Xerox Document Centre 545DC HCF User Manual

Print Service Settings
169
Tools
5
Print Service Settings
In [Print Service Settings], you can configure settings related to the Print feature.
Using CentreWare Internet Services, you can make more detailed settings.
For more information, refer to CentreWare Internet Services Settings (P.239).
The following shows the reference section for each setting.
Allocate Memory...................................................................................................................... 169
Delete Form...

5 Tools
170
Tools
5
Note •The maximum amount of memory you can allocate varies according to the amount of free 
space available in memory.
Receiving Buffer - USB
Set the receiving buffer for USB.
You can specify a value from 64 to 1024 KB in 32 KB increments.
Receiving Buffer - LPD
Note •You may not be able to change the [Receiving Buffer - LPD] setting because of the setting of 
[LPD Print Queue]. For more information on LPD Print Queue, refer to LPD Print Queue 
(P.174).
„No Spooling
Does not use...

Print Service Settings
171
Tools
5
Receiving Buffer - EtherTalk
Set the EtherTalk receiving buffer.
Specify a value from 1024 to 2048 KB in 32 KB increments.
Receiving Buffer - Port 9100
Set the Port 9100 receiving buffer.
Specify a value from 64 to 1024 KB in 32 KB increments.
Delete Form
You can delete registered ESC/P-K forms.
1Select [Delete Form].
2Select the print mode to delete forms.
„ESC/PDeletes ESC/P-K emulation forms.
„Form Number When you select an item to delete, you can enter the form...

5 Tools
172
Tools
5
„Use Larger SizeSwitches to the next larger size of paper than previously selected and prints at the same 
magnification.
„Use Closest Size Switches to the closest size of paper to previously selected and prints. If necessary, the 
image is automatically reduced in size on the paper.
Note • If there is a client specification, the client specification is prioritized.
„Select Tray 5
Prints using the paper loaded in Tray 5.
Paper Type Mismatch
Set an action to take when the paper type...

Print Service Settings
173
Tools
5
„Delete JobThe machine cancels printing and removes the print job.
Note • For print files stored in a folder such as Charge Print, Private Charge Print, Secure Print, and 
Sample Print, the machine resumes printing after the paper jam is cleared.
Print User ID
When printing using a print driver, specify whether or  not to print user ID set in the print driver 
on paper. The first 64 letters of the user ID are printed.
Select a position to print from [Top Left], [Top...

5 Tools
174
Tools
5
PostScript Font Absence
Set an action to take when a PostScript font specified in a job is not present.
Note •This feature does not appear for some models. An optional component is required. For more 
information, contact our Customer Support Center.
„Cancel Printing
Cancels printing.
„Substitute Font and Print Prints using a substitute font. Courier is used as the substitute font.
PostScript Font Substitution
Set whether or not to use ATCx as a substitute if a PostScript font...

Scan Service Settings
175
Tools
5
Scan Service Settings
In [Scan Service Settings], you can configure settings related to the Scan services.
Note •This feature does not appear for some models. An optional component is required. For more 
information, contact our Customer Support Center.
• When [Scan to Fax Server] is selected in the System Settings, [Scan Service Settings] is 
replaced with [Scan/Fax Service Settings].
For information on scanner environment settings, refer to Scanner Environment Settings...

5 Tools
176
Tools
5
Scan Defaults
You can set the default settings of the Scan services. When the machine is turned on, 
or the machine exits the Energy Saver mode, or when the  button is 
pressed, the machine resets to the default values set here. Setting frequently used 
features and values as the defaults can avoid extra operations required during the use 
of the machine.
The values set here become valid after the machine turned off and then on.
For more information on each setting item, refer to 5...

Scan Service Settings
177
Tools
5
Important •When [Device Color Space] is selected as default and [Color Space] (P.180) is set to 
[Disabled], [Auto Detect] of [Color Scanning] in the First Tab does not appear. In addition, 
when the High Compression Image Kit (optional) is enabled, [MRC High Compression] 
under [File Format] is not displayed either.
Original Orientation
Set the default value for [Original Orientat ion] in the [Layout Adjustment] screen.
Resolution
Set the default value for [Resolution]...

5 Tools
178
Tools
5
Note •This feature does not appear for some models. An optional component is required. For more 
information, contact our Customer Support Center.
Searchable - Text Compression
Set whether or not to compress searchable text when using the OCR feature.
Note •This feature does not appear for some models. An optional component is required. For more 
information, contact our Customer Support Center.
Scan to PC Defaults
Transfer Protocol
Set the default value for the transfer protocol us...