Yamaha Dvx 1000 Owners Manual

Dynamics Parameters331
DM1000 Version 2—Owner’s Manual
Appendix
COMPANDER HARD (H)
COMPANDER SOFT (S)
The hard and soft companders combine the effects of the compressor, expander and limiter.
The companders function differently at the following levels:
1 0 dB and higher .................................... Functions as a limiter.
2 Exceeding the threshold....................... Functions as a compressor.
3 Below the threshold and width ........... Functions as an expander.
The hard compander has an...

332Appendix B: Specifications
DM1000 Version 2—Owner’s Manual
Appendix B: Specifications
General Spec
Number of scene memories
99
Sampling FrequencyInternal
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
ExternalNormal rate: 44.1 kHz–10% to 48 kHz+6%
Double rate: 88.2 kHz–10% to 96 kHz+6%
Signal Delayfs=48 kHz
Less than 1.6 ms CH INPUT to OMNI OUT
fs=96 kHz
Less than 0.8 ms CH INPUT to OMNI OUT
Fader
100 mm motorized with touch sense × 17
Fader Resolution+10 to –138, –∞ dB input faders
0 to –138, –∞ dB master faders,...

General Spec333
DM1000 Version 2—Owner’s Manual
Appendix
Input Channel CH1–48Input patch
—
Phase
Normal/reverse
Gate-type
3On/off
Key in: 12 ch Group (1–12, 13–24, 25–36, 37–48)/AUX1–8
Comp-type
4On/off
Key in: self /Stereo Link
Pre EQ/pre fader/post fader
Attenuator
–96.0 to +12.0 dB (0.1 dB step)
EQ4-band PEQ (TYPE1)
5
On/off
Delay
0–43400 samples
On/off
—
Fader
100 mm motorized (INPUT/AUX1–8)
Aux sendOn/off
AUX1–8; pre fader/post fader
SoloOn/off
Pre fader/after pan
Pan
127 positions (Left= 1–63,...

334Appendix B: Specifications
DM1000 Version 2—Owner’s Manual
STEREOComp-type
4On/off
Pre EQ/pre fader/post fader
Attenuator
–96.0 to +12.0 dB (0.1 dB step)
EQ4-band PEQ
5
On/off
On/off
—
Fader
100 mm motorized
Balance
127 positions (Left=1–63, Center, Right=1–63)
Delay
0–29100 samples
MeteringDisplayed on LCD
Peak hold on/off
32-elements x2 LED meters
BUS1–8Comp-type
4On/off
Pre EQ/pre fader/post fader
Attenuator
–96.0 to +12.0 dB (0.1 dB step)
EQ4-band PEQ
5
On/off
On/off
—
Fader
100 mm motorized...

General Spec335
DM1000 Version 2—Owner’s Manual
Appendix
EQ Parameters
Gate Parameters
Power RequirementsU.S./Canada
120 V, 60 Hz 135 W
Other
220–240 V, 50/60 Hz 135 W
Dimensions (H x D x W)200 x 585 x 436 mm (7.8 x 23.0 x 17.1)
With MB1000 and SP1000 installed: 295 x 635 x 486 mm (11.6 x 25.0 x 
19.1)
Net weight
20 kg (75 lbs)
Operating free-air temperature range
10–35°C (50–95°F)
Storage temperature range
–20 to 60°C (–4 to 140°F)
Supplied AccessoriesAC Cable, CD-ROM (Studio Manager), Owner’s Manual,...

336Appendix B: Specifications
DM1000 Version 2—Owner’s Manual
Comp Parameters
CompressorThreshold
–54 dB to 0 dB (0.1 dB step)
Ratio (x :1)
x=1, 1.1, 1.3, 1.5, 1.7, 2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 20, ∞ (16 points)
Out gain
0 dB to +18 dB (0.1 dB step)
Knee
Hard, 1, 2, 3, 4, 5 (6 step)
Attack
0 ms–120 ms (1 ms step)
Release5 ms–42.3 s (160 points) @ 48 kHz
6 ms–46.0 s (160 points) @ 44.1 kHz
3 ms–21.1 s (160 points) @ 96 kHz
3 ms–23.0 s (160 points) @ 88.2 kHz
ExpanderThreshold
–54 dB to 0 dB (0.1 dB...

Libraries
 337 
DM1000 Version 2—Owner’s Manual 
Appendix
 Libraries
Analog Input Spec 
In these specifications, when dB represents a specific voltage, 0 dB is \
referenced to 0.775 Vrms.
All input AD converters (INPUT 1–16, OMNI INPUT 1–4, TALKBACK) a\
re 24-bit linear, 128-times oversampling. (@fs=44.1, 
48 kHz)
+48 V DC (phantom power) is supplied to CH INPUT (1–16) XLR type \
connectors via individual switches. Analog Output Spec 
In these specifications, when dB represents a specific voltage, 0 dB...

338Appendix B: Specifications
DM1000 Version 2—Owner’s Manual
Digital Input Spec
Digital Output Spec
Input Format Data length Level Connector
2TR IN DIGITAL1
AES/EBU 24-bit RS422
XLR-3-31 type (Balanced)
1
1. XLR-3-31 type connectors are balanced (1=GND, 2=HOT, 3=COLD).2
IEC-60958 24-bit 0.5 Vpp/75 ΩPhono
Output Format Data length Level Connector
2TR OUT DIGITAL1AES/EBU
1
 Professional use
1. Channel status of 2TR OUT DIGITAL 1
Type: linear PCM
Emphasis: NO
Sampling rate: depends on the internal...

I/O Slot Spec (1–2)339
DM1000 Version 2—Owner’s Manual
Appendix
I/O Slot Spec (1–2)
Each I/O SLOT accepts a digital interface card. SLOT #1 has a serial interface.
Control I/O Spec
Maker Model Function INPUTOUTPUT 1
1. Selectable from STEREO/BUS/AUX/DIRECT/EXT INSERT/SURROUND MONITOR/CR MON\
ITOR.
Details depend on each interface card.
Format Resolution Frequency
The 
number of  Avai lable 
cards
Note
Y amaha MY8-AT
Digital I/O 88
ADAT
24 bit44.1/48 kHz
2Can handle 
24 bit/96 kHz by 
double channel mode...

340Appendix B: Specifications
DM1000 Version 2—Owner’s Manual
REMOTE Port
CONTROL Port
Pin Signal Pin Signal1 GND 6
RX+/GND
1
2RX–/RX–1
1. RS422 (for AD8HR, AD824)/SONY 9 pin pro-
tocol (P2), ESAM II 7
RTS/RX+
1
3
TX–/TX+18CTS/TX–1
4 TX+/GND19GND
5 N.C.
Pin Signal Pin Signal 1 GPO0 14 GPO1
2 GPO2 15 GPO3
3 GPO4 16 GPO5
4 GPO6 17 GPO7
5 GND 18 GND
6 GND 19 GND
7 GND 20 GND
8 GND 21 +5V
9 +5V 22 GPI0
10 GPI1 23 GPI2
11 GPI3 24 N.C.
12 N.C. 25 N.C.
13 N.C.