Home > Yamaha > Music Mixer > Yamaha Cl 5 User Guide

Yamaha Cl 5 User Guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Yamaha Cl 5 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 255 Yamaha manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 302
    Add page 261 to Favourites
    image text
    Enable zoom 
    							 Data List
8Effects Parameters
REV-X HALL, REV-X ROOM, REV-X PLATENewly-developed two input, two output reverb algorithm. Delivers dense and rich 
reverberation, smooth decay, and provides a spaciousness and depth that enhances the 
original sound. Choose from three types depending on your location and needs: REV-X 
HALL, REV-X ROOM, and REV-X PLATE.REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATEOne input, two output hall, room, stage, and plate reverb simulations, all with gates.
Delay+RevDELAY+REV Delay and reverb in parallel
DelayRevDELAYREV Delay and reverb in series
DistDelayDISTDELAY Distortion and delay in series
Multi FilterMULTI FILTER 3-band parallel filter (24 dB/octave)
FreezeFREEZE Simple sampler
DistortionDISTORTION Distortion
Amp SimulateAMP SIMULATE  Guitar amp simulation
Comp276COMP276This compressor emulates the characteristics of an analog compressor that has 
become a sought-after classic in recording studios.
Comp276SCOMP276S This is a stereo model of COMP276.
Comp260COMP260This compressor emulates the characteristics of a compressor/limiter of the latter 
1970s that has become a sought-after classic for live SR.
Comp260SCOMP260S This is a stereo model of the COMP260.
Equalizer601EQUALIZER601This equalizer emulates the characteristics of an analog equalizer of the 1970s. It 
can be used to obtain a sense of drive.
OpenDeckOPENDECKThis is a tape saturation effect that emulates the tape compression produced by 
two open-reel tape recorders: a recording deck and a reproduction deck.
M.Band Dyna.M.BAND DYNA.  Multi-band dynamics processor
M.Band CompM.BAND COMP Multi-band compressor
Title
Type
Description
Parameter
Range
Description
REV TIME
0.28-27.94 s 
*1
*1. These values are for when the effect type is REV-X HALL and the ROOM SIZE=28. The range will differ depending 
on the effect type and ROOM SIZE setting.Reverb time
INI. DLY0.0-120.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0  High-frequency reverb time ratio
LO. RATIO0.1-1.4 Low-frequency reverb time ratio
LO.FREQ22.0 Hz-18.0 kHz Frequency point for LO.RATIO setting
DIFF.0-10  Reverb diffusion (left-right reverb spread)
ROOM SIZE0-28 Size of room
DECAY0-53 Gate closing speed
HPFTHRU, 22.0 Hz-8.00 kHz High-pass filter cutoff frequency
LPF1.00 kHz-18.0 kHz, THRU Low-pass filter cutoff frequencyParameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
LO. RATIO0.1-2.4 Low-frequency reverb time ratio
DIFF.0-10 Reverb diffusion (left-right reverb spread)
DENSITY0-100% Reverb density
E/R DLY0.0-100.0 ms Delay between early reflections and reverb
E/R BAL.0-100%Balance of early reflections and reverb
(0% = all reverb, 100% = all early reflections)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
GATE LVLOFF, -60 to 0 dB Level at which gate kicks in
AT TA C K0-120 ms Gate opening speed
HOLD
*1
*1. 0.02 ms-2.13 s (fs=44.1 kHz), 0.02 ms-1.96 s (fs=48 kHz)Gate open time
DECAY
*2
*2. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)Gate closing speed
    Add page 262 to Favourites
    image text
    Enable zoom 
    							 Data List
9
STEREO REVERBTwo input, two output stereo reverb.EARLY REF.One input, two output early reflections.
GATE REVERB, REVERSE GATEOne input, two output early reflections with gate, and early reflections with reverse gate.MONO DELAYOne input, one output basic repeat delay.STEREO DELAYTwo input, two output basic stereo delay.
