Home > Yamaha > Music Mixer > Yamaha Cl 5 User Guide

Yamaha Cl 5 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Yamaha Cl 5 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 255 Yamaha manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 Data List
    18
    AMP SIMULATEOne input, two output guitar amp simulator.COMP276This effect emulates the characteristics of analog compressors that are widely used in 
    recording studios. It produces a thick, strong frame sound suitable for drums and bass. You 
    can control two monaural channels independently.
    COMP276SThis effect emulates the characteristics of analog compressors that are widely used in 
    recording studios. It produces a thick, strong frame sound suitable for drums and bass. You 
    can link and control the L and R channel parameters.COMP260This effect emulates the characteristics of mid 70's compressors/limiters that are the standard 
    for live SR. You can control two monaural channels independently. You can also link several 
    parameters via stereo links.COMP260SThis effect emulates the characteristics of mid 70's compressors/limiters that are the standard 
    for live SR. You can link and control the L and R channel parameters.
    Parameter
    Range
    Description
    AMP TYPE
    *1
    *1. STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMB-DX, CMB-TW, MINI, FLATGuitar amp simulation type
    DST TYPEDST1, DST2, OVD1, 
    OVD2, CRUNCHDistortion type (DST = distortion, OVD = overdrive)
    DRIVE0-100 Distortion drive
    MASTER0-100 Master volume
    BASS0-100 Bass tone control
    MIDDLE0-100 Middle tone control
    TREBLE0-100 High tone control
    N. GATE0-20 Noise reduction
    CAB DEP0-100% Speaker cabinet simulation depth
    EQ F100 Hz-8.00 kHz EQ (peaking type) frequency
    EQ G-12.0 to +12.0 dB EQ (peaking type) gain
    EQ Q10.0-0.10 EQ (peaking type) bandwidthParameter
    Range
    Description
    INPUT 1-180 to 0 dB Adjusts the CH1 input level
    OUTPUT 1-180 to 0 dB Adjusts the CH1 output gain
    RATIO 12:1, 4:1, 8:1, 12:1, 20:1 Ratio for CH1 compressor
    ATTA CK  10.022-50.4 ms Attack time of CH1 compressor
    RELEASE110.88-544.22 ms Release time of CH1 compressor
    MAKE UP1OFF, ONAutomatically corrects output gain reduction when CH1 compressor is 
    applied
    SIDEHPF1OFF, ONWhen the HPF in the side chain of the CH1 compressor is turned on, the 
    compression applied to the low range will be weakened, thus emphasizing 
    the low range.
    INPUT 2-180 to 0 dB Adjusts the CH2 input level
    OUTPUT 2-180 to 0 dB Adjusts the CH2 output gain
    RATIO 22:1, 4:1, 8:1, 12:1, 20:1 Ratio of CH2 compressor
    ATTA CK  20.022-50.4 ms Attack time of CH2 compressor
    RELEASE210.88-544.22 ms Release time of CH2 compressor
    MAKE UP2OFF, ONAutomatically corrects output gain reduction when the CH2 compressor is 
    applied
    SIDEHPF2OFF, ONWhen the HPF in the side chain of the CH2 compressor is turned on, the 
    compression applied to the low range will be weakened, thus emphasizing 
    the low range.
    Parameter
    Range
    Description
    INPUT-180 to 0 dB Adjusts the input level
    OUTPUT-180 to 0 dB Adjusts the output gain
    RATIO1:2, 4:1, 8:1, 12:1, 20:1 Ratio of the compressor
    AT TA C K0.022-50.4 ms Attack time of the compressor
    RELEASE10.88-544.22 ms Release time of the compressor
    MAKE UPOFF, ONAutomatically corrects output gain reduction when the compressor is 
    applied
    SIDE HPFOFF, ONWhen the HPF in the side chain of the compressor is turned on, the 
    compression applied to the low range will be weakened, thus emphasizing 
    the low range.
    Parameter
    Range
    Description
    THRE.1-60 to 0.0 dB Threshold of CH compressor
    KNEE1SOFT, MEDIUM, HARD Knee of CH1 compressor
    AT TA C K 10.01-80.0 ms Attack time of CH1 compressor
    RELEASE16.2-999 ms Release time of CH1 compressor
    RATIO11.0-500, ∞ Ratio for CH1 compressor
    OUTPUT1-20 to 40 dB Adjusts the CH1 output gain
    THRE.2-60 to 0.0 dB Threshold of CH2 compressor
    KNEE2SOFT, MEDIUM, HARD Knee of CH2 compressor
    AT TA C K 20.01-80.0 ms Attack time of CH2 compressor
    RELEASE26.2-999 ms Release time of CH2 compressor
    RATIO21.0-500, ∞ Ratio of CH2 compressor
    OUTPUT2-20 to 40 dB Adjusts the CH2 output gain
    ST LINKOFF, ONLinks CH1 and CH2 as a stereo pair. THRE., KNEE, ATTACK, RELEASE, and 
    RATIO parameters are linked; OUTPUT parameter is not linked
    Parameter
    Range
    Description
    THRE.-60 to 0.0 dB Threshold of the compressor
    KNEESOFT, MEDIUM, HARD Knee of the compressor
    AT TA C K0.01-80.0 ms Attack time of the compressor
    RELEASE6.2-999 ms Release time of the compressor
    RATIO1.0-500, ∞ Ratio of the compressor
    OUTPUT-20 to 40 dB Adjusts the output gain 
    						
    							 Data List
    19
    EQUALIZER601This effect emulates the characteristics of 70's analog equalizers. Re-creating the distortion 
    of typical analog circuits will add drive to the sound.
    OPENDECKIt emulates the tape compression created by two open reel tape recorders (a recording deck 
    and a playback deck). You can change the sound quality by adjusting various elements, such 
    as the deck type, tape quality, playback speed, etc.M.BAND DYNA.Two input, two output 3-band dynamically controlled processor, with individual solo and gain 
    reduction metering for each band.
