Xerox Workcentre 24 Pcl 6 Manual

1–39
USER GUIDE (COPIER)
2 Sided
Use the 2 Sided feature to select one or two-sided originals, with 
options for one or two-sided output.
The following options are available:
1 to 1 SidedMakes one-sided copies from one-sided input.  This is the default 
setting.
1 to 2 SidedMakes two-sided copies from one-sided input.
2 to 2 SidedMakes two-sided copies from two-sided input.
2 to 1 SidedMakes one-sided copies from two-sided input.
NOTE: Some options are not available without a DADF. 

1–40
USER GUIDE (COPIER)
You can select several 2 Sided options from the Basic Copying tab 
or the Added Features tab. 
1On the Added Features tab select 2 Sided. 
2Select the desired option: 
•1 to 1 Sided 
•1 to 2 Sided 
•Select Head to Head for two-sided, head-to-head output, 
as for books.
•Select Head to Toe for two-sided, head-to-toe output, as 
for calendars. 

1–41
USER GUIDE (COPIER)
•2 to 2 Sided 
Select the option for your Originals
•Head to Head if your originals are two-sided, head-to-
head.
•Head to Toe if your originals are two-sided, head-to-toe.
Select the option for your Copies
•Head to Head for two-sided, head-to-head output, as for 
books.
•Head to Toe for two-sided, head-to-toe output, as for 
calendars.
• 2 to 1 Sided 
•Select Head to Head if your originals are two-sided, head-
to-head.
•Select Head to Toe if your originals are two-sided, head-...

1–42
USER GUIDE (COPIER)
Output
The Output feature enables you to select the destination of the 
output and determine whether it will be collated or uncollated.
The following options are available:
AutoThe copier automatically determines which output mode (collated 
or uncollated) for the job and delivers the copies to the output tray.
CollatedCollated sets are delivered to the output tray.
UncollatedUncollated sets are delivered to the output tray.
Collated refers to copies that are delivered as sets....

1–43
USER GUIDE (COPIER)
1On the Added Features tab select Output.
2Select the desired option: 
•Auto
• Collated
• Uncollated
3If you have a Finisher (optional accessory), select the desired 
Output Destination:
• Center Output Tray
• Finisher Tray
4Select Start to make copies or Save to select additional features.  

1–44
USER GUIDE (COPIER)
Stapling
This section describes the procedure for programming the Output 
feature to staple output. You must have a Finisher (optional 
accessory) to staple output.
1On the Added Features tab select Output.
2Select Collated/Stapling.
3Select Stapling. The Stapling screen is displayed.
4Select the desired stapling position.
The Finisher Tray is automatically selected as the Output 
Destination.
5Select the desired Original Orientation:
• Head to Top
• Head to Left
Select Save....

1–45
USER GUIDE (COPIER)
Margin Shift
The Margin Shift feature allows you to shift the position of the 
image on the copy.  The image can be centered on the copy or 
moved to the top, bottom, left or right.  When copying both sides, 
different settings can be set for Side 1 and Side 2.
The following types of Margin Shift are available:
No ShiftCopies are made without shifting the original.  This is the default 
setting.
Auto CenterSelect this to center an image on the copy when the original and 
copy...

1–46
USER GUIDE (COPIER)
Using the Auto Center Feature
1On the Added Features tab select Margin Shift.
2Select Auto Center. 
3Select Start to make copies or Save to select additional features.  

1–47
USER GUIDE (COPIER)
Using the Margin Shift/Variable Shift Feature
1On the Added Features tab select Margin Shift.
2Select Margin Shift/Variable Shift.
3Select the desired option:
• Side 1
• Side 2
4Select the desired shift option: 
•No Shift 
•Auto Center 
•Corner Shift 
• Press the arrow icon that illustrates the desired location of 
the image on the output copy.
• Variable Shift
• Press the left arrow to shift the image toward the left edge.  
Press the right arrow to shift the image toward the...

1–48
USER GUIDE (COPIER)
Border Erase
The Border Erase feature enables you to eliminate unwanted 
marks near the edges of the original from the output copy.  The 
range for Border Erase is 0 through 50mm in 1mm increments. 
Border Erase options can be used individually or combined 
together:
Top & BottomFor Normal the default is 2mm. For Variable Erase the default is 
5mm.
Left & RightFor Normal the default is 2mm. For Variable Erase the default is 
5mm.
CenterThe default is 0mm.
The selected settings...