Parameter
Range
Description
REV TIME0.3-99.0 s Reverb time
REV TYPEHall, Room, Stage, Plate Reverb type
INI. DLY0.0-100.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
LO. RATIO0.1-2.4 Low-frequency reverb time ratio
DIFF.0-10 Reverb diffusion (left-right reverb spread)
DENSITY0-100% Reverb density
E/R BAL.0-100%Balance of early reflections and reverb
(0% = all reverb, 100% = all early reflections)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
Parameter
Range
Description
TYPES-Hall, L-Hall, Random, 
Revers, Plate, SpringType of early reflection simulation
ROOMSIZE0.1-20.0 Reflection spacing
LIVENESS0-10 Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY0.0-500.0 ms Initial delay before reverb begins
DIFF.0-10 Reflection diffusion (left-right reflection spread)
DENSITY0-100% Reflection density
ER NUM.1-19 Number of early reflections
FB GAIN-99 to +99% Feedback gain
HI. RATIO0.1-1.0 High-frequency feedback ratio
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
Parameter
Range
Description
TYPEType-A, Type-B Type of early reflection simulation
ROOMSIZE0.1-20.0 Reflection spacing
LIVENESS0-10 Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY0.0-500.0 ms Initial delay before reverb begins
DIFF.0-10 Reflection diffusion (left-right reflection spread)
DENSITY0-100% Reflection density
HI. RATIO0.1-1.0 High-frequency feedback ratio
ER NUM.1-19 Number of early reflections
FB GAIN-99 to +99% Feedback gain
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
Parameter
Range
Description
DELAY0.0-2730.0 ms Delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
HI. RATIO0.1-1.0 High-frequency feedback ratio
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1. (Maximum value depends on the tempo 
setting)Used in conjunction with TEMPO to determine DELAYParameter
Range
Description
DELAY L0.0-1350.0 ms Left channel delay time
DELAY R0.0-1350.0 ms Right channel delay time
FB. G L-99 to +99%Left channel feedback (plus values for normal-phase feedback, minus 
values for reverse-phase feedback)
FB. G R-99 to +99%Right channel feedback (plus values for normal-phase feedback, minus 
values for reverse-phase feedback)
HI. RATIO0.1-1.0 High-frequency feedback ratio
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNCOFF/ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
    Add page 263 to Favourites
    image text
    Enable zoom 
    							 Data List
10
MOD. DELAYOne input, two output basic repeat delay with modulation.DELAY LCROne input, two output 3-tap delay (left, center, right).
ECHOTwo input, two output stereo delay with crossed feedback loop.CHORUSTwo input, two output chorus effect.
Parameter
Range
Description
DELAY0.0-2725.0 ms Delay time
FB. GAIN-99 to +99% Feedback gain
HI. RATIO0.1-1.0 High-frequency feedback ratio
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
WAVESine/Tri Modulation waveform
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNCOFF/ON Tempo parameter sync on/off
DLY.NOTE
*1
*1. (Maximum value depends on the tempo setting)Used in conjunction with TEMPO to determine DELAY
MOD.NOTE
*2
*2.Used in conjunction with TEMPO to determine FREQParameter
Range
Description
DELAY L0.0-2730.0 ms Left channel delay time
DELAY C0.0-2730.0 ms Center channel delay time
DELAY R0.0-2730.0 ms Right channel delay time
FB. DLY0.0-2730.0 ms Feedback delay time
LEVEL L-100 to +100% Left channel delay level
LEVEL C-100 to +100% Center channel delay level
LEVEL R-100 to +100% Right channel delay level
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
HI. RATIO0.1-1.0 High-frequency feedback ratio
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNCOFF/ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)Used in conjunction with TEMPO to determine left channel DELAY
NOTE C
*1
Used in conjunction with TEMPO to determine center channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
NOTE FB
*1
Used in conjunction with TEMPO to determine feedback DELAY
Parameter
Range
Description
DELAY L0.0-1350.0 ms Left channel delay time
DELAY R0.0-1350.0 ms Right channel delay time
FB.DLY L0.0-1350.0 ms Left channel feedback delay time
FB.DLY R0.0-1350.0 ms Right channel feedback delay time