    Parameter
    Range
    Description
    LO TYPEHPF-2/1, LSH-1/2 Type of EQ1
    LO F16.0 Hz to 20.0 kHz Cut-off frequency of EQ1
    LO G-18.0 to +18.0 dB Gain of EQ1
    MID1 Q0.50-16.0 Q of EQ2
    MID1 F16.0 Hz to 20.0 kHz Center frequency of EQ2
    MID1 G-18.0 to +18.0 dB Gain of EQ2
    MID2 Q0.50-16.0 Q of EQ3
    MID2 F16.0 Hz to 20.0 kHz Center frequency of EQ3
    MID2 G-18.0 to +18.0 dB Gain of EQ3
    INPUT-18.0 to +18.0 dB Input gain
    OUTPUT-18.0 to +18.0 dB Output gain
    MID3 Q0.50-16.0 Q of EQ4
    MID3 F16.0 Hz to 20.0 kHz Center frequency of EQ4
    MID3 G-18.0 to +18.0 dB Gain of EQ4
    MID4 Q0.50-16.0 Q of EQ5
    MID4 F16.0 Hz to 20.0 kHz Center frequency of EQ5
    MID4 G-18.0 to +18.0 dB Gain of EQ5
    HI TYPELPF-2/1, HSH-1/2 Type of EQ6
    HI F
    16.0 Hz to 20.0 kHz 
    *1
    *1. 16.0 Hz to 20.0 kHz (LPF-1, LPF-2), 1.0 kHz to 20.0 kHz (HSH-1, HSH-2)Cut-off frequency of EQ6
    HI G-18.0 to +18.0 dB Gain of EQ6
    LO SWOFF, ON Switches EQ1 on/off
    MID1 SWOFF, ON Switches EQ2 on/off
    MID2 SWOFF, ON Switches EQ3 on/off
    MID3 SWOFF, ON Switches EQ4 on/off
    MID4 SWOFF, ON Switches EQ5 on/off
    HI SWOFF, ON Switches EQ6 on/off
    TYPECLEAN, DRIVESelects the equalizer type.
    The CLEAN equalizer provides non-distorted, clear, typical digital sound, 
    emulating variations in frequency response in the analog circuits. The 
    DRIVE equalizer provides distorted, driven sound that enhances analog 
    flavor, emulating changes in frequency response in the analog circuits.
    Parameter
    Range
    Description
    REC DECSwss70, Swss78, Swss85, 
    Amer70Selects the recording deck type
    REC LVL-96.0 to +18.0 dBAdjusts the input level of the recording deck. As you raise the level, tape 
    compression is generated, which narrows the dynamic range and distorts 
    the sound.
    REC HI-6.0 to +6.0 dB Adjusts the high range gain of the recording deck
    REC BIAS-1.00 to +1.00 Adjusts the bias of the recording deck
    REPR DECSwss70, Swss78, Swss85, 
    Amer70Selects the playback deck type
    REPR LVL-96.0 to +18.0 dB Adjusts the output level of the playback deck
    REPR HI-6.0 to +6.0 dB Adjusts the high range gain of the playback deck
    REPR LO-6.0 to +6.0 dB Adjusts the low range gain of the playback deck
    MAKE UPOff, OnWhen you adjust the REC LVL, the REPR LVL reflects the change, 
    maintaining the relative output level. You can change the amount of 
    distortion without changing the output level.
    TP SPEED15ips, 30ips Selects the tape speed
    TP KINDOld, New Selects the tape type
    Parameter
    Range
    Description
    L-M XOVER21.2 Hz-8.00 kHz Crossover frequency between the low and mid bands
    M-H XOVER21.2 Hz-8.00 kHz Crossover frequency between the mid and high bands
    SLOPE-6 dB, -12 dB Filter slope
    LOW GAIN-12.0 dB to +12.0 dB Low band gain
    MID GAIN-12.0 dB to +12.0 dB Mid band gain
    HI. GAIN-12.0 dB to +12.0 dB High band gain
    TOTAL-72.0 dB to +12.0 dB Overall gain
    CEILING-6.0 dB to 0.0 dB, OFF Restricts the output so that it will not exceed the specified level
    CMP.THRE-24.0 dB to 0.0 dB Threshold of the compressor
    CMP.RAT1:1 to 20:1 Ratio of the compressor
    CMP.ATK0-120 ms Attack time of the compressor
    CMP.REL
    *1
    Release time of the compressor
    CMP.KNEE0-5 Knee of the compressor
    CMP.BYPOFF/ON Bypasses the compressor
    EXP.THRE-54.0 dB to -24.0 dB Threshold of the expander
    EXP.RAT1:1 to 5:1 Ratio of the expander
    EXP.REL
    *1
    Release time of the expander
    EXP.BYPOFF/ON Bypasses the expander
    LIM.THRE-12.0 dB to 0.0 dB Threshold of the limiter 
    						
    							 Data List
    20
    M.BAND COMPTwo input, two output 3-band compressor, with individual solo and gain reduction metering for 
    each band.
    Premium Rack Processor ParametersPortico5033This models an analog 5-band EQ made by the RND company.Portico5043This models an analog compressor/limiter made by the RND company.
    LIM.ATK0-120 ms Attack time of the limiter
    LIM.REL
    *1
    Release time of the limiter
    LIM.KNEE0-5 Knee of the limiter
    LIM.BYPOFF/ON Bypasses the limiter
    PRESENCE-10 to +10Positive (+) values lower the threshold of the high band and raise the 
    threshold of the low band. Negative (-) values do the opposite. If this is 
    set to 0, the high, mid, and low bands will be affected in the same way.
