Xerox Workcentre 24 Pcl 6 Manual

1–59
USER GUIDE (COPIER)
Output Format Tab
Below is a brief description of each feature available on the Output 
Format tab.  Each feature is explained in detail on the following 
pages.
Multiple UpAllows you to copy 2 or 4 images from multiple originals onto a 
single page.
Transparency SeparatorsAllows you to insert blank paper separators between 
transparencies.  Also copy sets can be made in conjunction with 
the transparencies.
CoversAllows you to add covers to your copied sets using paper drawn...

1–60
USER GUIDE (COPIER)
Multiple Up
The Multiple Up feature enables you to copy 2 or 4 images from 
multiple originals onto a single page.
NOTE:When using this feature place the originals in the DADF.
NOTE:Depending on the size of the original, some image loss 
might occur along the edge of the image.
The following options are available:
1 UpCopies one image on each output copy.
2 UpCopies two images on each output copy.
4 UpCopies four images on each output copy.
NOTE: This feature is not available...

1–61
USER GUIDE (COPIER)
1On the Output Format tab select Multiple Up.
2Select the desired option: 
•1 Up 
•2 Up 
Select the desired Image Order:
• Left to Right
• Right to Left
• Top to Bottom 

1–62
USER GUIDE (COPIER)
•4 Up 
Select the desired Image Order:
• Horizontally from the upper left corner
• Horizontally from the upper right corner
• Vertically from the upper left corner
• Vertically from the upper right corner
3Select the icon that most closely resembles the Original 
Orientation for the loaded documents.
4Select Start to make copies or Save to select additional features. 
NOTE:Multiple Up cannot be used with the following features: 
Auto Paper Tray Selection, Bound Originals, Book...

1–63
USER GUIDE (COPIER)
Transparency Separators
When the Transparency Separators feature is used, the copier 
automatically inserts a blank sheet of paper between the 
transparency copies.  In addition to the transparency set, you may 
also select copy sets.
The following options are available:
OffCopies are made without transparency separators.
Blank SeparatorsA blank sheet of paper is inserted between every transparency.  
Only one set can be made.
Separators + N SetsA blank sheet of paper is inserted...

1–64
USER GUIDE (COPIER)
Selecting Blank Separators
1On the Output Format tab select Transparency Separators.
2Select Blank Separators.
3Select Paper Tray Settings.
4Select the size/orientation of the transparencies loaded in Tray 5 
(Bypass).
5Select the paper tray to use for the Blank Separators.
6Select Start to make copies or Save to select additional features. 

1–65
USER GUIDE (COPIER)
Selecting Separators + N Sets
1On the Output Format tab select Transparency Separators.
2Select Separators + N Sets.
3Select Paper Tray Settings.
4Select the size/orientation of the transparencies loaded in Paper 
Tray 5.
5Select the paper tray to use for the Separators and N sets.
6Select Save.
7Select Start to make copies or Save to select additional features.
NOTE:Transparency Separators cannot be used with the following 
features: Uncollated, Reduce/Enlarge, Covers, Booklet...

1–66
USER GUIDE (COPIER)
Covers
This feature allows you to add covers to your copied sets, using 
paper drawn from a different tray than your copies.  You can have 
blank or printed covers.  
The following options are available:
No CoversNo Covers are added to the copy set.  This is the default setting.
Front CoversA Front Cover is added to the copy set with or without an image.
Front & Back CoversA Front & Back Cover is added to the copy set with or without an 
image.
To copy an image on only one side...

1–67
USER GUIDE (COPIER)
1On the Output Format tab select Covers.
2Select the desired option: 
• No Covers
• Front Covers
• Front & Back Covers
3If you selected Front Covers or Front & Back Covers, select the 
desired Printed Covers option.
4Select Paper Tray Settings.
5Select the correct paper tray for the Body Pages and Covers.
6Select Save.
7Select Start to make copies or Save to select additional features.
NOTE:Covers cannot be used with the following features: 
Uncollated, Repeat Image, Poster,...

1–68
USER GUIDE (COPIER)
Repeat Image
The Repeat Image feature enables you to copy a single image 
multiple times onto one page.
The following options are available:
OffThis is the default setting, which produces only one image per 
output page. 
Auto RepeatThis option enables the copier to automatically determine the 
number of output images that will fit on a single page.
Variable RepeatWith this option you can specify the number of images that will 
print on a single sheet by selecting the number of...