Yamaha Dvx 1000 Owners Manual

MIDI Data Format371
DM1000 Version 2—Owner’s Manual
Appendix
2.12.3.13 Parameter change (Function call: Scene/Library 
Clear)
Reception
When this is received, the specified memory/library will be cleared. If \
this is re-
ceived from Studio Manager or Cascade Link, the operation will be execut\
ed, 
and then the result of execution will be transmitted as the following pa\
rameter 
response.
Transmission
When a memory or library is cleared on the DM1000, this message will be \
trans-
mitted with the...

372Appendix C: MIDI
DM1000 Version 2—Owner’s Manual
2.12.3.18 Parameter change (Function call: pair, copy)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, pairing will be enabled/disabled for the specified channel. 
*1) 0:CH1 – 47:CH48, 128:BUS1 – 135:BUS8, 256:AUX1 – 263:AUX8, 
512:STEREO
Effect is 0:Effect 1–3:Effect 4
•In the case of PAIR, you must...

MIDI Data Format373
DM1000 Version 2—Owner’s Manual
Appendix
2.12.3.24 Parameter request (Remote Meter)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the 
device number included in the SUB STATUS. This is echoed if [Parameter 
change ECHO] is ON.
When this is received, data of the specified address is transmitted on the [Rx 
CH] at intervals of 50 msec as a rule (although this may not be the case if the 
port is being used by other communication), for a period of 10...

374Appendix D: Options
DM1000 Version 2—Owner’s Manual
Appendix D: About Optional Product
MB1000 Peak Meter Bridge
Installing the Meter Bridge
1Attach the brackets to the meter bridge.
Align the holes on the lower part of the meter bridge with the holes on the upper part of the 
brackets (as shown in the illustration below), then use four 8 mm screws (
1) included in 
the MB1000 package to affix the brackets to the meter bridge.
2Install the meter bridge to the DM1000 following the steps below:
a) Insert...

MB1000 Peak Meter Bridge375
DM1000 Version 2—Owner’s Manual
Appendix
Meter Bridge Controls
AChannel indicators
These indicators display the channels for which the lev-
els are currently displayed (Input Channels 1-16, 17-32, 
33-48, Aux Outs 1-8, Bus Outs 1-8).
BINPUT METERING POSITION indicators
These indicators display the current metering position 
specified for the Input Channels.
COUTPUT METERING POSITION indicators
These indicators display the current metering position 
specified for the Output...

376Appendix D: Options
DM1000 Version 2—Owner’s Manual
Rack Mounting the MB1000 Using Rack Angle Brackets
You can rack mount the MB1000 meter bridge using the rack angle brackets that came with 
the meter bridge.
1Detach the MB1000 from the DM1000. Also, remove the SP1000 side panels 
if they are attached.
2Hold a rack bracket against one side of the meter bridge so that the rack 
angle bracket ear projects to the side, and align two holes on the brackets 
with the holes on the side of the meter bridge,...

Installing the SP1000 Side Panels377
DM1000 Version 2—Owner’s Manual
Appendix
Installing the SP1000 Side Panels
The figure below illustrates how to attach the left side panel to the DM1000. Attach the right 
side panel to the DM1000 in the same way.
Rack Mounting the DM1000 Using the RK1 Rack Mount 
Kit
You can rack mount the DM1000 using the optional RK1 Rack Mount Kit.
1Remove the side panels if they are attached.
2Hold one of the brackets against one side of the DM1000 so that the bracket 
ear projects...

378Index
DM1000 Version 2—Owner’s Manual
Index
Symbols
ø/INS/DLY | DLY 1-16 page .............. 63
ø/INS/DLY | DLY 17-32 page
 ............ 63
ø/INS/DLY | DLY 33-48 page
 ............ 63
ø/INS/DLY | Insert page
 ................... 116
ø/Ins/Dly | Insert page
 ...................... 158
ø/INS/DLY | Out Dly page
 ........... 83, 95
ø/INS/DLY | Phase page
 ..................... 63
ø/INSERT/DELAY button
 ................. 19
+48V ON/OFF switches
 ..................... 16
Phantom power...

Index379
DM1000 Version 2—Owner’s Manual
Channel Copy Parameter preference
................................................ 269
Channel faders
 ..................................... 17
Channel ID/Channel preference
 ...... 268
Channel library
 .................................. 175
Channel strip section
 .......................... 17
CHORUS
 ........................................... 311
CHORUS 5.1
 ..................................... 320
CLEAR button
 ..................................... 24
Clear...

380Index
DM1000 Version 2—Owner’s Manual
FB.GAIN .............................................. 64
Features
 ................................................ 13
Automix
 ........................................ 14
Channel configuration
 ................. 14
Effects
 ............................................ 14
ESAM
 ............................................ 14
Hardware
 ...................................... 13
Inputs and Outputs
 ...................... 13
MIDI...