Yamaha Av1 Service Manual

En
21
Advanced speaker configurationIn addition to the basic speaker configuration (p.16), this unit also allows you to apply the following speaker configurations  to enhance your system.
Using the four internal 
amplifiers for front speakers to 
have more high-quality sounds
(Example) (Example)(Example)
Bi-amp 
connection
Combining with an external 
power amplifier (Hi-Fi 
amplifier, etc.) to build an  extended system Using the excess internal 
amplifiers for stereo speakers  in another room
External...

En
22
■ Available speaker configurations When applying one of these configurations, you need to configure the “Power Amp Assign” setting (p.109) 
in the “Setup” menu.
 When applying a multi-zone configuration, you can select a zone (Zone2 or Zone3) to be assigned to the  EXTRA SP1~2 jacks in “Power Amp Assign” (p.109) in the “Setup” menu. By default, Zone2 is assigned to 
the EXTRA SP1 jacks and Zone3 is assigned to the EXTRA SP2 jacks. The following explanation is based 
on the default zone...

En
23
❑ 
7ch BI-AMP +FP ❑ 7ch BI-AMP +FP+RP
Bi-amp
via external amp
via external amp
 When this configuration is applied, you cannot utilize the ZONE OUT/PRE OUT jacks for connecting an  external amplifier for Zone2 (p.86).
Speaker
Connect to
  FRONT and EXTRA SP1 (bi-amp connection)
CENTER
 SURROUND
 SURROUND  BACK
  F.PRESENCE (PRE OUT) via external power amplifier
 (not  used)
SUBWOOFER 1~2
Bi-amp
via external amp
via external amp
via external amp
via external amp
 When this configuration is applied,...

En
24
❑ 
9ch +RP ❑ 9ch +FRONT
via external amp
via external amp
 When this configuration is applied, you cannot utilize the ZONE OUT/PRE OUT jacks for connecting an  external amplifier for Zone3 (p.86).
Speaker
Connect to
 FRONT
CENTER
 SURROUND
 SURROUND BACK
 EXTRA SP1
  R.PRESENCE (PRE OUT) via external power amplifier SUBWOOFER 1~2
via external amp
 When this configuration is applied, you cannot utilize the ZONE OUT/PRE OUT jacks for connecting an  external amplifier for Zone3 (p.86).
Speaker
Connect...

En
25
❑ 
7ch +FP+RP ❑ 7ch +FRONT+1ZONE
via external amp
via external amp
via external amp
via external amp
 When this configuration is applied, you cannot utilize the ZONE OUT/PRE OUT jacks for connecting  external amplifiers for Zone2 and Zone3 (p.86).
Speaker
Connect to
 FRONT
CENTER
 SURROUND
 SURROUND BACK
  F.PRESENCE (PRE OUT) via external power amplifier
  R.PRESENCE (PRE OUT) via external power amplifier SUBWOOFER 1~2
via external amp
Main zone Zone3
Speaker
Connect to
  FRONT (PRE OUT) via...

En
26
❑ 
5ch +FRONT+2ZONE ❑ 7ch +1ZONE
Zone2
Zone3
Main zone
via external amp
Speaker
Connect to
  FRONT (PRE OUT) via external power amplifier
CENTER
 SURROUND
 SURROUND  BACK
 (not  used)
 (not  used)
SUBWOOFER 1~2
Zone2 speakers EXTRA SP1
Zone3 speakers EXTRA SP2
Main zone Zone2
Speaker
Connect to
 FRONT
CENTER
 SURROUND
 SURROUND BACK
 (not used)
 (not used) SUBWOOFER 1~2
Zone2 speakers EXTRA SP1
1Speaker connections
2
3
4
5
6
7
8
9 

En
27
❑ 
9ch +1ZONE ❑ 7ch +2ZONE
Main zone Zone3
 When Zone3 output is enabled (p.89), the surround back speakers in the main zone do not output sound.
Speaker
Connect to
 FRONT
CENTER
 SURROUND
 SURROUND BACK
 EXTRA SP1
 (not used) SUBWOOFER 1~2
Zone3 speakers EXTRA SP2
Zone2
Zone3
Main zone
 When Zone3 output is enabled (p.89), the surround back speakers in the main zone do not output sound.
Speaker
Connect to
 FRONT
CENTER
 SURROUND
 SURROUND BACK
 (not used)
 (not used) SUBWOOFER 1~2
Zone2 speakers...

En
28
■ 
Connecting front speakers that support bi-amp connections
When using front speakers that support bi-amp connections, connect them to the 
FRONT jacks and EXTRA SP1 jacks.
To enable the bi-amp function, configure the “Power Amp Assign” setting (p.109) in the 
“Setup” menu after connecting the power cable to an AC wall outlet.
■ Connecting Zone2/3 speakersWhen using Zone2/3 speakers, connect them to the EXTRA SP1~2 jacks.
To utilize the EXTRA SP1~2 jacks for Z one2/3 speakers, configure the “Power...

En
29
■ Connecting an external power amplifierWhen using an external power amplifier to enhance speaker output, connect the input 
jacks of the power amplifier to the PRE OUT  jacks of this unit. The same channel signals 
are output from the PRE OUT jacks as fr om their corresponding SPEAKERS terminals.
1 F.PRESENCE jacksOutput front presence channel audio signals or  Zone2 audio signals depending on the “Power 
Amp Assign” setting (p.109).2 R.PRESENCE jacksOutput rear presence channel audio signals or...

En
30
■ Video/audio jacks❑  HDMI jacksTransmit digital video and digi tal sound through a single 
jack. Use an HDMI cable. Use a 19-pin HDMI cable with the HDMI logo. We recommend using  a cable less than 5.0 m long to prevent signal quality degradation.
 To connect a device that has a DVI jack, an HDMI/DVI-D cable is  required.
 The HDMI jacks of this unit support the HDMI Control, Audio Return  Channel (ARC), and 3D video transmission (through output) 
features.
■  Video jacks❑  COMPONENT VIDEO...