Yamaha Cl 5 User Guide

							 Data List
38
[Conversion from actual data to bulk data]d[0-6]: actual data
b[0-7]: bulk data
b[0] = 0;
for( I=0; I
						

							 Data List
39
4.2.3 Module Name
*1) 0:CH1 - 71:CH72
72:ST IN 1L - 87:ST IN 8R
*2) 256:MIX 1 - 279:MIX 24
*3) 512:MATRIX 1 - 519:  MATRIX 8
*4) 1024:STEREO L - 1026:STEREO C
*5)  512: will be used if the recalling or storing data is only one.
*6) 0:  GEQ1A, 1:  GEQ1B, 2:  GEQ2A, ... 36:  GEQ19A, 37:GEQ19B
38:  EFFECT GEQ1A, 39:  EFFECT GEQ1B, 
40:  EFFECT GEQ2A, ... 52:  EFFECT GEQ8A, 53:  EFFECT GEQ8B
*7) 0:Effect1- 7:Effect8
*8) 1280:CH1 - 1351:CH72
1352:ST IN 1L - 1367:ST IN 8R
*9) 0:  Premium Rack 1A, 1:  Premium Rack 1B, 
2:  Premium Rack 2A, ... 14:  Premium Rack 8A, 15:  Premium Rack 8B4.3 FUNCTION CALL - LIBRARY EDIT -4.3.1 Format (PARAMETER CHANGE)
ReceptionData will be received when [PARAMETER CHANGE Rx] is on and the Device 
number of both [Rx CH] and SUB STATUS match.
The data will be echoed when [PARAMETER CHANGE ECHO] is on.
The corresponding memory/library will be changed immediately the data is 
received.TransmissionPARAMETER CHANGE will be sent in reply to Request.
If [PARAMETER CHANGE ECHO] is on, the message will be sent as it is.
4.3.2 Function Name
4.3.3 Module Name
Module NameScene “SCENE___”
Input EQ “INEQ____”
Output EQ “OUTEQ___”
Dynamics “DYNA____”
Input CH “INCHNNL_”
Output CH “OUTCHNNL”
GEQ “GEQ_____”
8BandPEQ “8PEQ____”
Effect “EFFECT__”
Portico5033 “P5033___”
Portico5043 “P5043___”
U76 “U76_____”
Opt-2A “OPT-2A__”
EQP-1A “EQ-1A___”
Dynamic EQ “DYNAEQ__”
Buss Comp 369 “BSCMP369”
Dante Input Patch “DANTEIN_”Function
Number
Channel*1)
tx/rx
“LibStr__” SCENE 1-300 *5)tx/rx
INPUT EQ LIB 41-199 *1)
tx/rx
OUTPUT EQ LIB 4-199 *2) *3) *4)
tx/rx
Dynamics LIB 42-199 *1) *2) *3) *4) *8)
tx/rx
INPUT CH LIB 1-199 *1)
tx/rx
OUTPUT CH LIB 1-199 *2) *3) *4)
tx/rx
GEQ LIB 1-199 *6)
tx/rx
8BandPEQ LIB 1-199 *6)
tx/rx
EFFECT LIB 28-199 *7)
tx/rx
Premium Effect LIB 1-100 *9)
tx/rx
Dante Input Patch LIB 1-10 *5)
tx/rx
“LibUnStr” SCENE 1-300 0
tx
INPUT EQ LIB 41-199 0
tx
OUTPUT EQ LIB 4-199 0
tx
Dynamics LIB 42-199 0
tx
INPUT CH LIB 1-199 0
tx
OUTPUT CH LIB 1-199 0
tx
GEQ LIB 1-199 0
tx
8BandPEQ LIB 1-199 0
tx
EFFECT LIB 28-199 0
tx
Premium Effect LIB 1-100 0
tx
Dante Input Patch LIB 1-10 0
tx
“LibRcl__” SCENE 0-300 *5)
tx/rx
INPUT EQ LIB 1-199 *1)
tx/rx
OUTPUT EQ LIB 1-199 *2) *3) *4)
tx/rx
Dynamics LIB 1-199 *1) *2) *3) *4) *8)
tx/rx
INPUT CH LIB 0-199 *1)
tx/rx
OUTPUT CH LIB 0-199 *2) *3) *4)
tx/rx
GEQ LIB 0-199 *6)
tx/rx
8BandPEQ LIB 1-199 *6)
tx/rx
EFFECT LIB 1-199 *7)
tx/rx
Premium Effect LIB 0-100 *9)
tx/rx
Dante Input Patch LIB 0-10 *5) 
tx/rx
“LibUnRcl” SCENE 0 *5)
tx
INPUT EQ LIB 0 *1)
tx
OUTPUT EQ LIB 0 *2) *3) *4)
tx
Dynamics LIB 0 *1) *2) *3) *4) *8)
tx
INPUT CH LIB 0 *1)
tx
OUTPUT CH LIB 0 *2) *3) *4)
tx
GEQ LIB 0 *6)
tx
8BandPEQ LIB 0 *6)
tx
EFFECT LIB 0 *7)
tx
Premium Effect LIB 0 *9)
tx
Dante Input Patch LIB 0 *5) 
tx
“LibStrUd” SCENE 0 0
“LibRclUd” SCENE 0 0STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00000000 00
OTHER DATA
FUNCTION NAME 01001100 “L”
(ASCII CODE)
01101001 “i”
(ASCII CODE)
01100010 “b”
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
Function
Number
Channel*1)
tx/rx
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0sssssss sh
number -source start High
0sssssss sl
number -source start Low
0eeeeeee eh
number -source end High
0eeeeeee el
number -source end Low
0ddddddd dh
number -destination start High
0ddddddd dl
number -destination to start Low
EOX 11110111 F7
End of exclusive
Function NameCopy “LibCpy__”
Paste “LibPst__”
Clear “LibClr__”
Cut “LibCut__”
Insert “LibIns__”
Edit Undo “LibEdtUd”
Module Name
Function
SCENE LIB  “SCENE___” Copy, Paste, Clear, Cut, Insert, EditUndo
INPUT EQ LIB  “INEQ____” Clear Only
OUTPUT EQ LIB  “OUTEQ___” Clear Only
Dynamics LIB  “DYNA____” Clear Only
INPUT CH LIB “INCHNNL_” Clear Only
OUTPUT CH LIB “OUTCHNNL” Clear Only
GEQ LIB “GEQ_____” Clear Only
8BandPEQ LIB “8PEQ____” Clear Only
EFFECT LIB “EFFECT__” Clear Only
Portico5033 LIB “P5033___” Clear Only
Portico5043 LIB “P5043___” Clear Only
U76 LIB “U76_____” Clear Only
Opt-2A LIB “OPT-2A__” Clear Only
EQP-1A LIB “EQ-1A___” Clear Only
DynamicEQ LIB “DYNAEQ__” Clear Only
Buss Comp 369 LIB “BSCMP369” Clear Only
Dante Input Patch LIB “DANTEIN_” Clear Only 
						

