Xerox 6279 User Manual

4.Select Configure Job Accounting....
5.Select the appropriate option:
•Enabled: Job accounting information is required for all users. If a user supplies a
valid user name and account ID, he/she can perform printer, copy and scan
operations. If the user does not supply a valid user name and account ID, only
printer operations can be accessed and copy and scan options do not display on
the screen.
•Disabled: Job accounting is turned off. The user can access the printer, copy, and
scan operations listed on...

3.Enter the user name and account ID provided when Job Accounting was set up at
your location.
NOTE
Accounting must be set up from a third party job management tool, such as the
Account Management Tool offered by Xerox.
4.Select Enter.
The Accounting icon will display in the upper right hand corner of the screen.
Configure Job Reprint
This feature gives the assigned System Administrator the rights to enable or disable
reprinting jobs. This prevents confidential information from getting into the wrong...

Power Outage Job Status
Should the system loose power unexpectedly and reboot, jobs are restored to their
previous state. This is similar to using the Shutdown and Restart button.
•All Copy/Scan jobs in progress will restart from the beginning automatically, when
power is resumed unless job reprint was disabled.
•Completed, cancelled, checkplot and sample copy jobs are discarded since they are
not considered reprintable.
•Jobs that were processing during the power outage are placed in the Job...

3.Move the Printer Power Switch to the Off position (down).
4.Move the Printer Circuit Breaker switch to the Off (down) position.
Immediate Image Overwrite
At most installations, users are able to recall the last copy or scan job and all the
associated settings. The recalled image(s) then can be printed without rescanning the
originals. This is the case when the Image Recall function (discussed above) is enabled.
Security concerns in some work environments might require that the image recall feature
be...

The Machine Information screen displays.
2.Select the Administration tab.
3.Select General Administration.
4.Select the Enable / Disable Immediate Image Overwrite.
The Set Immediate Image Overwrite Mode screen displays.
5.Select Enabled or Disabled.
See Online Help in Web Printer Management Tool for more details about using the
Immediate Image Overwrite feature.
Immediate Image Overwrite Algorithm
The overwrite algorithm for both IIO and ODIO conforms to the U.S. Department of
Defense Directive 5200.28-M...

3.Select General Administration.
4.Select Set Thumbnail Creation...
The Thumbnail Creation screen displays.
5.Select the Enabled or Disabled button.
Administrator Managed Queue
This feature is most often used in a centralized print environment where a System
Administrator sets a secured password for access to manage jobs.
When the Administrator Managed Queue is enabled, all incoming print jobs are placed
on hold.
The ability to release, hold and cancel jobs with the administrator manager queue
enabled is...

Sound Settings
The Sound Settings options determine whether or not tones will sound when the user
presses Control Panel buttons, makes an invalid entry on the Control Panel or Touch
Screen, or when a fault occurs. The factory default setting for sound is On.
1.Select the Services button on the Control Panel.
2.Select the Machine Info button from the Services Menu screen.
The Machine Information Screen displays.
3.Select the Administration tab.
4.Select Control Panel.
The Control Panel screen displays....

6.Move the slider to the desired sound volume.
7.Select Test Sound Level to hear a sample of the volume level.
8.Select Save to return to theControl Panel screen.
9.Select Close to return to theAdministration tab.
Timers
The Timers selection of the Control Panel screen allows you to set up the values for the
timeout features. The timeout features are defined on the following pages.
•Low Power
•Sleep
•Features
•File Deletion
•Print Interrupt
Low Power
This setting is the amount of time that must elapse...

3.Select Low Power timeout from the Timers screen.
The Set Timeout Durations Low Power Timeout screen displays.
4.Using either the scroll buttons or the numeric keypad, select the desired setting, and
then select Save.
5.Select Save on the Set Timeout Durations screen to return to the Control Panel screen.
3-15Xerox® 6279® Wide Format Solution
Printer User Guide
System Administration
Downloaded From ManualsPrinter.com Manuals 

Sleep Timeout
The procedure for setting up the Sleep mode is as follows. The setting range is 5 to 240
minutes. The factory default setting for Sleep mode is 55 minutes.
1.Select Control Panel from the Administration Tab.
2.Select Configure Timers...
The Set Timeout Durations screen displays.
3.Select Sleep Timeout from theTimers screen.
The Set Timeout Durations Sleep Timeout screen displays.
Xerox® 6279® Wide Format Solution3-16
Printer User Guide
System Administration
Downloaded From...