Yamaha Cl 5 User Guide

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
131
When you press one of these buttons, the faders for the bands selected on screen will 
turn white, and the numbers of the corresponding faders in the Centralogic section will 
be displayed. Now you can use the faders in the Centralogic section to control the 
bands.
NOTEThe above operation is possible even if the Centralogic section is locked. When you turn off the 
button in the FADER ASSIGN field, it will return to the locked...

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
132
Parametric EQ operationsIn addition to the standard 4-band EQ, CL series consoles also feature an 8-band parametric 
EQ (PEQ) that can be rack mounted. You can mount this PEQ in GEQ racks 1-16 and patch 
it to the insert-out/in of an input channel (GEQ 1-8 rack only), a MIX/MATRIX channel, or a 
STEREO/MONO channel. You can also mount it in EFFECT racks 1-8 (FX 1-8) and patch it 
to the insert-out/in of an input channel,...

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
133
6
COPY button
All EQ parameter settings will be copied in buffer memory.
7
PA S T E  b u t t o n
Press this button to paste the copied settings from buffer memory to the current EQ. If 
no valid data has been copied in the buffer memory, nothing will happen.
8
COMPARE button
Press this button to swap between the current EQ settings and the data stored in buffer 
memory. If no valid data has been copied in the buffer memory,...

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
134
1
BYPASS button
You can bypass each band.
2
HPF/LPF NOTCH button
Press this button to switch to the screen for operating HPF/LPF/notch filters.
3
EQ parameter setting knobs
Indicates the Q, FREQUENCY, and GAIN parameters for the BAND1 - BAND8 bands. You 
can use the [TOUCH AND TURN] knob to adjust this.
PEQ EDIT window (HPF/LPF NOTCH)1
Attenuation select button
There are four types of HPF and LPF. This button switches the...

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
135
About AUTOMIXERAutomixer is included as a standard feature on the CL series. Automixer searches for enabled 
mics and automatically optimizes gain distribution, for uses such as speeches without scripts. 
This allows uniform system gain to be maintained among multiple mics, freeing the engineer 
from making constant fader adjustments.Automixer operating principleWith the Dugan speech system used in Automixer, you can automatically...

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
136
Channel control fieldEach channel is always in man, auto, or mute mode. The indicator for the enabled channel 
mode will light. To select a mode, either press the button for that mode or press the PRESET 
button in the master field.1
Level indicator
Lights green when the audio is at an optimum level for Automix.
NOTE• If the level indicator flashes, increase the input gain.
• If the level indicator lights up red, reduce the input...

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
137
6
Channel number
Displays the channel number and channel name of the channel to be inserted.
7
man/auto/mute
Toggles between man/auto/mute.
man: Passes the audio through without changing the gain.  This mode is used for 
singing with a mic.
auto: Turns on Automixer. This mode is used for conversations.
mute: Mutes channels.
8
preset
Selects the channel mode (man/auto/mute) when the PRESET button in the master field 
is pressed....

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
138
STEREO type effects
MIX type effectsIf a signal is assigned to only one input of a two-input effect, it will be processed as mono-in/
stereo-out regardless of whether a Stereo effect type or Mix effect type is selected. However, 
please note that this will not apply to COMP276, COMP276S, COMP260, COMP260S, 
EQUALIZER601, and OPENDECK.Using an internal effect via send and returnThis section explains how to use a MIX bus as an...

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
139
Adjusting the master level of the effect sendTo adjust the MIX channel you specified as the input source for the rack, first call it up to the 
Centralogic section and then make adjustments by operating the fader.
Set the level as high as possible without allowing the post-effect signal to reach the overload 
point.
NOTE
The input and output levels of the effect are shown by the input/output meters in the upper right 
of the...

Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
 Reference Manual
140
EFFECT EDIT windowAllows you to adjust the effect parameters.
NOTE
For details on the parameters of each effect type, refer to the data list at the end of this manual.
1
INPUT L/R buttons
Press this button to open the CH SELECT window.
2
OUTPUT L/R buttons
Press this button to open the CH SELECT window.
3
Effect type field
Displays the effect title, the name of the type that is used, and a graphic. The number 
of input and output...