Xerox ColorQube 8570DN User Manual

Maintenance
ColorQube 8570/8870 Color Printer
User Guide131
3. Empty the waste tray in a waste container. Twist the tray slightly to dislodge the waste ink. The ink 
is non-toxic and can be discarded as normal office waste.
Note:The waste tray must be out of the printer for more than five seconds or you will continue to 
receive an Empty Waste Tray message on the control panel.
4. Insert the waste tray into the printer and push it completely into the waste tray slot.
5. Close side door D.
CAUTION:Do not...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 132
Replacing the Maintenance Kit
The maintenance kit contains a maintenance roller that keeps the surface of the imaging drum clean 
and oiled.
Note:Order a new maintenance kit when the printer control panel displays a message that the 
maintenance kit is low. Replace the kit when the control panel prompts you to replace the it.
To order a replacement maintenance kit, contact your local reseller or go to the Xerox Supplies website 
for your...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide133
3. Insert the replacement maintenance kit and push it completely into the maintenance kit slot. 
Follow the illustrated instructions included with the maintenance kit for full installation and 
disposal information.
4. Close side door D.
8X70-038
Downloaded From ManualsPrinter.com Manuals 

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 134
Ordering Supplies
This section includes:
•Locating the Printer Serial Number on page 134
•Consumables on page 134
•Routine Maintenance Items on page 135
•Customer Replaceable Parts on page 135
•When to Order Supplies on page 135
•Recycling Supplies on page 136
Certain consumables and routine maintenance items need to be ordered occasionally. Each item 
includes installation instructions in the package.
Locating the Printer Serial Number
When...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide135
Routine Maintenance Items
Routine maintenance items are printer parts that have a limited life and require periodic replacement. 
Replacements may be parts or kits. Routine maintenance items are typically customer replaceable.
The maintenance kit is the only routine maintenance item for the ColorQube 8570/8870 printer. To 
order a replacement maintenance kit, contact your local reseller or go to the Xerox Supplies website for 
your printer:
•...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 136
Recycling Supplies
For information on Xerox supplies recycling programs, go to:
• ColorQube 8570 printer: www.xerox.com/gwa
• ColorQube 8870 printer: www.xerox.com/gwa
Downloaded From ManualsPrinter.com Manuals 

Maintenance
ColorQube 8570/8870 Color Printer
User Guide137
Moving and Repacking the Printer
This section includes:
•Precautions for Moving the Printer on page 137
•Moving the Printer Within the Office on page 138
•Preparing the Printer for Shipping on page 139
CAUTION:Parts of the printer are hot. To avoid damage to the printer, allow the ink to solidify 
and the printhead to cool. To cool the printer quickly, run the Shutdown for Moving Printer 
procedure on the printer control panel. The Shutdown for...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 138
Moving the Printer Within the Office
To move the printer within the office:
1. Close the printer doors.
2. Turn off the printer using the power switch located behind I/O door E on the rear right side of the 
printer.
3. Within 10 seconds after turning off the printer, select either Standard Shutdown or Shutdown 
for Moving Printer on the printer control panel and then press OK.
4. Wait for the printer to complete the cool-down period for the...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide139
Preparing the Printer for Shipping
This section includes:
•Removing the Maintenance Kit and Waste Tray on page 139
•Turning Off the Printer on page 141
•Packing the Printer on page 141
Before shipping the printer:
1. Remove the maintenance kit and waste tray.
2. Turn off the printer.
3. Pack the printer.
Removing the Maintenance Kit and Waste Tray
Before turning off the printer, remove the maintenance kit and waste tray:
1. Open side door D.
2....

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 140
3. Remove the waste tray (labeled B) from the waste tray slot.
WARNING:The waste tray may be hot; handle it carefully.
4. Empty the waste ink. Slightly twist the tray to dislodge the ink. Place the tray in a plastic bag for 
storage.
CAUTION:Shipping the printer with the maintenance kit and waste tray installed can damage 
the printer.
5. Close the printer doors.
8X70-035
8X70-036
Downloaded From ManualsPrinter.com Manuals