							 Data List
40
4.4 FUNCTION CALL - LIBRARY ATTRIBUTE -4.4.1 Format (PARAMETER CHANGE)
ReceptionData will be received when [PARAMETER CHANGE Rx] is on and the Device 
number of both [Rx CH] and SUB STATUS match.
The data will be echoed when [PARAMETER CHANGE ECHO] is on.
When the message is received, the title of the specified memory/library will be 
edited.TransmissionPARAMETER CHANGE will be sent in reply to Request.
If [PARAMETER CHANGE ECHO] is on, the message will be sent as it is.
4.4.2 Format (PARAMETER REQUEST)
ReceptionThe PARAMETER CHANGE will be sent with Device number [Rx CH] immediately 
the data is received.4.4.3 Module Name
4.5 EXIST LIBRARY RANGE4.5.1 Format (PARAMETER CHANGE)
TransmissionWhen CL series receives Library Exist request command from outside, the answer 
will be sent back with the following Parameter change.
This packet shows smallest library number range that exists and not read only. 
Top number is requested number or more.
-Example-
SCENE is stored 5,6,7,10,100 and 101
Request Number:  0 
Data : Valid, Top Number : 5, End Number 7
Request Number:  8
Data : Valid, Top Number : 10, End Number 10
Request Number:  11
Data : Valid, Top Number : 100, End Number 101
Request Number:  102 
Data : Invalid, Top Number : 0, End Number 0
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00000000 00
OTHER DATA
FUNCTION NAME 01001100 “L”
(ASCII CODE)
01101001 “i”
(ASCII CODE)
01100010 “b”
(ASCII CODE)
01000001 “A”
(ASCII CODE)
01110100 “t”
(ASCII CODE)
01110010 “r”
(ASCII CODE)
01100010 “b”
(ASCII CODE)
01110100 “t”
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0nnnnnnn nh
Scene/Library number High
0nnnnnnn nl
Scene/Library number Low
0eeeeeee eh
Element High
0eeeeeee el
Element Low
0iiiiiii ih
Index High
0iiiiiii il
Index Low
0ccccccc ch
Channel High
0ccccccc cl
Channel Low
0000dddd dd
Data28~31bit
0ddddddd dd
Data21~27bit
0ddddddd dd
Data14~20bit
0ddddddd dd
Data7~13bit
0ddddddd dd
Data0~6bit
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0011nnnn 3n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00000000 00
OTHER DATA
FUNCTION NAME 01001100 “L”
(ASCII CODE)
01101001 “i”
(ASCII CODE)
01100010 “b”
(ASCII CODE)
01000001 “A”
(ASCII CODE)
01110100 “t”
(ASCII CODE)
01110010 “r”
(ASCII CODE)
01100010 “b”
(ASCII CODE)
01110100 “t”
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0nnnnnnn nh
Scene/Library number High
0nnnnnnn nl
Scene/Library number Low
0eeeeeee eh
Element High
0eeeeeee el
Element Low
0iiiiiii ih
Index High
0iiiiiii il
Index Low
0ccccccc ch
Channel High
0ccccccc cl
Channel Low
EOX 11110111 F7
End of exclusive
Module Name
Number
SCENE LIB  “SCENE___” 0-300 (0:response only)
INPUT EQ LIB  “INEQ____” 1-200 (1-40:response only)
OUTPUT EQ LIB  “OUTEQ___” 1-200 (1-3:response only)
Dynamics LIB  “DYNA____” 1-200 (1-41:response only)
INPUT CH LIB “INCHNNL_” 0-200 (0:response only)
OUTPUT CH LIB “OUTCHNNL” 0-200 (0:response only)
GEQ LIB “GEQ_____” 0-200 (0:response only)
8BandPEQ LIB “8PEQ____” 0-199 (0:response only)
EFFECT LIB “EFFECT__” 1-200 (1-27:response only)
Portico5033 LIB “P5033___” 0-100 (0:response only)
Portico5043 LIB “P5043___” 0-100 (0:response only)
U76 LIB “U76_____” 0-100 (0:response only)
Opt-2A LIB “OPT-2A__” 0-100 (0:response only)
EQP-1A LIB “EQ-1A___” 0-100 (0:response only)
DynamicEQ LIB “DYNAEQ__” 0-100 (0:response only)
Buss Comp 369 LIB “BSCMP369” 0-100 (0:response only)
Dante Input Patch LIB “DANTEIN_” 0-10 (0:response only)STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00000000 00
OTHER DATA
FUNCTION NAME 01001100 “L”
(ASCII CODE)
01101001 “i”
(ASCII CODE)
01100010 “b”
(ASCII CODE)
01000101 “E”
(ASCII CODE)
01111000 “x”
(ASCII CODE)
01101001 “i”
(ASCII CODE)
01110011 “s”
(ASCII CODE)
01110100 “t”
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE) 
 