    LOOKUP0.0-100.0 ms Lookup delay
    MAKE UPOFF/ON Automatically adjusts the output level
    *1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)
    Parameter
    Range
    Description
    L-M XOVER21.2 Hz-8.00 kHz Crossover frequency between the low and mid bands
    M-H XOVER21.2 Hz-8.00 kHz Crossover frequency between the mid and high bands
    SLOPE-6 dB, -12 dB Filter slope
    LOW GAIN-12.0 dB to +12.0 dB Low band gain
    MID GAIN-12.0 dB to +12.0 dB Mid band gain
    HI. GAIN-12.0 dB to +12.0 dB High band gain
    TOTAL-72.0 dB to +12.0 dB Overall gain
    CEILING-6.0 dB to 0.0 dB, OFF Restricts the output so that it will not exceed the specified level
    LOW THRE-54.0 dB to 0.0 dB Threshold of the low band compressor
    LOW RAT1:1 to 20:1 Ratio of the low band compressor
    LOW ATK0-120 ms Attack time of the low band compressor
    LOW REL
    *1
    *1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)Release time of the low band compressor
    LOW KNEE0-5 Knee of the low band compressor
    LOW BYPOFF/ON Bypasses the low band compressor
    MID THRE-54.0 dB to 0.0 dB Threshold of the mid band compressor
    MID RAT1:1 to 20:1 Ratio of the mid band compressor
    MID ATK0-120 ms Attack time of the mid band compressor
    MID REL
    *1
    Release time of the mid band compressor
    MID KNEE0-5 Knee of the mid band compressor
    MID BYPOFF/ON Bypasses the mid band compressor
    HI. THRE-54.0 dB to 0.0 dB Threshold of the high band compressor
    HI. RAT1:1 to 20:1 Ratio of the high band compressor
    HI. ATK0-120 ms Attack time of the high band compressor
    HI. RAT
    *1
    Release time of the high band compressor
    HI. KNEE0-5 Knee of the high band compressor
    HI. BYPOFF/ON Bypasses the high band compressor
    LOOKUP0.0-100.0 ms Lookup delay
    MAKE UPOFF/ON Automatically adjusts the output level
    Parameter
    Range
    Description
    Parameter
    Range
    Description
    ALL BYPASSOFF, ONTurns bypass on/off for the EQ. Even in the bypassed state, the signal will 
    pass through the input/output transformers and the amp circuit.
    TRIM-12.0 to 12.0 dB Input gain
    LF FREQ30.00 to 300.0 Hz Center frequency of the LF band
    LF GAIN-12.0 to 12.0 dB Gain of the LF band
    LMF INOFF, ON Switches the LMF band on/off
    LMF Q0.70 to 5.00 Q of the LMF band
    LMF FREQ50.00 to 400.0 Hz Center frequency of the LMF band
    LMF GAIN-12.0 to 12.0 dB Gain of the LMF band
    MF INOFF, ON Switches the MF band on/off
    MF Q0.70 to 5.00 Q of the MF band
    MF FREQ330.0 to 2500 Hz Center frequency of the MF band
    MF GAIN-12.0 to 12.0 dB Gain of the MF band
    HMF INOFF, ON Switches the HMF band on/off
    HMF Q0.70 to 5.00 Q of the HMF band
    HMF FREQ1.80k to 16.0k Hz Center frequency of the HMF band
    HMF GAIN-12.0 to 12.0 dB Gain of the HMF band
    LF/HF INOFF, ON Switches the LF/HF bands on/off
    HF FREQ2.50k to 25.0k Hz Center frequency of the HF band
    HF GAIN-12.0 to 12.0 dB Gain of the HF band
    Parameter
    Range
    Description
    IN OFF, ONTurns bypass on/off for the compressor. When bypassed, the button will 
    be unlit. However even in the bypassed state, the signal will pass through 
    the input/output transformers and the amp circuit.
    FB OFF, ON Switches between feed-forward type and feed-back type
    THRESHOLD-50.0 to 0.0 dB Threshold level
    RATIO1.10 : 1 to 28.9 : 1, LIMIT Compression ratio
    AT TA C K20 to 75 ms Attack time
    RELEASE100 ms to 2.50 sec Release time
    GAIN-6.0 to 20.0 dB Output level 
    						
    							 Data List
    21
    U76This models a well-known vintage compressor/limiter used in a wide range of situations.Opt-2AThis processor emulates a well-known vintage model of vacuum tube opto compressor.EQ-1AThis processor emulates a vintage EQ that's considered a classic example of a passive EQ.
    Dynamic EQThis is a newly developed equalizer that dynamically changes the EQ gain in response to the 
    input signal, controlling the amount of EQ cut or boost in a way similar to a compressor or 
    expander.Buss Comp 369
    Parameter
    Range
    Description
    INPUT-96.0 to 0.0 dB Input level
    OUTPUT-96.0 to 0.0 dB Output level
    ATTA CK5.50 to 0.10 msAttack time of the compressor. Turning this all the way to the right 
    produces the fastest attack.
    RELEASE1100.0 to 56.4 msRelease time of the compressor. Turning this all the way to the right 
    produces the fastest release.
    RATIOALL, 4, 8, 12, 20Switches the compression ratio. Pressing ALL produces the strongest 
    effect.