FB. G L-99 to +99%Left channel feedback gain (plus values for normal-phase feedback, minus 
values for reverse-phase feedback)
FB. G R-99 to +99%Right channel feedback gain (plus values for normal-phase feedback, 
minus values for reverse-phase feedback)
LR FBG-99 to +99%Left to right channel feedback gain (plus values for normal-phase feedback, 
minus values for reverse-phase feedback)
RL FBG-99 to +99%Right to left channel feedback gain (plus values for normal-phase feedback, 
minus values for reverse-phase feedback)
HI. RATIO0.1-1.0 High-frequency feedback ratio
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
SYNCOFF/ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
NOTE FBL
*1
Used in conjunction with TEMPO to determine left channel feedback 
DELAY
NOTE FBR
*1
Used in conjunction with TEMPO to determine right channel feedback 
DELAY
Parameter
Range
Description
FREQ.0.05-40.00 Hz Modulation speed
AM DEPTH0-100% Amplitude modulation depth
PM DEPTH0-100% Pitch modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
WAVESine, Tri Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQ
LSH F21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G-12.0 to +12.0 dB Low shelving filter gain
EQ F100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G-12.0 to +12.0 dB EQ (peaking type) gain
EQ Q10.0-0.10 EQ (peaking type) bandwidth
HSH F50.0 Hz-16.0 kHz High shelving filter frequency
HSH G-12.0 to +12.0 dB High shelving filter gain
    Add page 264 to Favourites
    image text
    Enable zoom 
    							 Data List
11
FLANGETwo input, two output flange effect.SYMPHONICTwo input, two output symphonic effect.
PHASERTwo input, two output 16-stage phaser.DYNA.FLANGETwo input, two output dynamically controlled flanger.
Parameter
Range
Description
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
WAVESine, Tri Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQ
LSH F21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G-12.0 to +12.0 dB Low shelving filter gain
EQ F100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G-12.0 to +12.0 dB EQ (peaking type) gain
EQ Q10.0-0.10 EQ (peaking type) bandwidth
HSH F50.0 Hz-16.0 kHz High shelving filter frequency
HSH G-12.0 to +12.0 dB High shelving filter gainParameter
Range
Description
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
WAVESine, Tri Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQ
LSH F21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G-12.0 to +12.0 dB Low shelving filter gain
EQ F100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G-12.0 to +12.0 dB EQ (peaking type) gain
EQ Q10.0-0.10 EQ (peaking type) bandwidth
HSH F50.0 Hz-16.0 kHz High shelving filter frequency
HSH G-12.0 to +12.0 dB High shelving filter gain
Parameter
Range
Description
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
OFFSET0-100 Lowest phase-shifted frequency offset
PHASE0.00-354.38 degrees Left and right modulation phase balance
STAGE2, 4, 6, 8, 10, 12, 14, 16 Number of phase shift stages
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQ
LSH F21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G-12.0 to +12.0 dB Low shelving filter gain
HSH F50.0 Hz-16.0 kHz High shelving filter frequency
HSH G-12.0 to +12.0 dB High shelving filter gainParameter
Range
Description
SOURCEINPUT, MIDI Control source: input signal or MIDI Note On velocity
SENSE0-100 Sensitivity
DIR.UP, DOWN Upward or downward frequency change
DECAY
*1
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)Decay speed
OFFSET0-100 Delay time offset
FB.GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
LSH F21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G-12.0 to +12.0 dB Low shelving filter gain
EQ F100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G-12.0 to +12.0 dB EQ (peaking type) gain
EQ Q10.0-0.10 EQ (peaking type) bandwidth
HSH F50.0 Hz-16.0 kHz High shelving filter frequency
HSH G-12.0 to +12.0 dB High shelving filter gain
    Add page 265 to Favourites
    image text
    Enable zoom 
    							 Data List
12
DYNA.PHASERTwo input, two output dynamically controlled phaser.HQ.PITCHOne input, two output high-quality pitch shifter.