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0sssssss ss
Data Status ( 0:Invalid data,1:Valid Data )
0nnnnnnn nh
Request Number High
0nnnnnnn nl
Request Number Low
0ttttttt th
Top Number High
0ttttttt tl
Top Number Low
0eeeeeee eh
End Number High
0eeeeeee el
End Number Low
EOX 11110111 F7
End of exclusive
Module Name
Number 
						

							 Data List
41
4.5.2 Format (PARAMETER REQUEST)
ReceptionThe PARAMETER CHANGE will be sent with Device number [Rx CH] immediately 
the data is received.4.5.3 Module Name
4.6 FUNCTION CALL - COLLECTION STORE -4.6.1 Format (PARAMETER CHANGE)
TransmissionData will be transmitted with the [Device Number] in [Tx CH] when [PARAMETER 
CHANGE Tx] is on.4.6.2 Function Name
4.6.3 Module Name
4.7 FUNCTION CALL - MODULE -4.7.1 Format (PARAMETER CHANGE)
ReceptionData will be received when [PARAMETER CHANGE Rx] is on and the Device 
number of both [Rx CH] and SUB STATUS match.
The data will be echoed when [PARAMETER CHANGE ECHO] is on.
The corresponding effect will function immediately the data is received 
(depending on the effect type).4.7.2 Module NameThis will not work when the Effect Type is different.
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0011nnnn 3n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00000000 00
OTHER DATA
FUNCTION NAME 01001100 “L”
(ASCII CODE)
01101001 “i”
(ASCII CODE)
01100010 “b”
(ASCII CODE)
01000101 “E”
(ASCII CODE)
01111000 “x”
(ASCII CODE)
01101001 “i”
(ASCII CODE)
01110011 “s”
(ASCII CODE)
01110100 “t”
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE) 
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0nnnnnnn nh
Request Number High
0nnnnnnn nl
Request Number Low
EOX 11110111 F7
End of exclusive
Module Name
Number
SCENE LIB  “SCENE___” 1-300
INPUT EQ LIB  “INEQ____” 41-200
OUTPUT EQ LIB  “OUTEQ___” 4-200
Dynamics LIB  “DYNA____” 42-200
INPUT CH LIB “INCHNNL_” 1-200
OUTPUT CH LIB “OUTCHNL” 1-200
GEQ LIB “GEQ_____” 1-200
8BandPEQ LIB “8PEQ____” 1-199
EFFECT LIB “EFFECT__” 55-200
Portico5033 LIB “P5033___” 1-100
Portico5043 LIB “P5043___” 1-100
U76 LIB “U76_____” 1-100
Opt-2A LIB “OPT-2A__” 1-100
EQP-1A LIB “EQ-1A___” 1-100
DynamicEQ LIB “DYNAEQ__” 1-100
Buss Comp 369 LIB “BSCMP369” 1-100
Dante Input Patch LIB “DANTEIN_” 1-10
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00000000 00
OTHER DATA
FUNCTION NAME 01001100 “C”
(ASCII CODE)
01101001 “o”
(ASCII CODE)
01100010 “l”
(ASCII CODE)
01010101 “U”
(ASCII CODE)
01101110 “n”
(ASCII CODE)
01010011 “S”
(ASCII CODE)
01110100 “t”
(ASCII CODE)
01110010 “r”
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0nnnnnnn nh
Number High
0nnnnnnn nl
Number Low
0ccccccc ch
Channel High
0ccccccc cl
Channel Low
EOX 11110111 F7
End of exclusive
Function
Number
tx/rx
“ColUnStr” Setup 0tx
User Defined Key 0
tx
Program Change 0
tx
Control Change 0
tx
Module Name
Mixer Setting “MIXERSET”
Outport Setting “OUT_PORT”
Monitor Setting “MONITOR_”
MIDI Setting “MIDI_SET”
Lib Number “LIB_NUM_”
Program Change Table “PRGMCHG_”
Control Change Table “CTRLCHG_”
Preference (Current) “PREF_CUR”
Preference (Admin) “PREF_ADM”
Preference (Guest) “PREF_GST”
User Defined Keys (Current) “UDEF_CUR”
User Defined Keys (Admin) “UDEF_ADM”
User Defined Keys (Guest) “UDEF_GST”
Custom Fader Bank (Current) “CFAD_CUR”
Custom Fader Bank (Admin) “CFAD_ADM”
Custom Fader Bank (Guest) “CFAD_GST”
User Level (Current) “UKEY_CUR”
User Level (Guest) “UKEY_GST”STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00000000 00
OTHER DATA
FUNCTION NAME 01001101 “M”
01101111 “o”
01100100 “d”
01000110 “F”
01111000 “x”
01010100 “T”
01110010 “r”
01100111 “g”
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0eeeeeee ee
Effect number (0:RACK1-7:RACK8)
0ppppppp pp
Release:0, Press:1
EOX 11110111 F7
End of exclusive
 Module Name
 Number
Freeze Play button “FRZPLAY_” 0:RACK1, 2:RACK3, 4:RACK5, 6:RACK7
Freeze Record button “FRZREC__” 0:RACK1, 2:RACK3, 4:RACK5, 6:RACK7
Module Name 
						