    METEROFF, +4, +8, GR Switches the meter display
    Parameter
    Range
    Description
    GAIN-56.0 dB to 40.0 dB Output level
    PEAK REDUCTION-48.0 dB to 48.0 dB Amount of gain reduction
    RATIO2.00 to 10.00 Compression ratio
    METER SELECTOUTPUT+10, 
    GAIN REDUCTION, 
    OUTPUT+4Switches the meter display
    Parameter
    Range
    Description
    LOW FREQUENCY20, 30, 60, 100 Hz Frequency range of the low range filter
    (LOW) BOOST0.0 to 10.0 Boost amount of the low range filter
    (LOW) ATTEN0.0 to 10.0 Attenuation amount of the low range filter
    HIGH FREQUENCY3k, 4k, 5k, 8k, 10k, 12k, 16k Hz Frequency range of the high range filter
    (HIGH) BOOST0.0 to 10.0 Boost amount of the high range filter
    (HIGH) BAND WIDTH0.0 to 10.0 Band width of the high range filter
    (HIGH) ATTEN SEL5k, 10k, 20k Hz Frequency range attenuated by the high range filter
    (HIGH) ATTEN0.0 to 10.0 Attenuation amount of the high range filter
    INOFF, ONTurns the processor on/off. If this is off, the filter section 
    will be bypassed, but the signal will pass through the 
    input/output transformers and the amp circuit.
    Parameter
    Range
    Description
    BAND ON/OFF OFF, ON Turns the corresponding band on/off
    SIDECHAIN CUE OFF, ONIf this is on, the sidechain signal that controls the dynamics will 
    be sent to the CUE bus for monitoring.
    SIDECHAIN LISTENOFF, ONIf this is on, the sidechain signal that is linked to the dynamics 
    will be output to the bus (such as the STEREO bus or a MIX/
    MATRIX bus) to which the inserted channel is being sent.
    FILTER TYPE Low Shelf, Bell, Hi Shelf Switches the type of equalizer and sidechain filter
    FREQUENCY 20.0 to 20.0k Hz Frequency controlled by the equalizer and sidechain filter
    Q 15.0 to 0.50 Q of the equalizer and sidechain filter
    THRESHOLD -80.0 to 10.0 dB Threshold value at which processing begins to apply
    RATIO ∞ : 1 to 1 : 1.50 Sets the boost/cut ratio relative to the input signal
    MODEBELOW, ABOVESpecifies whether the processor will operate when the 
    sidechain signal exceeds the threshold setting (ABOVE) or 
    when it falls below the threshold setting (BELOW)
    AT TA C K / R E L E A S E  FAST, SLOW, AUTO Attack time/release time for when compression or boost is 
    applied
    Parameter
    Range
    Description
    INPUT ADJUST-15.0 to +15.0dBInput gain. However, the output gain is also linked so that there 
    is no change in the pass-through volume. For example, if 
    INPUT ADJUST is +5dB, the input gain is +5dB and the output 
    gain is -5dB.
    LINKON, OFF Stereo link function (STEREO only)
    METERIN, GR, OUT Meter switch (STEREO only)
    VUIN, OUT Meter switch (DUAL only)
    COMP INON, OFF Compressor on/off
    COMP RATIO1.5:1, 2:1, 3:1, 4:1, 6:1 Ratio of the compressor
    COMP GAIN0.0 to +20.0dB Compressor gain
    COMP RECOVERY100ms, 400ms, 800ms, 
    1500ms, a1, a2Compressor release. The release times for a1 (auto 1) and a2 
    (auto 2) change automatically. a1: Changes automatically 
    between 100 ms and 2 sec. a2: Changes automatically 
    between 50 ms and 5 sec.
    COMP THRESHOLD-40 to -5dBFS Threshold of the compressor
    LIMIT INON, OFF Limiter on/off
    LIMIT ATTACKFAST, SLOW Attack time of the limiter FAST: 2 ms, SLOW: 4 ms
    LIMIT RECOVERY50ms, 100ms, 200ms, 
    800ms, a1, a2Limiter release. The release times for a1 (auto 1) and a2 (auto 
    2) change automatically. a1: Changes automatically between 
    100 ms and 2 sec. a2: Changes automatically between 50 ms 
    and 5 sec.
    LIMIT THRESHOLD-16 to -5 dBFS Threshold of the limiter 
    						
    							 Data List
    22
    Automixer Parameters
    Parameters That Can Be Assigned to Control Changes
    Parameter
    Range
    Description
    Groupa, b, c Channel control field group
    OverrideOFF, ON Turns on/off overriding of the channel control field
