Yamaha Av1 Service Manual

En101
5
Use the cursor keys and ENTER to change the setting.
6
To exit from the menu, press ON SCREEN.
Scene menu items■ SaveRegisters the settings currently applied to this unit (input source, sound program, etc.) 
to the selected scene. If you have changed the input assignment for a scene, you also need to change the external device 
assigned to the corresponding SCENE key (p.59).
■  LoadLoads the settings registered to the selected scene.
Select “DETAIL” to configure the SCENE link playback setting,...

En102
❑ 
Detail
Selects items to be included as the scene as signments. You can also view the settings 
currently assigned to the selected scene.
To include items as the scene assignments,  use the cursor keys to select an item and 
press ENTER to check the box (or uncheck the box to exclude).
For example, if you often adjust the volume while watching TV but listen to radio with 
low volume at night, exclude “Volume” from the assignments for SCENE2 (TV) and 
include “Volume” in the assignments for SCENE4...

En103
You can change the settings of the sound programs and surround decoders using the 
TV screen.1
Press ON SCREEN.
2
Use the cursor keys to select “Sound Program” and press ENTER.
3
Use the cursor keys ( / ) to select a sound program to be 
configured and press the cursor key ( ). You can still switch the sound program by using cursor keys ( / ) after step 3.
4
Use the cursor keys ( / ) to select an item and press ENTER. To return to the previous screen during menu operations, press RETURN.
 To...

En104
Sound Program menu items Available items vary depending on the selected sound program or surround decoder.■ Settings for sound programs
The following items are available when you select “2ch Stereo” or “9ch Stereo”. Available items in “9ch Stereo” vary depending on the speaker system being used.
Item
Function
Settings
Decode Type Selects a surround decoder to be used 
in combination with the selected sound 
program. PLIIx Movie ( PLII 
Movie), Neo:6 Cinema
DSP Level Adjusts the sound field effect...

En105
■ Settings for decodersThe following items are available when you set “Decode Type” of “Surround Decoder” 
to “PLIIx Music” or “Neo:6 Music”.Decode Type
Item
Function
Settings
PLIIx Music Panorama
Adjusts the broadening 
effect of the front sound 
field. Off (default), On
Select “On” to wrap front right/left 
channel sounds around the field 
and generate a spacious sound 
field in combination with the 
surround sound field.
Center Width Adjusts the broadening 
effect of the center 
sound field. 0 ~...

En106
You can configure the various functions of this unit using the TV screen.1
Press ON SCREEN.
2
Use the cursor keys to select “Setup” and press ENTER.
3
Use the cursor keys ( / ) to select a menu.
4
Use the cursor keys
 (/) 
to select an item and press ENTER.
 To return to the previous screen during menu operations, press RETURN.
5
Use the cursor keys to select a setting and press ENTER.
6
To exit from the menu, press ON SCREEN.
Configuring various functions (Setup menu) 

En107
Setup menu itemsMenu
Item
Function
Page
Speaker Auto Setup
Optimizes the speaker settings automatically (YPAO). 47
Manual Setup Setting Pattern
Registers two speaker setting patterns and switches between them. 109
Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 109
Power Amp Assign Selects a speaker system. 109
Configuration Front
Selects the size of the front speakers. 110
Center Selects whether or not a center speaker is connected and its size. 110
Surround...

En108
NetworkIP Address
Configures the network parameters (IP address, etc). 118
Network Standby Selects whether or not to turn on this unit by the command from other network devices. 119
MAC Address Filter Sets the MAC address filter to limit access to this unit from other network devices. 119
Multi Zone Zone2 Set
Zone3 Set
Vo l u m e
Enables/disables volume adjustments for Zone2 or Zone3 output. 119
Max Volume Sets the Zone2 or Zone3 maximum volume so that sound is not too loud. 119
Initial Volume Sets...

En109
Speaker (Manual Setup)Configures the speaker settings manually.■ Setting PatternRegisters two speaker setting patterns and switches between them.
When you configure the following speaker settings, the settings will be memorized in 
the selected pattern.
- Measurement results (Auto Setup)
- Power Amp Assign
- Configuration
- Distance
- Level
- Parametric EQ
Settings
Pattern1 (default), Pattern2
 The setting pattern currently selected is shown at the top of the “Auto Setup” and “Manual Setup”...

En110
■ ConfigurationConfigures the output characteristics of the speakers. When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 
16 cm or larger or “Small” if it is smaller than 16 cm.❑  FrontSelects the size of the front speakers.
Settings
 “Front” is automatically set to “Large” when both “Subwoofer 1” and “Subwoofer 2” are set to “None”.❑ CenterSelects whether or not a center speaker is connected and its size.
Settings
❑ SurroundSelects whether or not surround...