Yamaha Av1 Service Manual

En
41
Connect the supplied FM/AM antennas to this unit.
Assembling and connecting the AM antenna
 Unwind the antenna cable from the AM antenna unit only the length needed.
 The wires of the AM antenna have no polarity.
4
Connecting the FM/AM antennas
SPEAKER IM
FM75ΩANTENNAAM(4 RADIO)
AV  1(1 BD/DVD)COAXIAL1DOCK
YP
BPR
YP
BPR
YP
BPR
OPTICAL
AV OUTAV  O U T /ZONE 4
RL
HDMI OUTARC1
112
2 HDMI(1 BD/DVD)
MONITOR OUT/
ZONE OUT
MONITOR OUT/ZONE OUT
IN OUT
2IN OU
T
AV  1
AV  1 AV  3
AV 2 AV 3 AV 4 AV 5 AV 6 AV...

En
42
Connect this unit to your router with a commercially-available STP network cable (CAT-5 
or higher straight cable).
You can enjoy Internet radio or music files  stored on PCs and DLNA servers such as 
Network Attached Storage (NAS) on this unit. When using a router that supports the DHCP function, the network parameters (IP address, etc.) will be  automatically assigned to this unit without configuring the network settings of this unit. If your router does 
not support the DHCP function or you want...

En
43
Connecting video/audio recording devicesYou can connect video/audio recording devices to the AV OUT jacks. These jacks 
output video/audio signals selected as the input. The AV OUT jacks cannot output video/audio signals input through the HDMI or COMPONENT VIDEO jacks.
Connecting a device with analog multi-channel outputYou can connect an analog multi-channel output de vice such as a DVD player and an 
SACD player to the MULTI CH INPUT jacks.
If you select “MULTI CH” as the input source by pressing...

En
44
Connecting a device compatible with SCENE link playback (remote connection)If you have a Yamaha product that has the capability of the SCENE control signal 
transmission, you can control the Yamaha product in conjunction with a scene selection 
(p.58) by connecting it to one of the REMOTE (OUT) jacks with a monaural mini-jack 
cable. If you connect a Yamaha product compatible with SCENE link playback to one of the REMOTE (OUT)  jacks, you can start playback on the Yamaha product in conjunction with...

En
45
After all the connections are complete, connect the supplied power cable to this unit 
and then to an AC wall outlet.
7
Connecting the power cable
Before connecting the power cable (General model only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage. 
Voltages are AC 110-120/220-240 V, 50/60 Hz. Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC  wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to this unit and...

En
46
Select a desired on-screen menu language from English (default), 
Japanese, French, German, Spanish and Russian.1
Press RECEIVER   to turn on this unit.
2
Turn on the TV and switch the TV input to display 
the video from this unit.
3
Press ON SCREEN.
4
Use the cursor keys to select “Setup” and press 
ENTER.
5
Use the cursor keys ( / ) to select “Language” and 
the cursor keys ( / ) to select a desired language.
6
To exit from the menu, press ON SCREEN. The information on the front display is...

En
47
By using the Yamaha Parametric room Acoustic Optimizer (YPAO) 
function, this unit automatically detects speaker connections and 
distances from the listening posi tion, and optimizes the speaker 
settings such as volume balance and acoustic parameters to suit 
your room.Please note the following when using YPAO.
 Use YPAO after connecting a TV and speakers to this unit.
 During the measuring process, the test tones are output at high volume. Take care  that the test tone does not frighten small...

En
48
The following screen appears on the TV. To cancel the operation, disconnect the YPAO microphone before starting the measurement.
6
If desired, select  the measuring options.aUse the cursor keys to select “Multi Position” (p.48) or “Angle” 
(p.49) and press ENTER.
b Use the cursor keys to select a setting and then press ENTER.
Now all preparations are complete. See the following page to start 
the measurement.
When “Multi Position” is set to “Yes”:
“Measuring at multiple listening  positions (multi...

En
49
❑ 
Angle
Enables/disables the angle measurement.
Settings
Single measure
1
2
3
4
11
3
5
24
1
23
45Multi measure(5 listening positions)Multi measure
(2 listening positions + front/back)
Multi measure
(1 listening position + 4 circumferences)
Ye s Enables the angle measurement. This unit will 
measure the angle of each speaker and correct the 
speaker parameters so that CINEMA DSP can create 
more effective sound fields.
No (default) Disables the angle measurement. 
1
2
3
4
5
6
7
8
9Automatic speaker...

En
50
Measuring at one listening position (single measure)When “Multi Position” is set to “No”, follow the procedure below to 
make the measurement. YPAO measurement is not performed correctly when any obstacles are in the room.
 During the measuring process (about 5 minutes), keep stuff in the corners or  remove it from the room.
 If any error message (such as E-1) or warning message (such as W-1) appears,  see “Error messages” (p.55) or “Warning messages” (p.56).1
To start the measurement,  use the...