Xerox Document Centre 545DC HCF User Manual

Copy Service Settings
139
Tools
5
Lighten/Darken
Set the default value for [Lighten/Darken] of [Image Options] in the [Image Quality] screen.
Sharpness
Set the default value for [Sharpness] of [Image Options] in the [Image Quality] screen.
Background Suppression
Set the default value for [Suppress Background]  of [Background Suppression] in the [Image 
Quality] screen.
[Background Suppression] is valid when [Original Type] is set to [Photo & Text], [Text], [Light 
Text], or [Text on See-Through Paper].
2...

5 Tools
140
Tools
5
Edge Erase - 2 Sided Original - Side 2
Set the default value for [2 Sided Original - Side 2] of [Edge Erase] in the [Layout Adjustment] 
screen.
Image Shift - Side 1
Set the default value for [Side 1] of [Image Shift] in the [Layout Adjustment] screen.
Image Shift - Side 2
Set the default value for [Side 2] of [Image Shift] in the [Layout Adjustment] screen.
Image Rotation
Set the default value for [Image Rotation] in the [Layout Adjustment] screen.
Image Rotation - Rotation...

Copy Service Settings
141
Tools
5
Annotations - Comment - Font Size
Set the default value for [Font Size] under [Format & Style] displayed when [Comment] is 
selected for [Annotations] in the [Output Format] screen.
Date - Position on Side 1 and Side 2
Set the default value for [Position] displayed when [Date Stamp] is selected for [Annotations] 
in the [Output Format] screen.
Date - Font Size
Set the default value for [Font Size] displayed when [Date Stamp] is selected for 
[Annotations] in the [Output...

5 Tools
142
Tools
5
Copy Control
You can configure settings related to copy operation control.
Memory Full Procedure
If there is insufficient hard disk memory while scanning a document, a screen appears asking 
you how you want to handle the partially stored data.
Set the process you want the machine to perform for the partially stored data after a certain 
time has elapsed in the confirmation screen.
You can set the time until the memory full procedure is carried out. For more information, refer to Auto...

Copy Service Settings
143
Tools
5
Pseudo-Photo Gradation Mode
You can select a gradation expression mode. Selecting this mode enables the machine to 
change the processing method for gray part (halftone) to achieve near-photo quality. Select 
either [Error Diffusion] or [Dither].
Original Type - See-Through Paper
When [Text] is selected for [Original Type] in the [Image Quality] screen, set whether or not to 
display [See-Through Paper].
Annotations - Comment Density
Set the translucency of the comment...

5 Tools
144
Tools
5
„OthersYou can select a size from other sizes.
„Custom Size You can enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to 
297 mm in 1 mm increments.
Reduce/Enlarge Presets
Set the magnifications displayed as [Preset %] which are displayed when [Proportional 
%] is selected under [Reduce/Enlarge] in the [Copy] screen.
You can assign any magnification to the Reduce/Enlarge Preset buttons other than 
[100%] and [Auto %].
Annotations - Create Comments...

Connectivity & Network Setup
145
Tools
5
Connectivity & Network Setup
In [Connectivity & Network Setup], you can configure settings related to the 
Connectivity & Network feature.
For information on Connectivity and Network Settings, refer to Printer Environment Settings (P.247) 
or E-mail Environment Settings (P.265).
If you use CentreWare Internet Services, more detailed settings are possible. For more information, refer 
to CentreWare Internet Services Settings (P.239).
The following shows the...

5 Tools
146
Tools
5
„Auto Eject TimeConfigure the time that the data so far receiv ed by the machine will automatically be printed 
since data is no longer sent to the printer.
You can enter a time between 5 and 1275 seconds in 5 seconds increments.
„Adobe Communication Protocol
zStandard
Select this when the output protocol of the print driver is in the ASCII format.
zBinary
Select this when the output protocol of the print driver is in the BCP format.
zTBCP
Select this when the output protocol of the...

Connectivity & Network Setup
147
Tools
5
Important •Do not use a number that is the same as a port number of another port. However, you can 
use the same port number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP 
Discovery, SOAP, WebDAV, and Web Services on Devices (WSD)).
Note • [Added Port Number] cannot be configured if [Port Status] is set to [Disabled].
To configure [Added Port Number], enable port status and reboot the machine, and then 
configure [Added Port Number].
EtherTalk...

5 Tools
148
Tools
5
Receive E-mail
„Port StatusSelect [Enabled] when you receive e-mails and Internet faxes.
Send E-mail
„Port StatusSelect [Enabled] when you send e-mails and Internet faxes.
E-mail Notification Service
„Port StatusSelect [Enabled] when you use the E-mail Noti fication Service. The E-mail Notification 
Service notifies you of the machine status or the completion of a print job, and a direct fax job 
by e-mail.
Note •[Consumables Status], [Parts Status], [Paper Tray Status], [Output Tray...