DUAL PITCHTwo input, two output pitch shifter.TREMOLOTwo input, two output tremolo effect.
Parameter
Range
Description
SOURCEINPUT, MIDIControl source:
input signal or MIDI Note On velocity
SENSE0-100 Sensitivity
DIR.UP, DOWN Upward or downward frequency change
DECAY
*1
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)Decay speed
OFFSET0-100 Lowest phase-shifted frequency offset
FB.GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
STAGE2, 4, 6, 8, 10, 12, 14, 16 Number of phase shift stages
LSH F21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G-12.0 to +12.0 dB Low shelving filter gain
HSH F50.0 Hz-16.0 kHz High shelving filter frequency
HSH G-12.0 to +12.0 dB High shelving filter gainParameter
Range
Description
PITCH-12 to +12 semitones Pitch shift
FINE-50 to +50 cents Pitch shift fine
DELAY0.0-1000.0 ms Delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
MODE1-10 Pitch shift precision
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1. (Maximum value depends on the tempo setting)Used in conjunction with TEMPO to determine DELAY
Parameter
Range
Description
PITCH 1-24 to +24 semitones Channel #1 pitch shift
FINE 1-50 to +50 cents Channel #1 pitch shift fine
LEVEL 1-100 to +100%Channel #1 level (plus values for normal phase, minus values for reverse 
phase)
PAN  1L63 to R63 Channel #1 pan
DELAY 10.0-1000.0 ms Channel #1 delay time
FB. G 1-99 to +99%Channel #1 feedback gain (plus values for normal-phase feedback, minus 
values for reverse-phase feedback)
MODE1-10 Pitch shift precision
PITCH 2-24 to +24 semitones Channel #2 pitch shift
FINE 2-50 to +50 cents Channel #2 pitch shift fine
LEVEL 2-100 to +100%Channel #2 level (plus values for normal phase, minus values for reverse 
phase)
PAN  2L63 to R63 Channel #2 pan
DELAY 20.0-1000.0 ms Channel #2 delay time
FB. G 2-99 to +99%Channel #2 feedback gain (plus values for normal-phase feedback, minus 
values for reverse-phase feedback)
SYNCOFF/ON Tempo parameter sync on/off
NOTE 1
*1
*1. (Maximum value depends on the tempo setting)Used in conjunction with TEMPO to determine Channel #1 delay
NOTE 2
*1
Used in conjunction with TEMPO to determine Channel #2 delay
Parameter
Range
Description
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
WAVESine, Tri, Square Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQ
LSH F21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G-12.0 to +12.0 dB Low shelving filter gain
EQ F100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G-12.0 to +12.0 dB EQ (peaking type) gain
EQ Q10.0-0.10 EQ (peaking type) bandwidth
HSH F50.0 Hz-16.0 kHz High shelving filter frequency
HSH G-12.0 to +12.0 dB High shelving filter gain
    Add page 266 to Favourites
    image text
    Enable zoom 
    							 Data List
13
AUTOPANTwo input, two output autopanner.ROTARYOne input, two output rotary speaker simulator.
RING MOD.Two input, two output ring modulator.MOD.FILTERTwo input, two output modulation filter.DYNA.FILTERTwo input, two output dynamically controlled filter.
Parameter
Range
Description
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
DIR.