    ChModeman, auto, mute Channel control field mode (man/auto/mute)
    ChModePresetman, auto, mute Preset setting of the channel control field
    Weight-100 to 15Relative sensitivity among input channels in the channel 
    control field
    MeterTypegain, input, output Meter type of the master field
    MasterOverrideOFF, ON Turns on/off overriding of the master field
    MasterMuteOFF, ON Turns on/off the mute setting of the master field
    Gain0 to 127Automixer gain displayed for each channel when the meter 
    button of the master field is set to “gain”
    InputLevel0 to 127Input level displayed for each channel when the meter button 
    of the master field is set to “input”
    OutputLevel0 to 127Output level displayed for each channel when the meter 
    button of the master field is set to “output”
    PostWeightingFilter0 to 127 Level indicator of the channel control field
    Mode
    Parameter 1
    Parameter 2
    NO ASSIGN — —
    BALANCE OUTPUTMIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-STEREO R
    CH ONINPUTCH 1-CH 72
    *1
    STIN1L-STIN8R
    OUTPUTMIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-MONO(C)
    CUEOUTPUT —
    CUE MODE —
    SURROUND CUE MODE —
    FADER CUE RELEASE ON —
    INPUT CUE POINT —
    DCA CUE POINT —
    OUTPUT CUE POINT —
    DCA UNITY —
    OUTPUT LEVEL H —
    OUTPUT LEVEL L —
    ACTIVE CUE —
    CLEAR CUE —
    SPECIFIC CHCH 1-CH 72
    *1
    STIN1L-STIN8R
    MIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-MONO(C)
    DCA 1-DCA16
    DCAON
    DCA 1-DCA 16 FADER H
    FADER L
    DIRECT OUT ON
    CH 1-CH 72
    *1
    EFFECTBYPASS
    RACK1-8 MIX BALANCE
    PARAM 1 H - PARAM 32 L
    FADER HINPUTCH 1-CH 72
    *1
    STIN1L-STIN8R
    OUTPUTMIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-MONO(C)
    FADER LINPUTCH 1-CH 72
    *1
    STIN1L-STIN8R
    OUTPUTMIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-MONO(C)
    GEQON A
    GEQ RACK1-GEQ RACK16
    EFFECT RACK1- EFFECT 
    RACK8 ON B
    GAIN 1A-GAIN 31A
    GAIN 1B-GAIN 31B 
    						
    							 Data List
    23
    INPUT ATT INPUTCH 1-CH 72
    *1
    STIN1L-STIN8R
    INPUT DYNAMICS1ON
    CH 1-CH 72
    *1
    STIN1L-STIN8R ATTAC K
    THRESHOLD
    RANGE
    HOLD H
    HOLD L
    DECAY/RELEASE H
    DECAY/RELEASE L
    RATIO
    KNEE
    GAIN H
    GAIN L
    INPUT DYNAMICS2ON
    CH 1-CH 72
    *1
    STIN1L-STIN8R ATTAC K
    THRESHOLD
    RELEASE H
    RELEASE L
    RATIO/TYPE
    GAIN H
    GAIN L/Q
    KNEE/WIDTH
    FILTER FREQ
    INPUT EQON
    CH 1-CH 72
    *1
    STIN1L-STIN8R LOW Q
    LOW FREQ
    LOW GAIN
    LOW MID Q
    LOW MID FREQ
    LOW MID GAIN
    HIGH MID Q
    HIGH MID FREQ
    HIGH MID GAIN
    HIGH Q
    HIGH FREQ
    HIGH GAIN
    LPF ON
    LOW TYPE
    HIGH TYPE
    INPUT HPFON
    CH 1-CH 72
    *1
    STIN1L-STIN8R 
    FREQ
    INSERTINPUT
    CH 1-CH 72
    *1
    OUTPUTMIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-MONO(C)
    Mode
    Parameter 1
    Parameter 2
    LCRON 
    CH 1-CH 72
    *1
    STIN1L-STIN8R
    MIX 1-MIX 24 CSR
    MIX/MATRIX SENDMIX 1 ON - MIX24 ON
    CH 1-CH 72
    *1
    STIN1L-STIN8R MATRIX 1 ON - MATRIX 8 ON
    MIX 1 POINT - MIX 24 POINT
    MATRIX 1 POINT - MATRIX 8 POINT
    MIX 1 H - MIX24H
    MATRIX1 H - MATRIX8 H
    MIX 1 L - MIX24L
    MATRIX1 L - MATRIX8 L
    MIX 1/2 PAN - MIX 23/24 PAN
    MATRIX1/2 PAN - MATRIX7/8 PAN
    MIX TO MATRIXMATRIX 1 POINT - MATRIX 8 POINT
    MIX 1-MIX 24 MATRIX 1 ON - MATRIX 8 ON
    MATRIX 1 LEVEL H - MATRIX 8 LEVEL H
    MATRIX 1 LEVEL L - MATRIX 8 LEVEL L
    MATRIX 1/2 PAN - MATRIX 7/8 PAN
    MIX TO STEREOTO STEREO ON
    MIX 1-MIX 24 TO MONO ON
    PA N
    MONITOROUTPUT
    —
    SOURCE SELECT
    DEFINE ASSIGNMIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-MONO(C)
    OMNI 1-2-OMNI 7-8
    PB OUT
    DIMMER ON
