Xerox Workcentre 24 Pcl 6 Manual

1–29
USER GUIDE (COPIER)
You can select several 2 Sided options from the Basic Copying tab 
or use the Added Features tab. 
1On the Basic Copying tab select More… under 2 Sided.
2Select the desired option: 
•1 to 1 Sided 
•1 to 2 Sided 
•Select Head to Head for two-sided, head-to-head output, 
as for books.
•Select Head to Toe for two-sided, head-to-toe output, as 
for calendars. 

1–30
USER GUIDE (COPIER)
•2 to 2 Sided 
Select the option for your Originals
•Head to Head if your originals are two-sided, head-to-
head.
•Head to Toe if your originals are two-sided, head-to-toe.
Select the option for your Copies
•Head to Head for two-sided, head-to-head output, as for 
books.
•Head to Toe for two-sided, head-to-toe output, as for 
calendars.
• 2 to 1 Sided 
•Select Head to Head if your originals are two-sided, head-
to-head.
•Select Head to Toe if your originals are two-sided, head-...

1–31
USER GUIDE (COPIER)
Reduce/Enlarge
The Reduce/Enlarge feature allows you to copy the image at 
different magnifications. Copies may be reduced to 25% or 
enlarged to 400%, in 1% increments.
The following options are available:
100%Copies are the same size as the original. This is the default 
setting.
Auto%This option automatically reduces or enlarges the copy, based on 
the size and orientation of the document and the paper supply 
selected. This option is applied only to standard size documents....

1–32
USER GUIDE (COPIER)
Va r i a b l e %Select the Variable% option to enter the desired percentage for 
Reduce/Enlarge. Use either the up and down arrows or the 
number buttons that display on the Touch Screen. 
Independent X-Y%Select the Independent X-Y% option to copy the image at 
different, independent magnifications from 25% to 400% for the X 
and Y directions.
For example, you can enlarge the image to 129% in the X 
direction and reduce it to 64% in the Y direction by using the 
Touch Screen...

1–33
USER GUIDE (COPIER)
Using Variable%
1Under Reduce/Enlarge on the Basic Copying tab select More… 
2On the Reduce/Enlarge screen, select the Variable% option. 
3Perform one of the following: 
• Press the arrow buttons to increase or decrease the 
percentage value in increments of 1. 
• Use the Numeric Keypad on the Touch Screen to enter a 
specific percentage from 25 through 400.  Press the Clear (C) 
button to clear the value entered. 
4Select Start to make copies or Save to select additional...

1–34
USER GUIDE (COPIER)
Using Independent X-Y%
1Under Reduce/Enlarge on the Basic Copying tab select More… 
2On the Reduce/Enlarge screen, select the Independent X-Y% 
option. 
3Perform one of the following: 
• Press the up arrow to increase the percentage value for X, 
X&Y, or Y in increments of 1. 
• Press the down arrow to decrease the percentage value for X, 
X&Y or Y in decrements of 1. 
•Press Auto.
4Select Start to make copies or Save to select additional features.    

1–35
USER GUIDE (COPIER)
Paper Supply
The Paper Supply option enables you to select output paper size 
and type.
The Basic Copying tab displays the Auto Paper selection feature. 
This option enables the copier to automatically detect the original 
document size and select the same standard size paper from 
Trays 1,2, 3, or 4.
The Basic Copying tab also displays the contents of three other 
trays enabling you to specify your selection for output size. The 
Paper Supply More… button enables you to access...

1–36
USER GUIDE (COPIER)
Programming the Paper Supply for Tray 5 (Bypass)
You must select the paper size and paper type when loading 
paper into Tray 5 (Bypass).  Auto Size Detect can be used with 
standard size paper. 
1On the Basic Copying tab select More… under Paper Supply.
2Select Tray 5 (Bypass) to display the Tray 5 (Bypass) screen.
3Perform one of the following to select Paper Size: 
•Select Auto Size Detect. 
•Select Standard Size. 
• Select the paper size from the list. Use the up and down...

1–37
USER GUIDE (COPIER)
4Select the appropriate Paper Type using the up and down arrow 
buttons. You can select Plain, Bond, Recycled, Transparency, and 
Lightweight - Extra Heavyweight paper.
5Select Save to return to the Paper Supply screen.
6Select Start to make copies or Save to select additional features. 
NOTE:Paper Tray 5 cannot be used with the following features: 
Auto Size Detect with 1 to 2-Sided and 2 to 2-Sided, Auto 
Reduction/Enlargement, Auto Center, Corner Shift, Negative 
Image, Mirror...

1–38
USER GUIDE (COPIER)
Added Features Tab
Below is a brief description of each feature available on the Added 
Features tab.  Each feature is explained in detail on the following 
pages.
2 SidedAllows you to select one or two-sided originals, with options for 
one or two-sided output. 
OutputEnables you to select the desired output order and destination of 
the output.
Margin ShiftEnables you to center a document image, shift the image to one 
edge or move the image to a specified edge of the output...