Yamaha Dvx 1000 Owners Manual

MIDI Data Format361
DM1000 Version 2—Owner’s Manual
Appendix
Transmission
If [TABLE] is selected, operating a parameter specified in the [Control assign ta-
ble] will cause these messages to be transmitted if [Control Change Tx] is ON. 
The parameters that can be specified are defined in the Control Change Assign 
Parameter List.
If [NRPN] is selected, operating a specified parameter will cause data to be 
transmitted on the [Tx CH] if [Control Change Tx] is ON, using the four mes-
sages NRPN control...

362Appendix C: MIDI
DM1000 Version 2—Owner’s Manual
Transmission
This message is transmitted on the [Tx CH] by key operations in the [MI-
DI]-[BULK DUMP] screen.
A bulk dump is transmitted on the [Rx CH] in response to a bulk dump request.
The data area is handled by converting seven words of 8-bit data into eight 
words of 7-bit data.
Conversion from actual data into bulk data
d[0~6]: actual data
b[0~7]: bulk data
b[0] = 0;
for( I=0; I

MIDI Data Format363
DM1000 Version 2—Owner’s Manual
Appendix
2.12.2.6 User Defeined MIDI Remote bulk dump request 
format
The second and third bytes of the DATA NAME indicate the bank number.
2.12.2.7 User Defined Keys bulk dump format
The second and third bytes of the DATA NAME indicate the bank number.
Be aware that the state of the transmission destination will (in some cases) 
change if the same bank is being used.
2.12.2.8 User Defined Keys bulk dump request format
The second and third bytes of the...

364Appendix C: MIDI
DM1000 Version 2—Owner’s Manual
2.12.2.11 Control change table bulk dump format
2.12.2.12 Control change table bulk dump request format
2.12.2.13 Program change table bulk dump format2.12.2.14 Program change table bulk dump request format
2.12.2.15 Equalizer library bulk dump format
The second and third bytes of the DATA NAME indicate the bank number.
0:Library no.1 – 199:Library no.200,
256:CH1 – 303:CH48, 384:BUS1 – 391:BUS8, 512:AUX1 – 519:AUX8, 768:STE-
REO, 8192:UNDO
256 and...

MIDI Data Format365
DM1000 Version 2—Owner’s Manual
Appendix
2.12.2.17 Compressor library bulk dump format
The second and third bytes of the DATA NAME indicate the library number.\
0:Library no.1 – 127:Library no.128,
256:CH1 – 303:CH48, 384:BUS1 – 391:BUS8, 512:AUX1 – 519:AUX8, 7\
68:STE-
REO, 8192:UNDO
256 and following are data for the corresponding channel of the edit buf\
fer.
For reception by the DM1000, only the user area is valid. (36-127, 256-\
)
2.12.2.18 Compressor library bulk dump request...

366Appendix C: MIDI
DM1000 Version 2—Owner’s Manual
2.12.2.22 Effect library bulk dump request format
The second and third bytes of the DATA NAME indicate the library number. 
(See above)
2.12.2.23 Channel library bulk dump format
The second and third bytes of the DATA NAME indicate the library number.
0:Library no.0 – 128:Library no.128,
256:CH1 – 303:CH48, 384:BUS1 – 391:BUS8, 512:AUX1 – 519:AUX8, 768:STE-
REO, 8192:UNDO
256 and following are the data for the corresponding channel of the edit buffer....

MIDI Data Format367
DM1000 Version 2—Owner’s Manual
Appendix
2.12.2.28 Output patch library bulk dump request format
The second and third bytes of the DATA NAME indicate the library number. 
(See above)
2.12.2.29 Bus to Stereo library bulk dump format
The second and third bytes of the DATA NAME indicate the library number.
0:Library no.0 – 32:Library no.32, 256:current data, 8192:UNDO
For reception by the DM1000, only the user area is valid. (1-32, 256, 8192)
2.12.2.30 Bus to Stereo library bulk dump...

368Appendix C: MIDI
DM1000 Version 2—Owner’s Manual
2.12.2.33 Automix bulk dump format
The second byte of the DATA NAME indicates the library number.
0:Library no.1 – 15:Library no.16, 256:current automix data
2.12.2.34 Automix bulk dump request format
The second and third bytes of the DATA NAME indicate the library number. 
(See above)
2.12.2.35 Plug-in effect card bulk dump format
The second byte of the DATA NAME indicates the slot number.
0:SLOT 1 – 1:SLOT 2
The data is not received if the Developer...

MIDI Data Format369
DM1000 Version 2—Owner’s Manual
Appendix
2.12.3.1.2 Parameter Change basic format (Universal 
format)
*) For parameters with a data size of 2 or more, data for that size will be 
transmitted.
2.12.3.1.3 Parameter request basic format
2.12.3.1.4 Parameter request basic format (Universal 
format)
2.12.3.1.5 Parameter Address
Consult your dealer for parameter address details.
2.12.3.2 Parameter change (Edit buffer)2.12.3.3 Parameter request (Edit buffer)
2.12.3.4 Parameter change (Patch...

370Appendix C: MIDI
DM1000 Version 2—Owner’s Manual
2.12.3.8 Parameter change (Backup memory) 
2.12.3.9 Parameter request (Backup memory)
2.12.3.10 Parameter change (Function call: Library store / 
recall)
Reception
When this is received, the specified memory/library will be stored/recal\
led. If 
this is received from Studio Manager or Cascade Link, the operation will\
 be ex-
ecuted, and then the result of execution will be transmitted as a Parame\
ter Re-
sponse.
Transmission
If [Parameter change Tx]...