*1
*1. LR, LR, LR ,  Tu r n  L ,  Tu r n  RPanning direction
WAVESine, Tri, Square Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*2
*2.Used in conjunction with TEMPO to determine FREQ
LSH F21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G-12.0 to +12.0 dB Low shelving filter gain
EQ F100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G-12.0 to +12.0 dB EQ (peaking type) gain
EQ Q10.0-0.10 EQ (peaking type) bandwidth
HSH F50.0 Hz-16.0 kHz High shelving filter frequency
HSH G-12.0 to +12.0 dB High shelving filter gainParameter
Range
Description
ROTATESTOP, START Rotation stop, start
SPEEDSLOW, FASTRotation speed
(see SLOW and FAST parameters)
SLOW0.05-10.00 Hz SLOW rotation speed
FAST0.05-10.00 Hz FAST rotation speed
DRIVE0-100 Overdrive level
ACCEL0-10 Acceleration at speed changes
LOW0-100 Low-frequency filter
HIGH0-100 High-frequency filter
Parameter
Range
Description
SOURCEOSC, SELF Modulation source: oscillator or input signal
OSC FREQ0.0-5000.0 Hz Oscillator frequency
FM FREQ.0.05-40.00 Hz Oscillator frequency modulation speed
FM DEPTH0-100% Oscillator frequency modulation depth
SYNCOFF/ON Tempo parameter sync on/off
FM NOTE
*1
*1.Used in conjunction with TEMPO to determine FM FREQParameter
Range
Description
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
PHASE0.00-354.38 degrees Left-channel modulation and right-channel modulation phase difference
TYPELPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET0-100 Filter frequency offset
RESO.0-20 Filter resonance
LEVEL0-100 Output level
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQParameter
Range
Description
SOURCEINPUT, MIDIControl source:
input signal or MIDI Note On velocity
SENSE0-100 Sensitivity
DIR.UP, DOWN Upward or downward frequency change
DECAY
*1
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)Filter frequency change decay speed
TYPELPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET0-100 Filter frequency offset
RESO.0-20 Filter resonance
LEVEL0-100 Output level
    Add page 267 to Favourites
    image text
    Enable zoom 
    							 Data List
14
REV+CHORUSOne input, two output reverb and chorus effects in parallel.REVCHORUSOne input, two output reverb and chorus effects in series.
REV+FLANGEOne input, two output reverb and flanger effects in parallel.REVFLANGEOne input, two output reverb and flanger effects in series.
Parameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reverb density
REV/CHO0-100%Reverb and chorus balance
(0% = all reverb, 100% = all chorus)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
FREQ.0.05-40.00 Hz Modulation speed
AM DEPTH0-100% Amplitude modulation depth
PM DEPTH0-100% Pitch modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
WAVESine, Tri Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQParameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reverb density
REV.BAL0-100%Reverb and chorused reverb balance
(0% = all chorused reverb, 100% = all reverb)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
FREQ.0.05-40.00 Hz Modulation speed
AM DEPTH0-100% Amplitude modulation depth
PM DEPTH0-100% Pitch modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
WAVESine, Tri Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQ
Parameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reverb density
REV/FLG0-100%Reverb and flange balance
(0% = all reverb, 100% = all flange)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
WAVESine, Tri Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQParameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reverb density
REV.BAL0-100%Reverb and flanged reverb balance
(0% = all flanged reverb, 100% = all reverb)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
WAVESine, Tri Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQ
    Add page 268 to Favourites
    image text
    Enable zoom 
    							 Data List
15
REV+SYMPHO.One input, two output reverb and symphonic effects in parallel.REVSYMPHO.One input, two output reverb and symphonic effects in series.
REVPA NThis is a 1-in/2-out series-connected reverb and auto-pan effect.DELAY+ER.One input, two output delay and early reflections effects in parallel.
Parameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reverb density
REV/SYM0-100%Reverb and symphonic balance
(0% = all reverb, 100% = all symphonic)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
WAVESine, Tri Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQParameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reverb density
REV.BAL0-100%Reverb and symphonic reverb balance
(0% = all symphonic reverb, 100% = all reverb)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
WAVESine, Tri Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*1
*1.Used in conjunction with TEMPO to determine FREQ
Parameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reverb density
REV.BAL0-100%Reverb and panned reverb balance (0% = all panned reverb, 100% = all 
reverb)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
DIR.