    — PHONES LEVEL LINK
    CUE INTERRUPTION
    MONO MONITOR
    MONITOR FADER H
    MONITOR FADER L
    DELAY AUTO BYPASS
    DELAY ON
    MUTE MASTER ON MASTER 1-MASTER 8
    OUTPUT ATT OUTPUTMIX1-MIX24
    MATRIX1-MATRIX8
    STEREO L-MONO(C)
    OUTPUT DYNAMICS1ON
    MIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-MONO(C) AT TA C K
    THRESHOLD
    RELEASE H
    RELEASE L
    RATIO
    GAIN H
    GAIN L
    KNEE/WIDTH
    Mode
    Parameter 1
    Parameter 2 
    						
    							 Data List
    24
    OUTPUT EQON
    MIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-MONO(C) LOW Q
    LOW FREQ
    LOW GAIN
    LOW MID Q
    LOW MID FREQ
    LOW MID GAIN
    HIGH MID Q
    HIGH MID FREQ
    HIGH MID GAIN
    HIGH Q
    HIGH FREQ
    HIGH GAIN
    LOW TYPE
    HIGH TYPE
    LOW HPF ON
    HIGH LPF ON
    PAN/BALANCE INPUTCH 1-CH 72
    *1
    STIN1L-STIN8R
    PEQA/B LINK
    GEQ RACK 1A-16B
    EFFECT RACK 1A-8B ON
    BAND1 BYPASS
    BAND1 GAIN H
    BAND1 GAIN L
    BAND1 FREQ
    BAND1 Q
    BAND2 BYPASS
    BAND2 GAIN H
    BAND2 GAIN L
    BAND2 FREQ
    BAND2 Q
    BAND3 BYPASS
    BAND3 GAIN H
    BAND3 GAIN L
    BAND3 FREQ
    BAND3 Q
    BAND4 BYPASS
    BAND4 GAIN H
    Mode
    Parameter 1
    Parameter 2
    PEQBAND4 GAIN L
    GEQ RACK 1A-16B
    EFFECT RACK 1A-8B BAND4 FREQ
    BAND4 Q
    BAND5 BYPASS
    BAND5 GAIN H
    BAND5 GAIN L
    BAND5 FREQ
    BAND5 Q
    BAND6 BYPASS
    BAND6 GAIN H
    BAND6 GAIN L
    BAND6 FREQ
    BAND6 Q
    BAND7 BYPASS
    BAND7 GAIN H
    BAND7 GAIN L
    BAND7 FREQ
    BAND7 Q
    BAND8 BYPASS
    BAND8 GAIN H
    BAND8 GAIN L
    BAND8 FREQ
    BAND8 Q
    HPF ON
    HPF FREQ
    HPF SLOPE
    LPF ON
    LPF FREQ
    LPF SLOPE
    NOTCH A ON
    NOTCH A FREQ H
    NOTCH A FREQ L
    NOTCH A Q
    NOTCH B ON
    NOTCH B FREQ H
    NOTCH B FREQ L
    NOTCH B Q
    NOTCH C ON
    NOTCH C FREQ H
    NOTCH C FREQ L
    NOTCH C Q
    PHASE INPUTCH 1-CH 72
    *1
    STIN1L-STIN8R
    PREMIUM EFFECT ABYPASS
    RACK1-8
    PARAM 1 H - PARAM 64 L
    PREMIUM EFFECT BBYPASS
    RACK1-8
    PARAM 1 H - PARAM 64 L
    Mode
    Parameter 1
    Parameter 2 
    						
    							 Data List
    25
    RECALL SAFE ONCH 1-CH 72
    *1
    STIN1L-STIN8R
    MIX 1-MIX 24
    MATRIX 1-MATRIX 8
    STEREO L-MONO(C)
    GEQ RACK 1A-16B
    EFFECT RACK 1A-8B
    PREMIUM RACK 1A-8B
    DCA 1-DCA16
    STEREO TO MATRIXMATRIX 1 POINT - MATRIX 8 POINT
    STEREO L-MONO(C) MATRIX 1 ON - MATRIX 8 ON
    MATRIX 1 LEVEL H - MATRIX 8 LEVEL H
    MATRIX 1 LEVEL L - MATRIX 8 LEVEL L
    MATRIX 1/2 PAN - MATRIX 7/8 PAN
    SURROUND MONITORSOURCE SELECT
    — 2CH MONITOR ASSIGN
    DOWNMIX
    SURROUND SPEAKER SOLO
    SURROUND SPEAKER L
    SURROUND SPEAKER R
    SURROUND SPEAKER C
    SURROUND SPEAKER LFE
    SURROUND SPEAKER Ls
    SURROUND SPEAKER Rs
    SURROUND PANLR PAN
    SELECTED CH
    CH 1-CH 72
    *1
    STIN1L-STIN8R FR PAN
    FR PAN REVERSE
    DIV
    L ON
    R ON
    C ON
    LFE ON
    Ls ON
    Rs ON
    LFE LEVEL H
    LFE LEVEL L
    TO MONO ONCH 1-CH 72
    *1
    STIN1L-STIN8R
    TO STEREO ONCH 1-CH 72
    *1
    STIN1L-STIN8R
    *1. CL3:  CH1-CH64, CL1:  CH1-CH48
    Mode
    Parameter 1
    Parameter 2 
    						
    							 Data List
    26 NRPN Parameter Assignments
    Parameter
    From (HEX)
    To  ( H E X )
    FADERINPUT 0000 0057
    MIX1-20, MATRIX, 
    STEREO LR0060 007D
    INPUT to MIX9-16 LEVELMIX9 SEND 007E 00D5
    MIX10 SEND 00DE 0135
    MIX11 SEND 013E 0195
    MIX12 SEND 019E 01F5
    MIX13 SEND 01FE 0255
    MIX14 SEND 025E 02B5
    MIX15 SEND 02BE 0315
    MIX16 SEND 031E 0375
    INPUT to MATRIX1 - 4 
    LEVELMATRIX1 SEND 037E 03D5
    MATRIX2 SEND 03DE 0435
    MATRIX3 SEND 043E 0495
    MATRIX4 SEND 049E 04F5
    MIX1-20, STEREO LR to 
    MATRIX LEVELMATRIX1 SEND 04FE 0513
    MATRIX2 SEND 0514 0529
    MATRIX3 SEND 052A 053F
