Yamaha Cl 5 User Guide

Setup
 Reference Manual
191
Logging-inTo operate the CL series console, you must log in as the Administrator, Guest, or a User.
User settings for the Administrator and Guest are saved in the console itself. However, to log 
in as a User you must either select a key that is saved in the console itself, or connect the 
USB flash drive in which a user authentication key has been saved. If you use a user 
authentication key on a USB flash drive, you will continue as the logged-in user even if you 
remove the...

Setup
 Reference Manual
192
NOTE• If no password has been set, you will simply be logged-in in step 3 when you press the LOGIN 
button.
• If the password was incorrect, a message of “WRONG PASSWORD” will appear near the bottom 
of the screen.
With a user authentication key stored in a USB flash driveNOTE
• If no password has been set, you will simply be logged-in in step 6 when you press the LOAD 
button.
• If the password was incorrect, a message of “WRONG PASSWORD” will appear near the bottom 
of the...

Setup
 Reference Manual
193
Editing a user authentication keyIf you are logged-in as a user, you can edit your USER DEFINED keys, preference settings, 
comments and password, and save them onto your user authentication key. If you are logged-
in as a Power User, you can also change the user level.
NOTE
• If you are logged-in as a Power User, you can also change the user level.
• If you loaded a user authentication key from a USB flash drive, press the SAVE KEY button before 
removing the USB flash drive....

Setup
 Reference Manual
194
USER SETUP window1
CH OPERATIONHere you can specify (for each channel) the operations that will be permitted for input 
channels, output channels, and DCA groups. The settings will apply to the currently-
selected channel. Settings for currently-selected channels will be displayed below the 
CH OPERATION section. Use the panel [SEL] keys or the Selected Channel field in the 
Function Access Area to select the channel for which you want to make settings.
The type of buttons...

Setup
 Reference Manual
195
5
FILE LOAD
Specifies the types of file that can be loaded from USB flash drives. The user 
authentication key contains the user level, USER DEFINED keys, and Preference settings. 
Other data is saved in an “ALL” file. The “ALL” file also includes the USER SETUP settings 
of the Administrator and the Guest.
• USER SETUP (USER DEFINED keys and Preferences settings)
• SYSTEM SETUP/MONITOR SETUP
• CURRENT SCENE
• SCENE LIST
• LIBRARY LIST
6
MONITOR SETUP
Specifies the monitor...

Setup
 Reference Manual
196
• STORE CONFIRMATION
• RECALL CONFIRMATION
If these ON buttons are lit, a confirmation message will appear when you perform a 
Store or Recall operation respectively.2
PAT C H  f i e l d
Enables you to turn on or off options related to patch operations.
• PATCH CONFIRMATION
If this ON button is lit, a confirmation message will appear when you edit an input patch 
or output patch.
• STEAL PATCH CONFIRMATION
If this ON button is lit, a confirmation message will appear when you...

Setup
 Reference Manual
197
USER DEFINED keysThis section explains how to assign the desired functions to the USER DEFINED keys in the 
USER DEFINED KEYS section on the top panel, and to press these keys to execute the 
defined function.
If you are logged-in as a user, you can make USER DEFINED key settings for the user. If you 
are logged-in as the Administrator, you can also make the USER DEFINED key settings for 
the Guest account.
NOTE
For details on the assignable functions and their parameters,...

Setup
 Reference Manual
198
In Alternate mode, the following knobs change their behavior.
• [GAIN] knob
Rotate the knob to adjust the digital gain value. If DIGITAL GAIN has been selected for 
HA KNOB FUNCTION on the PREFERENCE page in the USER SETUP window, rotate this 
knob to adjust the analog gain value of the head amp.
• [MIX/MATRIX] knob
Rotate this knob to switch between PRE and POST for the corresponding send signal. 
Press this knob to switch the corresponding send signal on or off.
•[HPF] knob...

Setup
 Reference Manual
199
Functions that can be assigned to USER DEFINED keysFUNCTION
PARAMETER 1
PARAMETER 2
Description
NO ASSIGN - - No assignment.
ALTERNATE 
FUNCTIONLATCH -Toggle ALTERNATE FUNCTION each time it is 
pressed.
It goes OFF when the bank is switched.
UNLATCH -Switch to ALTERNATE FUNCTION only while 
pressed.
It goes OFF when the bank is switched.
AUTOMIXERgroup a OVERRIDE ON -Apply a fade-in to the channels in group a 
where the override button is on, until the level 
drops to 0 dB...

Setup
 Reference Manual
200
EDITOR 
CONTROLPREMIUM RACK 
LIBRARYPortico5033 LIBRARY
Access the corresponding screen of CL Editor. Portico5043 LIBRARY
U76 LIBRARY
Opt-2A LIBRARY
EQ-1A LIBRARY
DynamicEQ LIBRARY
Buss Comp 369 LIBRARY
PAT C H  E D I T O RINPUT PATCH
OUTPUT PATCH
INPUT INSERT PATCH
OUTPUT INSERT PATCH
DIRECT OUT PATCH
PAT C H  L I S T
RACK EDITORRACK
GEQ 1-16
EFFECT 1-8
PREMIUM 1A
PREMIUM 1B
:
PREMIUM 8A
PREMIUM 8B
METERINPUT METER
OUTPUT METER
GROUP/LINKDCA GROUP
MUTE GROUP
CHANNEL LINK...