*1
*1. LR, LR, LR, Turn L, Turn RPanning direction
WAVESine, Tri, Square Modulation waveform
SYNCOFF/ON Tempo parameter sync on/off
NOTE
*2
*2.Used in conjunction with TEMPO to determine FREQParameter
Range
Description
DELAY L0.0-1000.0 ms Left channel delay time
DELAY R0.0-1000.0 ms Right channel delay time
FB. DLY0.0-1000.0 ms Feedback delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
HI. RATIO0.1-1.0 High-frequency feedback ratio
DLY/ER0-100%Delay and early reflections balance (0% = all delay, 100% = all early 
reflections)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
TYPES-Hall, L-Hall, Random, 
Revers, Plate, SpringType of early reflection simulation
ROOMSIZE0.1-20.0 Reflection spacing
LIVENESS0-10 Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY0.0-500.0 ms Initial delay before reverb begins
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reflection density
ER NUM.1-19 Number of early reflections
SYNCOFF/ON
Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)
Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
NOTE FB
*1
Used in conjunction with TEMPO to determine feedback DELAY
    Add page 269 to Favourites
    image text
    Enable zoom 
    							 Data List
16
DELAYER.One input, two output delay and early reflections effects in series.DELAY+REVOne input, two output delay and reverb effects in parallel.
DELAYREVOne input, two output delay and reverb effects in series.
Parameter
Range
Description
DELAY L0.0-1000.0 ms Left channel delay time
DELAY R0.0-1000.0 ms Right channel delay time
FB. DLY0.0-1000.0 ms Feedback delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
HI. RATIO0.1-1.0 High-frequency feedback ratio
DLY.BAL0-100%Delay and early reflected delay balance
(0% = all early reflected delay, 100% = all delay)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
TYPES-Hall, L-Hall, Random, 
Revers, Plate, SpringType of early reflection simulation
ROOMSIZE0.1-20.0 Reflection spacing
LIVENESS0-10 Early reflections decay characteristics (0 = dead, 10 = live)
INI. DLY0.0-500.0 ms Initial delay before reverb begins
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reflection density
ER NUM.1-19 Number of early reflections
SYNCOFF/ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
NOTE FB
*1
Used in conjunction with TEMPO to determine feedback DELAY
Parameter
Range
Description
DELAY L0.0-1000.0 ms Left channel delay time
DELAY R0.0-1000.0 ms Right channel delay time
FB. DLY0.0-1000.0 ms Feedback delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
DELAY HI0.1-1.0 High-frequency feedback ratio
DLY/REV0-100%Delay and reverb balance
(0% = all delay, 100% = all reverb)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
REV HI0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reverb density
SYNCOFF/ON Tempo parameter sync on/off
NOTE L
*1
Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
NOTE FB
*1
Used in conjunction with TEMPO to determine feedback DELAY
*1. (Maximum value depends on the tempo setting)
Parameter
Range
Description
DELAY L0.0-1000.0 ms Left channel delay time
DELAY R0.0-1000.0 ms Right channel delay time
FB. DLY0.0-1000.0 ms Feedback delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
DELAY HI0.1-1.0 High-frequency feedback ratio
DLY.BAL0-100%Delay and delayed reverb balance
(0% = all delayed reverb, 100% = all delay)
HPFTHRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency
LPF50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
REV HI0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100% Reverb density
SYNCOFF/ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)Used in conjunction with TEMPO to determine left channel DELAY
NOTE R
*1
Used in conjunction with TEMPO to determine right channel DELAY
NOTE FB
*1
Used in conjunction with TEMPO to determine feedback DELAY
Parameter
Range
Description
    Add page 270 to Favourites
    image text
    Enable zoom 
    							 Data List
17
DISTDELAYOne input, two output distortion and delay effects in series.MULTI FILTERTwo input, two output 3-band multi-filter (24 dB/octave).
