Yamaha Av1 Service Manual

En131
7
To exit from the setup menu, press SETUP. For details on how to register the input selection key applied the remote control code on a corresponding SCENE key, refer to “Configuring scene 
assignments” (p.59).
❑  Playback device operationsOnce you have registered the remote control code for your 
playback device, you can control it using the following keys after 
selecting the input source or scene. By pressing SOURCE/RECEIVER, you can switch the devices (this unit or 
external device) to operate...

En132
5
Aim the infrared transmitters of the remote controls 
at each other.
6
Perform the following steps ( a and b) within 10 
seconds.a On this unit, press one of the following keys to which you want to 
assign a function.
For playback device:  SOURCE  , menu operations keys, 
DISPLAY, MODE, external device operation keys, numeric keys
For TV:  TV operation keys
b On the external device, press the key from which the operation 
is learned until “OK” appears in the display window.If “NG” appears,...

En133
4
Press ENTER.
5
Use the cursor keys to rename.To locate the position, use the cursor keys ( / ).
To select a character (A to Z, a to z, 0 to 9, space, 
symbols), use the cursor keys ( / ).
6
Press ENTER to set the new name.Once the new name is set successfully, “OK” appears in the 
display window.
7
To edit another device name (or scene name), repeat 
steps 3 to 6.
8
To exit from the setup menu, press SETUP.
Operating multiple functions at once (macro)The macro function allows you to sequentially...

En134
 Before programming macro operations, you need to set the remote control codes (p.129) or assign a function to each key using the learning function (p.131).
 We do not recommend including continuous operations (such as volume  adjustment) in macro operations.1
Press SETUP.Perform each of the following steps within 30 seconds.
Otherwise, the setting will be canceled. In this case, repeat 
from step 1.
2
Use the cursor keys ( / ) to select “MACRO” and 
press ENTER.
3
Use the cursor keys ( / ) to...

En135
3
Use the cursor keys ( / ) to select the settings to 
be cleared and press ENTER.“ALL” appears in the display window.
To apply the selection to all the corresponding keys, 
proceed to step 5.
To apply the selection to a specific key, proceed to step 4. When “RESET” is selected, all remote control configurations will be cleared. You cannot select a specific key. Proceed to step 5.
4
Press a key to which the selected process is 
applied.When “LEARN” or “P RESET” is selected: press the 
input...

En136
1Remote control signal transmitterTransmits infrared signals.2NET/USBPress repeatedly to select a desired network source or 
“USB”.3SCENESelects the assigned input source, sound program, HDMI 
output and various settings  at once. Additionally, you can 
turn on this unit when it is in standby mode (p.58).4 INPUTSelects an input source.5ON SCREENDisplays the on-screen menu on the TV.6Menu operation keysCursor keys Select a menu or a parameter.
ENTER Confirms a selected item.
RETURN Returns to the...

En137
If this unit is connected to the Internet, the corresponding message 
will be displayed on the TV when a newer firmware is available. In 
this case, follow the procedure below to update the firmware of this 
unit. You can also update the firmware using the USB memory device from the “ADVANCED SETUP” menu (p.128).If the following message is displaye d after ON SCREEN is pressed, 
firmware update is available.1
Read the on-screen description.
2
To start the firmware update , use the cursor keys to...

En138
APPENDIXThe new speaker system does not provide an ideal sound 
balance...If you have changed speakers or speaker system, use “Auto Setup” to optimize the 
speaker settings again (p.47). If you want to  adjust the speaker settings manually, use 
“Manual Setup” in the “Setup” menu (p.109).Since we have small children, we want to set limitations on the 
volume control...If a small child, etc. accidentally operates  the controls on the main unit or remote 
control, the volume may suddenly increase....

En139
Refer to the table below when this unit does not function properly.
If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized 
Yamaha dealer or service center.First, check the followings:
a The power cables of this unit, TV and  playback devices (BD/DVD player, etc.)  are connected to AC outlets securely.
b This unit, subwoofer, TV and playback devi ces (BD/DVD player, etc.)...

En140
Audio
Problem
Cause
Remedy
No sound.
Another input source is selected. Select an appropriate input source with the input selection keys
Signals that this unit cannot reproduce are being input. Some digital audio formats cannot be played back on this unit. To check the 
audio format of the input signal, use “Audio Signal” in the “Information” menu 
(p.124).
The cable connecting this unit and playback device is defective. If there is no problem with the connection, replace with another cable.
The...