Yamaha Av1 Service Manual

En
91
Registering favorite items (shortcut)You can register up to 40 favorite USB and network contents as 
shortcuts and access them directly by selecting the shortcut 
numbers. You can also use the “Bookmarks” feature to register Internet radio stations (p.83).■ Registering an itemSelect a desired item and register it to a shortcut number.1
Play back a song or a radi o station to be registered.
2
Press MEMORY. To change a shortcut number to which the item will be registered, use 
PRESET or numeric keys...

En
92
Controlling this unit from the web browser (web control)You can control this unit with the web control screen displayed in 
the web browser.
 To use this function, this unit and your PC must be connected to the network 
properly (p.42).
 Some security software installed on your PC may block the access of this  unit to your PC. In such cases, configure the security software appropriately.
 We recommend using Internet Explorer 7.x or 8.x as a web browser.
 If you set “Network Standby” (p.93) to “On”,...

En
93
■ Control screen1 PLAY INFOSelects an input source or controls playback for the selected zone.2TOP MENUMoves to the top menu screen.3SCENESelect a scene for the selected zone.4POWERTurns on/off the power for the selected zone.5VO LU M EAdjusts the volume or mutes the audio output for the selected zone 
(except Zone4). You can also switch the step for the volume adjustment.6RELOADReloads the current status of this unit.
■ Settings screen1 RenameEdits the friendly name (name for this unit in the...

En
94
Viewing the current status■ Switching information  on the front display1
Press INFO.Each time you press the key, the display item switches.
About 3 seconds later, the corresponding information 
appears. Available items vary depending on the selected input source. Also, the 
display item can be applied separately to each input source group.
■  Viewing the status information on the TV1
Press DISPLAY.The following information is displayed on the TV.
2
To close the information display, press DISPLAY....

En
95
You can configure the playback-related settings in accordance with a playback source. 
Since this menu is operational on the front panel (or on the TV screen), you can easily 
configure the settings during playback.1
Press OPTION.Front display
TV screen
2
Use the cursor keys to select an item and press ENTER. To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys ( / ) to select a setting and press ENTER.
4
To exit from the menu, press OPTION.
Option menu items...

En
96
■ Tone Control (Tone Control)Adjusts the high-frequency range (Treble)  and low-frequency range (Bass) of speaker 
sounds. When connecting headphones, you can adjust high-frequency range and low-
frequency range of sounds output from headphones.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0db ~ Bypass (Bypass) ~ +6.0dB *0.5dB steps
Default
Bypass (Bypass)
 If you set the balance extremely off, sounds may not match those from other channels well.Adjusting with the front panel controlsa...

En
97
■ Extended Surround (EXTD Surround)Selects how to play back 5.1- to 7. 1-channel sources when surround back speakers 
are used.
Settings
■  Volume Trim (Volume Trim)Corrects volume differences between input sources. If you are bothered by volume 
differences when switching between input s ources, use this function to correct it. This setting is applied separately to each input source.
Setting range
-6.0dB ~ +6.0dB (0.5dB steps)
Default
0.0dB
■ Enhancer (Enhancer)Enables/disables Compressed Music...

En
98
CONFIGURATIONSYou can change the input source settings using the TV screen.1
Press ON SCREEN.
2
Use the cursor keys to select “Input” and press ENTER.
3
Use the cursor keys ( / ) to select an input source to be configured 
and press the cursor key ( ).The input source of this unit also changes. You can still switch the input source by using cursor keys ( / ) after step 3.
4
Use the cursor keys ( / ) to select an item and press ENTER. To return to the previous screen during menu operations, press...

En
99
■ Rename/Icon SelectChanges the input source name and icon displayed on the front display or TV screen.
Input sources
AV1~7, V-AUX, AUDIO1~4, PHONO, USB, DOCK, MULTI CH
■  Setup procedure1
Use the cursor keys ( / ) to select an icon and press the cursor key ( ).
2
Press ENTER, use the cursor keys to rename, and then press ENTER again.
3
Use the cursor keys to select “OK” and press ENTER. To clear the entry, select “CLEAR”.
4
To exit from the menu, press ON SCREEN.
■ Decoder ModeSets the format of...

En100
■ Video OutSelects a video to be output with the audio input source.
Input sources
TUNER, (network sources), USB, MULTI CH
Settings
■ DMC ControlSelects whether to allow DLNA-compatible  Digital Media Controller (DMC) to control 
playback.
Input source
PC
Settings
 A Digital Media Controller (DMC) is a device that can control other network devices through the network.  When this function is enabled, you can control playback of this unit from DMCs (Windows Media Player 12, 
etc.) on the same...