 品 名REMARKSQTYRANK
*: New PartsRANK: Japan only