    MATRIX4 SEND 0540 0555
    MATRIX5 SEND 0556 056B
    MATRIX6 SEND 056C 0581
    MATRIX7 SEND 0582 0597
    MATRIX8 SEND 0598 05AD
    ONINPUT 05B6 060D
    MIX1-20, MATRIX, 
    STEREO LR0616 0633
    INPUT to MIX9-16 ONMIX9 SEND 0634 068B
    MIX10 SEND 0694 06EB
    MIX11 SEND 06F4 074B
    MIX12 SEND 0754 07AB
    MIX13 SEND 07B4 080B
    MIX14 SEND 0814 086B
    MIX15 SEND 0874 08CB
    MIX16 SEND 08D4 092B
    INPUT to MATRIX1-4 ONMATRIX1 SEND 0934 098B
    MATRIX2 SEND 0994 09EB
    MATRIX3 SEND 09F4 0A4B
    MATRIX4 SEND 0A54 0AAB
    MIX1-20, STEREO LR to 
    MATRIX ONMATRIX1 SEND 0AB4 0AC9
    MATRIX2 SEND 0ACA 0ADF
    MATRIX3 SEND 0AE0 0AF5
    MATRIX4 SEND 0AF6 0B0B
    MATRIX5 SEND 0B0C 0B21
    MATRIX6 SEND 0B22 0B37
    MATRIX7 SEND 0B38 0B4D
    MATRIX8 SEND 0B4E 0B63
    MIX1-8 to STEREO ON MIX TO ST 0B64 0B6B
    PHASE INPUT 0B6C 0BC3
    INSERT ONINPUT 0BCC 0C13
    MIX1-20, MATRIX, 
    STEREO LR0C2C 0C49
    INPUT to MIX9-16 PRE/
    POSTMIX9 SEND 0C4A 0CA1
    MIX10 SEND 0CAA 0D01
    MIX11 SEND 0D0A 0D61
    MIX12 SEND 0D6A 0DC1
    MIX13 SEND 0DCA 0E21
    MIX14 SEND 0E2A 0E81
    MIX15 SEND 0E8A 0EE1
    MIX16 SEND 0EEA 0F41
    INPUT to MATRIX1-4 
    PRE/POSTMATRIX1 SEND 0F4A 0FA1
    MATRIX2 SEND 0FAA 1001
    MATRIX3 SEND 100A 1061
    MATRIX4 SEND 106A 10C1
    INPUT57-64 to MIX1-8 
    LEVELMIX1 SEND 10CA 10D1
    MIX2 SEND 10D2 10D9
    MIX3 SEND 10DA 10E1
    MIX4 SEND 10E2 10E9
    MIX5 SEND 10EA 10F1
    MIX6 SEND 10F2 10F9
    MIX7 SEND 10FA 1101
    MIX8 SEND 1102 1109
    INPUT57-64 to 
    MATRIX5-8 LEVELMATRIX5 SEND 110A 1111
    MATRIX6 SEND 1112 1119
    MATRIX7 SEND 111A 1121
    MATRIX8 SEND 1122 1129
    INPUT57-64 to MIX1-8 
    ONMIX1 SEND 112A 1131
    MIX2 SEND 1132 1139
    MIX3 SEND 113A 1141
    MIX4 SEND 1142 1149
    MIX5 SEND 114A 1151
    MIX6 SEND 1152 1159
    MIX7 SEND 115A 1161
    MIX8 SEND 1162 1169
    INPUT57-64 to 
    MATRIX5-8 ONMATRIX5 SEND 116A 1171
    MATRIX6 SEND 1172 1179
    MATRIX7 SEND 117A 1181
    MATRIX8 SEND 1182 1189
    INPUT57-64 to MIX1-8 
    PRE/POSTMIX1 SEND 118A 1191
    MIX2 SEND 1192 1199
    MIX3 SEND 119A 11A1
    MIX4 SEND 11A2 11A9
    MIX5 SEND 11AA 11B1
    MIX6 SEND 11B2 11B9
    MIX7 SEND 11BA 11C1
    MIX8 SEND 11C2 11C9
    INPUT57-64 to 
    MATRIX5-8 PRE/POSTMATRIX5 SEND 11CA 11D1
    MATRIX6 SEND 11D2 11D9
    MATRIX7 SEND 11DA 11E1
    MATRIX8 SEND 11E2 11E9
    Parameter
    From (HEX)
    To  ( H E X )
    INPUT57-64 EQLOW TYPE 11EA 11F1
    HIGH TYPE 11F2 11F9
    INPUT57-64 HPF FREQ 11FA 1201
    INPUT57-64 to MIX1/2-
    7/8 PANMIX1/2 1202 1209
    MIX3/4 120A 1211
    MIX5/6 1212 1219
    MIX7/8 121A 1221
    INPUT57-64 to 
    MATRIX5/6, 7/8 PANMATRIX5/6 1222 1229
    MATRIX7/8 122A 1231
    INPUT57-64 to STEREO ON 1232 1239
    INPUT57-64 RECALL 
    SAFEON 123A 1241
    INPUT57-64 to MONO ON 1242 1249
    INPUT49-64 
    DYNAMICS1RATIO 124A 1259
    KNEE/WIDTH 125A 1269
    GAIN 126A 1279
    INPUT49-64 
    DYNAMICS2reserved 127A 1289
    FILTER FREQ 128A 1299
    INPUT65-72, STIN5-8 
    RECALL SAFEON 129A 12A9
    EQ INPUT, MIX1-20, 
    MATRIX, STEREO LRON 1304 1381
    LOW Q 1382 13FF
    LOW FREQ 1400 147D
    LOW GAIN 147E 14FB
    LOW MID Q 14FC 1579
    LOW MID FREQ 157A 15F7
    LOW MID GAIN 15F8 1675
    HIGH MID Q 1676 16F3
    HIGH MID FREQ  16F4 1771
    HIGH MID GAIN 1772 17EF
    HIGH Q 17F0 186D
    HIGH FREQ 186E 18EB
    HIGH GAIN 18EC 1969
    ATT 196A 19C1
    HPF ON 19E8 1A65
    LPF ON 1A66 1AE3
    INPUT DYNAMICS1ON 1AE4 1B3B
    ATTACK 1B44 1B9B
    THRESHOLD 1BA4 1BFB
    RANGE 1C04 1C5B
    HOLD 1C64 1CBB
    DECAY/RELEASE 1CC4 1D1B
    INPUT DYNAMICS2 ON 1D24 1DA1
    MIX1-20, MATRIX, 
    STEREO LR DYNAMICS1ATTACK 1DA2 1E1F
    THRESHOLD 1E20 1E9D
    RELEASE 1E9E 1F1B
    RATIO 1F1C 1F99
    GAIN 1F9A 2017
    KNEE/WIDTH 2018 2095
    PAN/BALANCE INPUT 2096 20ED
    Parameter
    From (HEX)