							 Data List
42
4.8  FUNCTION CALL - CHANNEL -4.8.1 Pair ON/OFF Trigger Format (PARAMETER CHANGE)
ReceptionData will be received when [PARAMETER CHANGE Rx] is on and the Device 
number of both [Rx CH] and SUB STATUS match.
The data will be echoed when [PARAMETER CHANGE ECHO] is on.4.8.2 Module Name
*1) 0:CH1 - 71:CH72
256:MIX 1 - 279:MIX 24
512:MATRIX 1-519:MATRIX 8
4.9 LEVEL METER DATA4.9.1 Format (PARAMETER CHANGE)When transmission is enabled by receiving Request for Level Meter, the 
corresponding metering data will be sent in every 50 millisecond for 10 seconds. 
If metering information is expected to be continuously sent, Request is needed to 
be sent in at least every 10 seconds.ReceptionThe data will be echoed when [PARAMETER CHANGE ECHO] is on.TransmissionWhen transmission is enabled by receiving Request, the corresponding metering 
data will be sent in constant interval for a given period of time (The interval and 
time will vary depending on devices).
When rebooted or port setting is changed, the transmission will be disabled.
When [PARAMETER CHANGE ECHO] is on, the message will be sent as it is.4.9.2 Format (PARAMETER REQUEST)
ReceptionData will be received when [PARAMETER CHANGE Rx] is on and the Device 
number of both [Rx CH] and SUB STATUS match.
The data will be echoed when [PARAMETER CHANGE ECHO] is on.
The corresponding metering data will be sent via [Rx CH] in constant interval for 
a given period of time (The interval and time will vary depending on devices).
If this is received with an Address UL = 0x7F, transmission of all meter data will 
stop (will be disabled) immediately.TransmissionWhen [PARAMETER CHANGE ECHO] is on, the message will be sent as it is.
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00000000 00
OTHER DATA
FUNCTION NAME 01000011 “C”
01101000 “h”
01101100 “l”
01010000 “P”
01101001 “i”
01110010 “r”
01000011 “C”
01110000 “p”
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0sssssss sh
Source Channel Number H *1)
0sssssss sl
Source Channel Number L *1)
0ddddddd dh
Destination Channel Number H *1)
0ddddddd dl
Destination Channel Number L *1)
EOX 11110111 F7
End of exclusive
 Module Name
Pair On (with Copy) “PAIRONCP”
Pair On (with Reset Both) “PAIRONRS”
Pair Off “PAIROFF_”
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00100001 21
REMOTE LEVEL METER
DATA 0mmmmmmm mm
ADDRESS UL
0mmmmmmm mm
ADDRESS LU
0mmmmmmm mm
ADDRESS LL
0ddddddd dd
Data1
::
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacturer's ID number (YAMAHA)
SUB STATUS 0011nnnn 3n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
CL Series
DATA CATEGORY 00100001 21
REMOTE LEVEL METER
DATA 0mmmmmmm mm
ADDRESS UL
0mmmmmmm mm
ADDRESS LU
0mmmmmmm mm
ADDRESS LL
0ccccccc ch
Count H
0ccccccc cl
Count L
EOX 11110111 F7
End of exclusive 
						

							 Data List
