Xerox WorkCentre 7775 User Manual

Maintenance
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide 161
Installing Staples
If your printer has the optional Advanced Finisher, the optional Professional Finisher, the optional Light 
Production Finisher, you will be alerted by a message on the printer touch screen when a staple 
cartridge is empty and needs to be replaced.
This section includes:
•Main Staple Replacement for Advanced Office Finisher and Professional Finisher on page 161
•Booklet Staple Replacement for Professional...

Maintenance
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide162
3. Remove the staple cartridge by gripping the orange handle at the front of the cartridge and pulling 
it firmly toward you.
4. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
5. Insert the front side of the new staple case into the staple cartridge (1), then push the rear side into 
the cartridge (2).
wc77xx-099
1
1
2
wc77xx-136
1
2
wc77xx-137
Downloaded From ManualsPrinter.com Manuals 

Maintenance
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide 163
6. Grip the staple cartridge by the orange handle and insert it into the staple cartridge unit until it clicks.
7. Close the finisher door.
Booklet Staple Replacement for Professional Finisher and Light Production 
Finisher
Note:The booklet maker uses two staple cartridges labeled R2 and R3. Booklet stapling requires 
that both staple cartridges contain staples.
Wa rni n g:Do not perform this procedure when the printer is copying...

Maintenance
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide164
2. While squeezing orange levers R2 and R3 together (1), pull the staple cartridge unit out of the 
finisher until it stops (2).
Note:The staple cartridge unit does not detach from the finisher.
3. Grip the orange tabs on both sides of staple cartridge R2.
4. While gripping the orange tabs of the staple cartridge, rotate it in the direction shown.
wc77xx-104
12
wc77xx-105
wc77xx-106
Downloaded From ManualsPrinter.com Manuals 

Maintenance
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide 165
5. Lift the staple cartridge out of the staple cartridge unit.
6. Push the new staple cartridge into the staple cartridge unit until it clicks.
7. Repeat steps 3 to 6 for staple cartridge R3.
8. Return the staple cartridge unit to its original position.
9. Close the finisher door.
wc77xx-107
wc77xx-109
wc77xx-110
Downloaded From ManualsPrinter.com Manuals 

Maintenance
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide166
Main Staple Replacement for Light Production Finisher
Wa rni n g:Do not perform this procedure when the printer is copying or printing.
1. Open the right finisher door.
2. Grip the staple cartridge by the orange handle and remove it by pulling it firmly toward you.
3. Remove the staple case from the staple cartridge.
wc77xx-140
wc77xx-141
wc77xx-142
Downloaded From ManualsPrinter.com Manuals 

Maintenance
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide 167
4. Insert the new staple case into the staple cartridge.
5. Grip the staple cartridge by the orange handle and insert it into the staple cartridge unit until it clicks.
6. Close the right finisher door.
wc77xx-143
wc77xx-144
wc77xx-145
Downloaded From ManualsPrinter.com Manuals 

9
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide168
Troubleshooting
This chapter includes:
•Control Panel Messages on page 169
•General Troubleshooting on page 170
•Clearing Paper Jams on page 173
•Clearing Staple Jams on page 214
•Print Quality Problems on page 225
•Copy and Scan Problems on page 226
•Fa x  Pr o b l e m s  on page 227
•Getting Help on page 230
Downloaded From ManualsPrinter.com Manuals 

Troubleshooting
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide 169
Control Panel Messages
The control panel touch screen provides information and troubleshooting help. When an error or 
warning condition occurs, the touch screen displays a message. The touch screen may also display an 
animated graphic showing the location of the problem, such as the location of a paper jam.
Problems which prevent the full operation of the printer have associated fault codes. These codes will 
help pinpoint...

Troubleshooting
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide170
General Troubleshooting
This section contains procedures to help you locate and resolve problems. Some problems can be 
resolved by simply restarting the printer.
To restart the printer:
1. Locate the power switch on the top of the printer.
2. Turn the switch OFF, wait 2 minutes, then turn the switch back ON.
If the problem is not resolved by restarting the printer, see the table in this chapter that best describes 
the...