FREEZEOne input, two output basic sampler.DISTORTIONOne input, two output distortion effect.
Parameter
Range
Description
DST TYPEDST1, DST2, OVD1, 
OVD2, CRUNCHDistortion type (DST = distortion, OVD = overdrive)
DRIVE0-100 Distortion drive
MASTER0-100 Master volume
TONE-10 to +10 Tone control
N. GATE0-20 Noise reduction
SYNCOFF/ON Tempo parameter sync on/off
DLY.NOTE
*1
*1. (Maximum value depends on the tempo 
setting)Used in conjunction with TEMPO to determine DELAY
MOD.NOTE
*2
*2.Used in conjunction with TEMPO to determine FREQ
DELAY0.0-2725.0 ms Delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
HI. RATIO0.1-1.0 High-frequency feedback ratio
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
DLY.BAL0-100%Distortion and delay balance
(0% = all distortion, 100% = all delayed distortion)Parameter
Range
Description
TYPE 1LPF, HPF, BPF Filter 1 type: high pass, low pass, band pass
FREQ. 128.0 Hz-16.0 kHz Filter 1 frequency
LEVEL 10-100 Filter 1 level
RESO. 10-20 Filter 1 resonance
TYPE 2LPF, HPF, BPF Filter 2 type: high pass, low pass, band pass
FREQ. 228.0 Hz-16.0 kHz Filter 2 frequency
LEVEL 20-100 Filter 2 level
RESO. 20-20 Filter 2 resonance
TYPE 3LPF, HPF, BPF Filter 3 type: high pass, low pass, band pass
FREQ. 328.0 Hz-16.0 kHz Filter 3 frequency
LEVEL 30-100 Filter 3 level
RESO. 30-20 Filter 3 resonance
Parameter
Range
Description
REC MODEMANUAL, INPUTIn MANUAL mode, recording is started by pressing the REC and PLAY 
buttons. In INPUT mode, Record-Ready mode is engaged by pressing the 
REC button, and actual recording is triggered by the input signal.
REC DLY-1000 to +1000 msRecording delay.
For plus values, recording starts after the trigger is received. For minus 
values, recording starts before the trigger is received.
PLY MODEMOMENT, CONTI., 
INPUTIn MOMENT mode, the sample plays only while the PLAY button is 
pressed. In CONT mode, playback continues once the PLAY button has 
been pressed. The number of times the sample plays is set using the LOOP 
NUM parameter. In INPUT mode, playback is triggered by the input signal. 
TRG LVL-60 to 0 dBInput trigger level (i.e., the signal level required to trigger recording or 
playback)
TRG MASK0-1000 msOnce playback has been triggered, subsequent triggers are ignored for the 
duration of the TRG MASK time.
START
*1
*1. 0.0-5941.0 ms (fs=44.1 kHz), 0.0 ms-5458.3 ms (fs=48 kHz)Playback start point in milliseconds
END
*1
Playback end point in milliseconds
LOOP
*1
Loop start point in milliseconds
LOOP 
NUM0-100 Number of times the sample plays
PITCH-12 to +12 semitones Playback pitch shift
FINE-50 to +50 cents Playback pitch shift fine
MIDI TRGOFF, C1-C6, ALL The PLAY button can be triggered by using MIDI Note on/off messages.
START 
[SAMPLE]0-131000 Playback start point in samples
END 
[SAMPLE]0-131000 Playback end point in samples
LOOP 
[SAMPLE]0-131000 Loop start point in samples
Parameter
Range
Description
DST TYPEDST1, DST2, OVD1, 
OVD2, CRUNCHDistortion type (DST = distortion, OVD = overdrive)
DRIVE0-100 Distortion drive
MASTER0-100 Master volume
TONE-10 to +10 Tone control
N. GATE0-20 Noise reduction
    All Yamaha manuals Comments (0)

    Related Manuals for Yamaha Cl 5 User Guide