Yamaha Cl 5 User Guide

MIDI
 Reference Manual
171
MIDI/GPI screen (CONTROL CHANGE page)You can specify how Control Changes will be transmitted and received, and specify the event 
(fader/knob operation, [ON] key on/off operation, etc.) assigned to each control number.1
CONTROL CHANGE field
Enables you to switch Control Change transmission/reception on or off, and specify 
whether Control Changes will be echoed out. This setting is linked with the CONTROL 
CHANGE field on the MIDI SETUP page.
•Tx...

MIDI
 Reference Manual
172
MIDI CONTROL CHANGE windowDisplay this window by pressing any event in the CONTROL CHANGE page. In this window, 
you can specify the event assigned to each control number.1
MODE field
Enables you to select the type of event.
2
PARAMETER 1/2 field
In conjunction with the MODE field, this field specifies the type of event.
3
OK button
Confirms the settings and closes the window.
NOTE• The list shown is the same for all models of the CL series. For the CL3/CL1, the display will...

Recorder
 Reference Manual
173
RecorderThis chapter explains the functionality and operation of the recorder.About the USB memory recorderThe CL series console features a USB memory recorder function that lets you easily record 
internal audio signals to a USB flash drive, or play back audio files recorded on a USB flash 
drive.
As the file format for recording, the CL series console supports MP3 (MPEG-1 Audio Layer-
3). For playback, it supports MP3 as well as WMA (Windows Media Audio) and AAC (MPEG-
4...

Recorder
 Reference Manual
174
RECORDER screen (when selecting the USB tab)In this screen you can assign signals to the input and output of the USB memory recorder, 
and perform recording and playback operations.1
RECORDER INPUT L/R buttons
Press these buttons to open the CH SELECT window, in which you can select the signals 
patched to the recorder's L/R input channels.
2
RECORDER INPUT GAIN knob
Sets the level of the signal input to the recorder.
3
RECORDER INPUT CUE button
When this button is...

Recorder
 Reference Manual
175
Recording audio to a USB flash driveYou can record the signal of the desired output channels as an audio file (MP3) onto the USB 
flash drive inserted in the USB connector located to the right of the display.
NOTE
• The FREE SIZE field indicates the amount of free capacity in the USB flash drive.
• The signal being recorded will not be output from the recorder output jacks (PLAYBACK OUT).
• The level meter on the RECORDER screen shows the signal level before and after the...

Recorder
 Reference Manual
176
5
REC RATE button
Switches the recording rate.
You can choose 96 kbps, 128 kbps, or 192 kbps. Higher bit rates will improve the audio 
quality, but will increase the size of the data.
NOTEThe word clock rate at which the CL series console is currently operating will automatically be 
selected as the sampling rate for the audio file.
6
Display Switch Button
Switches between displaying and hiding the RECORDER INPUT/PLAYBACK OUTPUT 
fields at the bottom of the song list.
7
REW...

Recorder
 Reference Manual
177
Playing back audio files from a USB flash driveYou can play back audio files that have been saved on your USB flash drive. In addition to files 
that were recorded on the CL series console, you can also play files that were copied from 
your computer to the USB flash drive.
The three types of file format that can be played are MP3 (MPEG-1 Audio Layer-3), WMA 
(Windows Media Audio), and AAC (MPEG-4 AAC). The playable sampling rates are 44.1 kHz 
and 48 kHz. The supported bit...

Recorder
 Reference Manual
178
4
Sub-directory
Indicates each song's track number, the name of upper level directory, and whether a 
sub-directory exists (in the case that the directory has been selected).
•Upper level............Press this to move up to the directory that is one level higher than 
the current one.
•Sub-directory................Press this to move to that sub-directory.
NOTE• If you switch folders, that folder will be selected as the recording destination.
• The folders that can be...

Recorder
 Reference Manual
179
RECORDER screen (when selecting the USB tab)1
SONG TITLE/FILE NAME EDIT button
Enables you to edit the title of the song selected in the list.
2
ARTIST EDIT button
Enables you to edit the artist name of the song selected in the list.
NOTEA maximum of 128 single-byte characters (64 double-byte characters) can be input for both the 
title and for the artist name. If the title cannot be shown completely, scroll horizontally.
3
SONG TITLE/FILE NAME SORT button
Sorts the list in...

Recorder
 Reference Manual
180
Word clock settingsIn a Dante network, the master device supplies accurate word clock to other devices on the 
network. If the master device is removed from the network or breaks down, another device 
will automatically take over as the clock master.
To make this setting, in the Function Access Area, press the SETUP button, then the WORD 
CLOCK/SLOT SETUP button to access the WORD CLOCK/SLOT SETUP window.
Setting up Dante Virtual SoundcardInstall Dante Virtual Soundcard...