43 Input/output characteristics
ANALOG INPUT CHARACTERISTICS
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal 
output level when the unit is set to maximum gain. (all faders and level controls are 
maximum position.)
*2. XLR-3-31 type connectors are balanced. (1= GND, 2= HOT, 3= COLD)
* In these specifications, 0dBu= 0.775 Vrms.
* All input AD converters are 24bit linear, 128times oversampling.
* +48V DC ( phantom power ) is supplied to ONI IN (1-8) and TALKBACK XLR type 
connectors via each individual software controlled switches.
ANALOG OUTPUT CHARACTERISTICS
*1. XLR-3-32 type connectors are balanced. (1= GND, 2= HOT, 3= COLD)
*2. PHONES stereo phone jack is unbalanced. (Tip= LEFT, Ring= RIGHT, Sleeve= GND)
*3. There are switches inside the body to preset the maximum output level.
*4. The position of the level control is 10dB lowered from Max.
* In these specifications, 0dBu= 0.775 Vrms.
* All output DA converters are 24bit, 128times oversampling.
DIGITAL INPUT & OUTPUT CHARACTERISTICS
DIGITAL OUTPUT CHARACTERISTICS
*1. Channel Status of DIGITAL OUT
*2. XLR-3-32 type connectors are balanced. (1= GND, 2= HOT, 3= COLD) Input 
Te r m i n a l sGAIN
Actual 
Load 
ImpedanceFor Use 
With 
Nominal
Input Level
Connector
Sensitivity
*1
NominalMax. before 
clip
OMNI IN 
1-8+66dB
7.5kΩ50-600Ω 
Mics & 
600Ω 
Lines-82dBu 
(61.6μV)-62dBu 
(0.616mV)-42dBu 
(6.16mV)
XLR-3-31 type 
(Balanced)
*2
-6dB-10dBu 
(245mV)+10dBu 
(2.45V)+30dBu 
(24.5V)
TALKBACK+64dB
10kΩ50-600Ω 
Mics & 
600Ω 
Lines-70dBu 
(0.245mV)-60dBu 
(0.775mV)-40dBu 
(7.75mV)
XLR-3-31 type 
(Balanced)
*2
+20dB-26dBu 
(38.8mV)-16dBu 
(0.123V)+4dBu 
(1.23V)
Output 
Te r m i n a l sActual 
Source 
Impedanc
e
For Use 
With 
Nominal
GAIN 
SW
*3
Output Level
Connector
NominalMax. before 
clip
OMNI 
OUT 1-875Ω600Ω 
Lines+24dB 
(default)+4dBu 
(1.23V)+24dBu 
(12.3V)
XLR-3-32 type 
(Balanced)
*1
+18dB-2dBu 
(616mV)+18dBu 
(6.16V)
PHONES 15Ω8Ω 
Phones-
75mW
*4
150mW
Stereo Phone Jack 
(TRS) 
(Unbalanced)
*2
40Ω 
Phones-
65mW
*4
150mW
Terminal FormatData 
lengthLevel Audio Connector
Primary/
SecondaryDante24bit or 
32bit1000Base
-T64ch Input/64ch Output 
@48kHzEtherCON Cat5e
Terminal FormatData 
LengthLevel Connector
DIGITAL 
OUT
*1
AES/EBU
AES/EBU Professional Use24bit RS422
XLR-3-32 type (Balanced)
*2
Byte Bit Field Name Fixed/Variable Data Description
00 Block Format
fixed1 professional use
1Mode 0 audio
2-4 Emphasis 0x4 off
5 Fs Lock 0 lock
6-7 Sampling Frequency variable0x0 others
0x3 32 kHz
0x2 44.1 kHz
0x1 48 kHz
10-3 Channel Mode
fixed0x1 2ch mode
4-7 Users Bit Management 0x0 -
20-2 Use of AUX
fixed0x1 24 bits Audio Data
3-7 Source 0x00 -
3 0-7 Multi Channel fixed 0x00 -
40-1 Digital Audio Reference Signal
fixed0x0
-
2- 0
3-6 Sampling Frequency variable 0x0 others
7 Sampling Frequency Scan Flag fixed 0 - 
						

