Yamaha Dvx 1000 Owners Manual

Effects Parameters321
DM1000 Version 2—Owner’s Manual
Appendix
COMP 5.1
Six input, six output compressor for 5.1 surround, 
with individual solo for each band, and gain reduc-
tion metering of left and right (L+R), left surround 
and right surround (LS+RS), center (C), or LFE 
channels.
COMPAND 5.1
Six input, six output compander for 5.1 surround, 
with individual solo for each band, and gain reduc-
tion metering of left and right (L+R), left surround 
and right surround (LS+RS), center (C), or LFE...

322Appendix A: Parameter Lists
DM1000 Version 2—Owner’s Manual
Effects and tempo synchronization
Some of the DM2000’s effects allow you to synchronize the effect with the tempo. There are two such types of effect; delay-type 
effects and modulation-type effects. For delay-type effects, the delay time will change according to the tempo. For modulation-type 
effects, the frequency of the modulation signal will change according to the tempo.
•Parameters related to tempo synchronization
The following five...

Preset EQ Parameters323
DM1000 Version 2—Owner’s Manual
Appendix
Preset EQ Parameters
#TitleParameter
LOW L-MID H-MID HIGH
01Bass Drum 
1PEAKING PEAKING PEAKING H.SHELF
G
+3.5 dB –3.5 dB 0.0 dB +4.0 dB
F
100 Hz 265 Hz 1.06 kHz 5.30 kHz
Q
1.2 10 0.9 —
02Bass Drum 
2PEAKING PEAKING PEAKING LPF
G
+8.0 dB –7.0 dB +6.0 dB ON
F
80 Hz 400 Hz 2.50 kHz 12.5 kHz
Q
1.4 4.5 2.2 —
03Snare 
Drum 1PEAKING PEAKING PEAKING H.SHELF
G
–0.5 dB 0.0 dB +3.0 dB +4.5 dB
F
132 Hz 1.00 kHz 3.15 kHz 5.00 kHz
Q
1.2 4.5 0.11 —...

324Appendix A: Parameter Lists
DM1000 Version 2—Owner’s Manual
Preset Gate Parameters 
(fs = 44.1 kHz)
27Female Vo. 
1PEAKING PEAKING PEAKING PEAKING
G
–1.0 dB +1.0 dB +1.5 dB +2.0 dB
F
118 Hz 400 Hz 2.65 kHz 6.00 kHz
Q
0.18 0.45 0.56 0.14
28Female Vo. 
2L.SHELF PEAKING PEAKING H.SHELF
G
–7.0 dB +1.5 dB +1.5 dB +2.5 dB
F
112 Hz 335 Hz 2.00 kHz 6.70 kHz
Q
—0.16 0.2 —
29Chorus & 
HarmoPEAKING PEAKING PEAKING PEAKING
G
–2.0 dB –1.0 dB +1.5 dB +3.0 dB
F
90 Hz 850 Hz 2.12 kHz 4.50 kHz
Q
2.8 2 0.7 7
30
Total...

Preset Compressor Parameters (fs = 44.1 kHz)325
DM1000 Version 2—Owner’s Manual
Appendix
Preset Compressor Parameters (fs = 44.1 kHz)
#Title Type Parameter Value
1
CompCOMPThreshold (dB) –8
Ratio (   :1) 2.5
Attack (ms) 60
Out gain (dB) 0.0
Knee 2
Release (ms) 250
2
ExpandEXPANDThreshold (dB) –23
Ratio (   :1) 1.7
Attack (ms) 1
Out gain (dB) 3.5
Knee 2
Release (ms) 70
3Compander 
(H)COMPAND-HThreshold (dB) –10
Ratio (   :1) 3.5
Attack (ms) 1
Out gain (dB) 0.0
Width (dB) 6
Release (ms) 250
4Compander...

326Appendix A: Parameter Lists
DM1000 Version 2—Owner’s Manual
21
Strings3COMPThreshold (dB) –17
Ratio (   :1) 1.5
Attack (ms) 76
Out gain (dB) 2.5
Knee 2
Release (ms) 186
22
BrassSectionCOMPThreshold (dB) –18
Ratio (   :1) 1.7
Attack (ms) 18
Out gain (dB) 4.0
Knee 1
Release (ms) 226
23
Syn. PadCOMPThreshold (dB) –13
Ratio (   :1) 2
Attack (ms) 58
Out gain (dB) 2.0
Knee 1
Release (ms) 238
24
SamplingPercCOMPAND-SThreshold (dB) –18
Ratio (   :1) 1.7
Attack (ms) 8
Out gain (dB) –2.5
Width (dB) 18
Release...

Dynamics Parameters327
DM1000 Version 2—Owner’s Manual
Appendix
Dynamics Parameters
The dynamics effects for each channel strip include a Gate section (only for Input Chan-
nels) and a Comp section. The Gate section includes Gate and Ducking types. The Comp 
section includes Compressor, Expander, Compander Hard (COMP. (H)), and Compander 
Soft (COMP. (S)) types.
GATE Section (Only for Input Channels)
GATE
A gate attenuates signals below a set THRESHOLD level by a specified amount (RANGE).
Parameter Range...

328Appendix A: Parameter Lists
DM1000 Version 2—Owner’s Manual
DUCKING
Ducking is commonly used for voice-over applications in which the background music 
level is reduced automatically when an announcer speaks. When the KEY IN source signal 
level exceeds the specified THRESHOLD, the output level is attenuated by a specified 
amount (RANGE).
Parameter Range Description
THRESHOLD (dB)–54.0 to 0.0 (541 points)This determines the level of trigger signal (KEY IN) 
required to activate ducking.
RANGE (dB)–70...

Dynamics Parameters329
DM1000 Version 2—Owner’s Manual
Appendix
COMP Section
COMP
The COMP processor attenuates signals above a specified THRESHOLD by a specified 
RATIO. The COMP processor can also be used as a limiter, which, with a RATIO of ∞:1, 
reduces the level to the threshold. This means that the limiter’s output level never actually 
exceeds the threshold.
Parameter Range Description
THRESHOLD (dB)–54.0 to 0.0 (541 points)This determines the level of input signal required to 
trigger the...

330Appendix A: Parameter Lists
DM1000 Version 2—Owner’s Manual
EXPAND
An expander attenuates signals below a specified THRESHOLD by a specified RATIO.
Parameter Range Description
THRESHOLD (dB)–54.0 to 0.0 (541 points)This determines the level of input signal required to 
trigger the expander.
RATIO1.0:1, 1.1:1, 1.3:1, 1.5:1, 
1.7:1, 2.0:1, 2.5:1, 3.0:1, 
3.5:1, 4.0:1, 5.0:1, 6.0:1, 
8.0:1, 10:1, 20:1, ∞:1 
(16 points)This determines the amount of expansion.
ATTACK (ms)0–120 (121 points)This determines how...