Xerox ColorQube 8570DN User Manual

Maintenance
ColorQube 8570/8870 Color Printer
User Guide121
Cleaning the Printer
This section includes:
•Cleaning the Printer Exterior on page 121
•Cleaning the Paper Release Blade on page 121
•Cleaning the Feed Rollers on page 123
Cleaning the Printer Exterior
WARNING:To prevent electric shock, turn the printer off and unplug the power cord from the 
electrical outlet before cleaning the printer.
To remove stains, clean the outside of the printer using a soft cloth moistened with a mild, neutral...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 122
3. Wipe the plastic paper release blade on the lower paper guide with a cloth pre-soaked in 90% 
isopropyl alcohol.
4. Lower the paper guide to its original position.
5. Close exit door B.
8X70-084
8X70-080
8X70-018
Downloaded From ManualsPrinter.com Manuals 

Maintenance
ColorQube 8570/8870 Color Printer
User Guide123
Cleaning the Feed Rollers
Ink on the paper and tray feed rollers can leave marks on pages. Use the following procedure to clean 
the rollers.
1. Open exit door B.
2. Clean the gray exit rollers using a soft, clean cloth. Close exit door B.
8X70-016
8X70-131
Downloaded From ManualsPrinter.com Manuals 

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 124
3. Open Tray 1 and clean the gray pick roller. Close the tray.
4. Clean rollers in the top of the printer’s Tray 2 slot:
a. Open Tray 2 and pull it completely out of the printer, then set it aside.
b. In the top of the printer’s Tray 2 slot, locate the release lever to the right of the gray pick 
roller assembly. Pull the release lever toward you to let the roller assembly swing down.
8X70-132
8X70-133
2
1
8X70-134
Downloaded From...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide125
c. Grasp and pull the roller assembly straight down to remove it from the printer.
d. Clean the roller with clear packing tape. One method is to lay a strip of clear packing tape 
sticky side up on a table or counter and run the pick assembly along the length of the tape.
e. Reinstall the roller assembly: hold it vertically so that it lines up with the spaces into which it 
fits. Gently snap the assembly into the slots so that it hangs down in...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 126
f. Swing the roller assembly back and gently push it into the top of the tray slot until the pin 
snaps into the pin slot.
5. Clean the separator roller in the tray by rubbing clear packing tape on it.
6. Reinstall the tray, making sure to completely close it.
7. Repeat steps 4–6 for any installed optional feeder trays (Trays 3, 4, and 5).
Usage Counters
This section includes:
•Billing Meters on page 126
•Supplies Usage on page 127
•Usage...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide127
To view billing meter information:
1. On the printer control panel, select Information and then press the OK button.
2. Select Billing Meters > OK. The impressions list is displayed.
3. For a description of each billing meter, such as 2 Meter Billing, select the meter and then press the 
control panel Help (?) button.
Supplies Usage
The Supplies Usage page prints the percentage of ink used and the estimated amount remaining, and 
the life...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 128
To load ink:
1. Remove paper from the output tray.
2. Open ink loader door C.
3. Locate the ink-loading bin that is low. A label above each bin indicates the solid ink color and 
shape for that bin.
4. Remove the solid ink from its packaging.
8X70-097
8X70-128
Downloaded From ManualsPrinter.com Manuals 

Maintenance
ColorQube 8570/8870 Color Printer
User Guide129
5. Place the solid ink into the opening of the appropriate ink-loading bin. Do not force the solid ink 
into the ink-loading bin. Each solid ink color is uniquely shaped to fit into the correct bin.
Note:The ink shapes vary by printer so be sure to order the correct ink for your specific printer.
CAUTION:Only use ink designed exclusively for your printer.
6. Close the ink loader door. Warming up, Please wait is displayed on the printer control...

Maintenance
ColorQube 8570/8870 Color Printer
User Guide 130
To empty the waste tray:
1. Open side door D.
2. Pull the waste tray (labeled B) completely out of the printer.
WARNING:The waste tray may be hot; handle it carefully.
Note:The waste tray may be locked if the printer is in a warm-up cycle or if the ink is cooling 
following the Eliminate Light Stripes troubleshooting routine. If the tray is locked, close the door 
and wait 15 minutes before repeating steps 1 and 2.
8X70-034
8X70-035
Downloaded...