							 Data List
44
I/O SLOT (1-3) CHARACTERISTICSEach I/O Slot accepts a mini-YGDAI card. Only Slot1 has a serial interface.CONTROL I/O CHARACTERISTICS
*1. Input pin: TTL level, w/ internal pull-up (47kΩ)
Output pin: Open drain output (Vmax=12V, maximum sink current/pin=75mA)
Power supply pin: Output voltage Vp=5V, Max. output current Imax=300mA
*2. 4 pin=+12V, 3 pin=GND, Lamp rating 5W. Voltage control by software.Terminal Format Level Connector
MIDIIN MIDI - DIN Connector 5P
OUT MIDI - DIN Connector 5P
WORD 
CLOCKIN - TTL/75Ω terminated BNC Connector
OUT - TTL/75Ω BNC Connector
GPI (5IN/5OUT) - -D Sub Connector 15P 
(Female)
*1
NETWORK IEEE802.3 10BASE-T/100Base-TX RJ-45
LAMP (CL5:  x3, CL3:  
x2, CL1:  x1)-
0V-12V
*2
XLR-4-31 type
*2
USB HOST USB 2.0 - USB A Connector (Female)
DC POWER INPUT - - JL05 Connector
METER (CL3/CL1 only) - -D Sub Connector 9P 
(Female) 
						

							 Data List
45 Electrical Characteristics
All faders are nominal when measured. Output impedance of signal generator:150ohms
Frequency Response. 
Fs= 44.1 kHz or 48 kHz @20 Hz-20 kHz, referenced to 
the nominal output level @1 kHz

Total Harmonic Distortion. 
Fs= 44.1 kHz or 48 kHz
* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz
Hum & Noise. 
Fs= 44.1 kHz or 48 kHz, EIN= Equivalent Input Noise
* Hum & Noise are measured with A-weight filter.
Dynamic Range. 
Fs= 44.1 kHz or 48 kHz
* Dynamic Range are measured with A-weight filter.

