Xerox Workcentre 24 Pcl 6 Manual

1–19
USER GUIDE (COPIER)
Loading Stock
Paper
Load the paper into Trays 1, 2, 3, and 4 with the preferred printing 
side up. 
Load the paper into Tray 5 (Bypass) with the preferred printing 
side down. 
The capacity of the tray varies with the paper weight that is loaded 
in the tray. 
NOTE: For the best results, use only the recommended paper 
sizes, paper weights, or paper types. If you do not use 
recommended papers, you may experience copy quality 
problems, paper jams, or possible component...

1–20
USER GUIDE (COPIER)
NOTE: Do not load paper above the fill line of the paper tray edge 
guides.
NOTE: Fan the desired paper before loading it into the Tray.
Straighten the paper stack each time the paper tray is opened. 
Close the paper tray slowly to avoid shifting the paper stack. This 
ensures that the paper is in the correct position when the paper 
tray is in the operating position.
If paper feeding or copy curl problems occur, flip the paper over in 
the tray and make the copies again. If the...

1–21
USER GUIDE (COPIER)
Transparencies
Transparencies can only be fed from Tray 5 (Bypass). Stripeless 
transparencies are recommended. Striped transparencies must be 
loaded with the stripe face up, on the left side of the tray.
NOTE: Use only the transparencies recommended in the 
Recommended Materials for the WorkCentre 24. 
After loading the transparencies you can program the copier 
printer to insert a blank separator page between transparencies by 
using the Transparency Separators feature. 
For...

1–22
USER GUIDE (COPIER)
Loading Paper into Trays 1, 2, 3, and 4
1To load a paper tray, pull the tray out.
2Fan the paper and load the desired paper into the tray by aligning 
the edge of the paper against the left edge of the tray. The side to 
be copied should be facing up.
Do not fill the paper tray above the fill line.
3Adjust the paper guides if necessary, until they lightly touch the 
paper.
4Push the tray in gently until it comes to a stop.
Loading Stock into Tray 5 (Bypass)
The number of sheets...

1–23
USER GUIDE (COPIER)
3Fan the paper and load paper with the side to be copied or printed 
on facing down. Insert the paper lightly along the paper guide on 
the front side of the machine until it comes to a stop.
4Adjust the back edge paper guide until it lightly touches the paper.
NOTE: Do not load mixed size paper into the tray. Do not load 
materials above the fill line located on the paper guide
5Select the appropriate size and type for the paper you have 
loaded.
6Remove all stock from Tray 5...

1–24
USER GUIDE (COPIER)
Loading SRA3 Paper into Tray 5 (Bypass)
1Open Tray 5 (Bypass) by grasping the tray and gently pushing it 
away and down from the printer/copier. 
2Adjust the front edge paper guide to the closest position forward 
beyond the 12x18 in. position.
3Load the SRA3 paper into Tray 5 (Bypass). Load the paper with 
the side to be printed on facing down.
4Adjust the back edge guide until it lightly touches the paper.
NOTE: SRA3 paper is not recommended for copy jobs. 
Performance using...

1–25
USER GUIDE (COPIER)
Copier Features
Basic Copying Tab
Below is a brief description of each feature available on the Basic 
Copying tab.  Each feature is explained in detail on the following 
pages.
Output ColorAllows you to select the colors to be used for copying.
2 SidedAllows you to select one or two-sided originals, with options for 
one or two-sided output. 
Reduce/EnlargeAllows you to select the size of the output image from automatic 
reduction/enlargement, preset values, or variable...

1–26
USER GUIDE (COPIER)
Output Color
The Output Color feature allows you to select the desired output 
color.
The following options are available:
AutoThe Auto Color option enables the copier to determine if the 
document is black and white or color.  If the document is black and 
white, the Black option is selected automatically.  If the document 
is colored, the Full Color option is selected.
The DADF must be closed for the Auto Color option to function. In 
order for the scanner to accurately sense...

1–27
USER GUIDE (COPIER)
You can select several Output Color options from the Basic 
Copying tab or select the More… button to get a complete set of 
options.
1On the Basic Copying tab select More… under Output Color to 
display the Output Color screen. 
2Select the desired option:
•Auto
• Full Color
• Black
• Dual Color
•Single Color 
3Select Start to make copies or Save to select additional features. 
NOTE: Dual Color cannot be used with Negative Image.
NOTE: When Single Color or Dual Color is...

1–28
USER GUIDE (COPIER)
2 Sided
Use the 2-Sided feature to select one or two-sided originals, with 
options for one or two-sided output.
The following options are available:
1 to 1 SidedMakes one-sided copies from one-sided input.  This is the default 
setting.
1 to 2 SidedMakes two-sided copies from one-sided input.
2 to 2 SidedMakes two-sided copies from two-sided input.
2 to 1 SidedMakes one-sided copies from two-sided input.
NOTE: Some options are not available without a DADF.