Yamaha Cl 5 User Guide

Scene memory
 Reference Manual
101
Functions in Preview modeThe current scene will be modified by the following software and external operations.
• CL Editor
• StageMix
•MIDI Rx
• GPI IN
Similarly, edits for the current scene will be conveyed to the following software and external 
devices.
• CL Editor
• StageMix
•MIDI Tx
•GPI OUT
The meters will indicate the state of signal processing for the current scene.
Playback Link will operate for recalling the current scene.
If cascade-connected, both master and...

Monitor and Cue functions
 Reference Manual
102
Monitor and Cue functionsThe Monitor function lets you monitor various outputs through your nearfield monitors or 
headphones. Below the front pad of the CL series console is a PHONES out jack which 
always outputs the monitor source signal that you've selected for monitoring. By assigning the 
MONITOR OUT L/R/C channels to the desired output jacks, you can also monitor the same 
signal through external speakers.
You can select the following signals as...

Monitor and Cue functions
 Reference Manual
103
• MONITOR LEVEL
Adjusts the output level of the MONITOR OUT L/R/C channels. If PHONES LEVEL LINK 
is ON, this setting will also affect the level at the PHONES Out jack.
• MONITOR FADER
Use the STEREO MASTER fader or MONO MASTER fader to adjust the output level of the 
MONITOR OUT L/R/C channels. MONITOR FADER is positioned in series with 
MONITOR LEVEL. If PHONES LEVEL LINK is ON, this setting will also affect the level at 
the PHONES Out jack.
• ON...

Monitor and Cue functions
 Reference Manual
104
MONITOR screenIn the MONITOR screen, the MONITOR field lets you check the current monitor settings, and 
turn monitoring on/off.1
MONITOR display button
When you press this button, the MONITOR window will appear, in which you can make 
detailed monitor settings.
2
SOURCE SELECT field
Selects the monitor source. If DEFINE has been selected in this field, access the 
MONITOR window to specify the source channel.
3
DIMMER field
Enables you to make settings for...

Monitor and Cue functions
 Reference Manual
105
MONITOR windowYou can make detailed settings for monitoring. This window appears when you press the 
MONITOR display button or meter field in the MONITOR screen.SOURCE SELECT fieldThis field enables you to select the source signal for the MONITOR bus.1
Source selection buttons
Select one of the following as the signal source that will be output to the MONITOR bus.
DIMMER fieldThis field enables you to make settings for the Dimmer function, which...

Monitor and Cue functions
 Reference Manual
106
MONITOR FADER field
0
MONITOR FADER LEVEL knob
Indicates the monitor level. Press this knob to adjust the monitor level using the 
multifunction knob. Or, press the Centralogic section bank select [STEREO] key, and 
then use the monitor fader to adjust the level.
A
FADER ASSIGN indicator
Indicates the fader(s) to which the monitor level is assigned. Indicator assignments are 
as follows:
MONITOR DELAY fieldThis field enables you to specify the monitor...

Monitor and Cue functions
 Reference Manual
107
MONITOR screen (Monitor field in Surround mode)If you set a bus to Surround mode in BUS SETUP, the Monitor field in the MONITOR screen 
appears as shown below.1
SURROUND MONITOR display button
When you press this button, the SURROUND MONITOR window will appear, in which 
you can make detailed surround monitor settings.
2
SOURCE SELECT field
Selects the surround monitor source. If 2CH MONITOR has been selected in this field, 
use the SURROUND MONITOR window...

Monitor and Cue functions
 Reference Manual
108
3
DOWNMIX field
Select in which field to perform downmixes.
•STEREO button
Downmix in stereo mode.
•MONO button
Downmix in mono mode.
4
DOWNMIX SETUP button
Use this button to open the DOWNMIX SETUP screen. Set the parameters for 
downmixes.
5
Meter field
Shows the meters for the surround signal being monitored. The layout of the meters is 
the same as the layout set in the SURROUND SETUP screen.
6
Speaker Mute field
You can individually mute each speaker...

Monitor and Cue functions
 Reference Manual
109
DOWNMIX SETUP screenPress the DOWNMIX SETUP button in the SURROUND MONITOR screen to open this 
screen. The layout of the channels is the same as the layout set in the SURROUND SETUP 
screen.1
Output channel field
Selects the output channel. You can use the L and R buttons to switch each between on/
off.
2
Downmix parameter field
Sets the downmix parameters for each channel and the master channel monitors.
3
APPLY TO MIX1-6 TO STEREO button
Press this...

Monitor and Cue functions
 Reference Manual
110
NOTEIf STEREO/MONO channels are assigned to the Centralogic section, you can also use the [CUE] 
keys in the Centralogic section to enable Cue for this group.
4
Other CUE group
These cue signals are operated via buttons displayed on the 
touch screen. This group is enabled if you turn on the CUE 
button in the EFFECT window or the PREMIUM window, or 
if you turn on the KEY IN CUE button in the DYNAMICS 1 
window. This group will automatically be disabled...