Sampling Frequency
Input
Output
RL
Conditions
Min.
Typ.
Max.
Unit
OMNI IN 1-8OMNI OUT 1-8 600 Ω
GAIN:  +66dB-1.5 0.0 0.5
dB
PHONES 8 Ω -3.0  0.0  0.5
Input
Output
RL
Conditions
Min.
Typ.
Max.
Unit
OMNI IN 1-8 OMNI OUT 1-8 600 Ω+4 dBu @20 Hz-20 kHz, GAIN:  +66dB 0.1
% +4 dBu @20 Hz-20 kHz, GAIN:  -6dB 0.05
Internal OSCOMNI OUT 1-8 600 Ω Full Scale Output @1 kHz 0.02
PHONES 8 ΩFull Scale Output @1 kHz, PHONES Level 
Control:  Max.0.2
Input
Output
RL
Conditions
Min.
Typ.
Max.
Unit
OMNI IN 1-8 OMNI OUT 1-8 600 ΩRs= 150 Ω, GAIN:  +66dB
Master fader at nominal level and one 
Ch fader at nominal level. -128
EIN
dBu -62
Rs= 150 Ω, GAIN:  -6dB
Master fader at nominal level and one 
Ch fader at nominal level. -84 -79
All INPUTs  OMNI OUT 1-8 600 ΩRs= 150 Ω, GAIN:  -6dB
Master fader at nominal level and all 
OMNI IN 1-8 in faders at nominal level.-70
- OMNI OUT 1-8 600 Ω Residual Output Noise, ST Master Off -88
-PHONES 8 ΩResidual Output Noise, PHONES Level 
Control Min.-88
Input
Output
RL
Conditions
Min.
Typ.
Max.
Unit
OMNI IN 1-8 OMNI OUT 1-8 600 Ω AD + DA, GAIN:  -6dB 108 dB
- OMNI OUT 1-8 600 Ω DA Converter 112 dB
Parameter
Conditions
Min.
Typ.
Max.
Unit
External ClockFrequency 
Range Fs= 44.1 kHz
Fs= 45.9375 kHz (44.1 kHz +4.1667%)
Fs= 44.1441 kHz (44.1 kHz +0.1%)
Fs= 44.0559 kHz (44.1 kHz -0.1%)
Fs= 42.336 kHz (44.1 kHz -4.0%) 
-200 +200 ppm
Fs= 48 kHz
Fs= 50 kHz (48 kHz +4.1667%)
Fs= 48.048 kHz (48 kHz +0.1%)
Fs= 47.952 kHz (48 kHz -0.1%)
Fs= 46.080 kHz (48 kHz -4.0%)
Jitter of PLLDIGITAL IN Fs= 44.1 kHz
DIGITAL IN Fs= 48 kHz10 ns
Internal ClockFrequencyWord Clock : Int 44.1 kHz 44.1
kHz
Word Clock : Int 48 kHz 48
AccuracyWord Clock : Int 44.1 kHz
-50 +50 ppm
Word Clock : Int 48 kHz
JitterWord Clock : Int 44.1 kHz 4.429
ns
Word Clock : Int 48 kHz 4.069 
						