    To  ( H E X ) 
    						
    							 Data List
    27
    INPUT to MIX9/10-15/16 
    PA NMIX9/10 20F6 214D
    MIX11/12 2156 21AD
    MIX13/14 21B6 220D
    MIX15/16 2216 226D
    INPUT to MATRIX1/2, 
    3/4 PANMATRIX1/2 2276 22CD
    MATRIX3/4 22D6 232D
    MIX1-20, STEREO LR to 
    MATRIX PANMATRIX1/2 2336 234B
    MATRIX3/4 234C 2361
    MATRIX5/6 2362 2377
    MATRIX7/8 2378 238D
    MIX1-8 to STEREO PAN MIX TO ST 238E 2395
    BALANCEMIX1-20, MATRIX, 
    STEREO LR2396 23B3
    MIX, STEREO LR, MONO 
    to MATRIX PRE/POSTMATRIX1 SEND 23B4 23CE
    MATRIX2 SEND 23D0 23EA
    MATRIX3 SEND 23EC 2406
    MATRIX4 SEND 2408 2422
    MATRIX5 SEND 2424 243E
    MATRIX6 SEND 2440 245A
    MATRIX7 SEND 245C 2476
    MATRIX8 SEND 2478 2492
    MIX21-24, MONO to 
    MATRIX ONMATRIX1 SEND 2494 2498
    MATRIX2 SEND 249A 249E
    MATRIX3 SEND 24A0 24A4
    MATRIX4 SEND 24A6 24AA
    MATRIX5 SEND 24AC 24B0
    MATRIX6 SEND 24B2 24B6
    MATRIX7 SEND 24B8 24BC
    MATRIX8 SEND 24BE 24C2
    INPUT65-72, STIN5-8 to 
    MIX1-8 LEVELMIX1 SEND 24C4 24D3
    MIX2 SEND 24D4 24E3
    MIX3 SEND 24E4 24F3
    MIX4 SEND 24F4 2503
    MIX5 SEND 2504 2513
    MIX6 SEND 2514 2523
    MIX7 SEND 2524 2533
    MIX8 SEND 2534 2543
    INPUT65-72, STIN5-8 to 
    MIX1-8 ONMIX1 SEND 2544 2553
    MIX2 SEND 2554 2563
    MIX3 SEND 2564 2573
    MIX4 SEND 2574 2583
    MIX5 SEND 2584 2593
    MIX6 SEND 2594 25A3
    MIX7 SEND 25A4 25B3
    MIX8 SEND 25B4 25C3
    Parameter
    From (HEX)
    To  ( H E X )
    INPUT65-72, STIN5-8 to 
    MIX1-8 PRE/POSTMIX1 SEND 25C4 25D3
    MIX2 SEND 25D4 25E3
    MIX3 SEND 25E4 25F3
    MIX4 SEND 25F4 2603
    MIX5 SEND 2604 2613
    MIX6 SEND 2614 2623
    MIX7 SEND 2624 2633
    MIX8 SEND 2634 2643
    INPUT65-72, STIN5-8 to 
    MIX1/2-7/8 PANMIX1/2 2644 2653
    MIX3/4 2654 2663
    MIX5/6 2664 2673
    MIX7/8 2674 2683
    EFFECT RACK1-8BYPASS 26B4 26BB
    MIX BALANCE 26BC 26C3
    PARAM1 26C4 26CB
    PARAM2 26CC 26D3
    PARAM3 26D4 26DB
    PARAM4 26DC 26E3
    PARAM5 26E4 26EB
    PARAM6 26EC 26F3
    PARAM7 26F4 26FB
    PARAM8 26FC 2703
    PARAM9 2704 270B
    PARAM10 270C 2713
    PARAM11 2714 271B
    PARAM12 271C 2723
    PARAM13 2724 272B
    PARAM14 272C 2733
    PARAM15 2734 273B
    PARAM16 273C 2743
    PARAM17 2744 274B
    PARAM18 274C 2753
    PARAM19 2754 275B
    PARAM20 275C 2763
    PARAM21 2764 276B
    PARAM22 276C 2773
    PARAM23 2774 277B
    PARAM24 277C 2783
    PARAM25 2784 278B
    PARAM26 278C 2793
    PARAM27 2794 279B
    PARAM28 279C 27A3
    PARAM29 27A4 27AB
    PARAM30 27AC 27B3
    PARAM31 27B4 27BB
    PARAM32 27BC 27C3
    Parameter
    From (HEX)
    To  ( H E X )
    GEQ RACK1A-3BON 27C4 27C9
    GAIN1 27CA 27CF
    GAIN2 27D0 27D5
    GAIN3 27D6 27DB
    GAIN4 27DC 27E1
    GAIN5 27E2 27E7
    GAIN6 27E8 27ED
    GAIN7 27EE 27F3
    GAIN8 27F4 27F9
    GAIN9 27FA 27FF
    GAIN10 2800 2805
    GAIN11 2806 280B
    GAIN12 280C 2811
    GAIN13 2812 2817
    GAIN14 2818 281D
    GAIN15 281E 2823
    GAIN16 2824 2829
    GAIN17 282A 282F
    GAIN18 2830 2835
    GAIN19 2836 283B
    GAIN20 283C 2841
    GAIN21 2842 2847
    GAIN22 2848 284D
    GAIN23 284E 2853
    GAIN24 2854 2859
    GAIN25 285A 285F
    GAIN26 2860 2865
    GAIN27 2866 286B
    GAIN28 286C 2871
    GAIN29 2872 2877
    GAIN30 2878 287D
    GAIN31 287E 2883
    FADER MIX21-24, MONO 28E4 28E8
    INPUT1-56, STIN1-4 to 
    MIX1-8 LEVELMIX1 SEND 28EA 2929
    MIX2 SEND 292A 2969
    MIX3 SEND 296A 29A9
    MIX4 SEND 29AA 29E9
    MIX5 SEND 29EA 2A29
    MIX6 SEND 2A2A 2A69
    MIX7 SEND 2A6A 2AA9
    MIX8 SEND 2AAA 2AE9
    INPUT1-56, STIN1-4 to 
    MATRIX5-8 LEVELMATRIX5 SEND 2AEA 2B29
    MATRIX6 SEND 2B2A 2B69
    MATRIX7 SEND 2B6A 2BA9
    MATRIX8 SEND 2BAA 2BE9
    Parameter
    From (HEX)
    To  ( H E X ) 
    						
    All Yamaha manuals Comments (0)

    Related Manuals for Yamaha Cl 5 User Guide