							 Data List
46 Mixer Basic Parameters

Libraries

Input Function

Output Function

Output Port

Processor
Name
Number
To t a l
Scene Memory Preset 1 + User 300 301
Input CH Library Preset 1 + User 199 200
Output CH Library Preset 1 + User 199 200
Input EQ Library Preset 40 + User 159 199
Output EQ Library Preset 3 + User 196 199
Dynamics Library Preset 41 + User 158 199
Effect Library Preset 27 + User 172 199
GEQ Library Preset 1 + User 199 200
Premium Rack Library
Portico5033
Portico5043
U76
Opt-2A
EQ-1A
Dynamic EQPreset 1 + User 199 200
Dante Input Patch Library Preset 1 + User 10 11
Function
Parameter
Phase Normal/Reverse
Digital Gain -96 dB to +24 dB
L,R-MONO L-MONO/R-MONO/LR-MONO/STEREO IN
HPFSlope= -12dB/Oct, -6dB/Oct
Frequency= 20 Hz to 600 Hz
Attenuator -96 dB to 0 dB
4 Band 
EqualizerFrequency= 20 Hz to 20 kHz
Gain= -18 dB to +18 dB
Q= 0.10 to 10.0
Low Shelving (Low Band)
High Shelving, LPF (High Band)
Type I/Type II
Insert Insert Point:  Pre EQ/Pre Fader/Post On
Direct Out Direct Out Point:  Pre HPF/Pre EQ/Pre Fader/Post On
Dynamics 1Type:  Gate/Ducking/Comp/Expander
Threshold=Gate:  -72 dB to 0 dB
Others:  -54 dB to 0 dB
Ratio= 1:1 to ∞:1
Attack= 0 msec to 120 msec
Hold= 48 kHz:  0.02 msec to 1.96 sec
44.1 kHz:  0.02 msec to 2.13 sec
Decay= 48 kHz:  5 msec to 42.3 sec
44.1 kHz:  6 msec to 46.1 sec
Dynamics 1Releace= 48 kHz:  5 msec to 42.3 sec
44.1 kHz:  6 msec to 46.1 sec
Range= Gate:  -∞ dB to 0 dB
Ducking:  -70 dB to 0 dB
Gain= 0.0 dB to +8dB
Knee= Hard to 5 (soft)
Key In:  Self Pre EQ/Self Post EQ/Mix Out21-24
Ch1-STIN8R (8ch block)
Key In Filter:  HPF/LPF/BPF
Dynamics2Type:  Comp/De-Esser/Compander H/Compander S
Threshold= -54 dB to 0 dB
Ratio= 1:1 to ∞:1
Compander:  1:1 to 20:1
Attack= 0 msec to 120 msec
Release= 48 kHz:  5 msec to 42.3 sec
44.1 kHz:  6 msec to 46.1 sec
Gain= -18 dB to 0 dB, 0 dB to +18 dB
Knee= Hard to 5 (soft)
Key In:  Self Pre EQ/Self Post EQ/Mix Out21-24 
Ch1-STIN8R (8ch block)
Width= 1 dB to 90 dB
Frequency= 1.0 KHz to 12.5KHz
TYPE= HPF, BPF
Q= 0.10 to 10.0
Fader Level:  1024 steps, ∞, -138 dB to +10 dB
On On/Off
Pan/BalancePosition L63 to R63
Pan Mode:  Pan/Balance
DCA Group 16 Groups
Mute Group 8 Groups
Mix Send24 sends
Fix/Variable can be set each two mixes 
(Surround Pan can be set 1 to 6 mixes)
Mix Send Point:  Pre EQ/Pre Fader/Post On
Level:  1024 steps, ∞, -138 dB to +10 dB 
(Position L63 to R63, R63 to F63 for Surround)
Matrix Send8 Sends
Matrix Send Point:  Pre EQ/Pre Fader/Post On
Level:  1024 steps, ∞, -138 dB to +10 dB
LCR Pan CSR= 0% to 100%
DELAY 0 ms to 1000 msec
Function
Parameter
Attenuator -96 dB to 0 dB
Function
Parameter
4 Band 
EqualizerFrequency= 20 Hz to 20 kHz
Gain= -18 dB to +18 dB
Q= 0.10 to 10.0
Low Shelving (Low Band)
High Shelving, LPF (High Band)
Type I/Type II
Insert Insert Point:  Pre EQ/Pre Fader/Post On
Dynamics 1Type:  Comp/Expander/Compander H/Compander S
Threshold= -54 dB to 0 dB
Ratio= 1:1 to ∞:1
Compander:  1:1 to 20:1
Attack= 0 msec to 120 msec
Release= 48 kHz:  5 msec to 42.3 sec
44.1 kHz:  6 msec to 46.1 sec
Gain= -18 dB to 0 dB, 0 dB to +18 dB
Knee= Hard to 5 (soft)
Key In:  Self Pre EQ/Self Post EQ/Mix Out21-24 MIX24/
MTRX1-8/STIN LR/MONO(C) (8ch block)
Width= 1 dB to 90 dB
Fader Level:  1024 steps, ∞, -138 dB to +10 dB
On On/Off
Pan/Balance Position L63 to R63
DCA Group 16 Groups
Mute Group 8 Groups
Mix to Matrix 
Stereo to MatrixMatrix Send Point:  Pre Fader/Post On
Level:  1024 steps, ∞, -138 dB to +10 dB
OscillatorLevel= 0 to -96dB (1 dB step)
On/Off= Software control
Function
Parameter
Out Port Delay 0 msec to 1000 msec
Out Port Phase Normal/Reverse
Gain -96 to +24 dB
Function
Parameter
GEQ 31 bands x 16(24) or 15 bands x 32(48) systems
PEQ (8 bands PEQ + 3 notchs + HPF, LPF) x 32(48) systems
AUTOMIXER 8(16) channels
Effects Stereo In/Stereo Out multi effector x 8 systems
Premium Rack 
ParameterStereo(Dual) In/Stereo(Dual) Out Premium Rack x 
8systems
Function
Parameter 
						

							 Data List
47 Pin Assignment
DC POWER INPUT GPI METER (CL3/CL1 only)
Pin Signal Name Pin Signal Name
1+24V13GND
2+24V14GND
3+24V15GND
4+24V16GND
5+24V17GND
6+24V18GND
7+24V19CAUTION(+)
8 +24V 20 CAUTION(-)
9 +24V 21 DETECT A
10 GND 22 DETECT B
11 GND 23 DETECT GND
12 GND Frame GND
1
2
3 4
5 6 7 8 9
10 11 12 13 14
15
16
17 18 19 20
21
22 23
Pin Signal Name Pin Signal Name
1GPO19GPO2
2GPO310GPO4
3GPO511GND
4GND12GND
5 +5V 13 +5V
6 GPI114GPI2
7 GPI315GPI4
8GPI5
9
10
11 8
1
2
3
15
Pin Signal Name Pin Signal Name
1 RESET 6 +3.3LD
2 SDA 7 +3.3LD
3 DGND 8 LDGND
4SCL9LDGND
5+3.3D
1
6 5
9