Xerox 6279 User Manual

Output Format (Print Jobs)
This feature lists Output Format preset sizes for print jobs.
Output Format (Copy Jobs)
1.Choose from the list of Output Formats.
2.Select the Save button.
3.Ensure that the output format media size is loaded into the drawer.
NOTE
If the output media size selected is not present in the media drawer, a media
mismatch error displays.
The Copy Option feature Machine Information > Administration > Copy Options
provides the ability to Configure Custom Output Format settings beyond...

Finishing
If a Finisher is attached to the machine:
1.Select the Finishing Override checkbox.
2.Select the Bypass button to override the finishing settings.
The Finishing screen displays.
3.Choose a Select Folder Program from those listed.
4.Select Bin choices.
5.Select the Title Block Location. This selection tells the machine how to fold the
document with the title block showing as indicated. Title blocks are found on
engineering drawings.
Remove Selected Jobs
This feature eliminates the job altogether...

The second choice, shown below, is done by browsing to and uploading a file. This may
be easier than installing a driver. However, you have to manually adjust the printer
settings (e.g., 5 copies vs. 1) prior to submission and then change them back. You are
also limited to file formats that FreeFlow Accxes can directly support.
To Enable Job Reprint:
1.Launch an internet browser and enter in the IP address of the access controller or
your printer. (http://xx.xxx.xx.xx)
2.Select the Configuration >...

As shown in the above screen, the Web Printer Management Tool Reprint Queue now
has an Edit button where the user can Edit Job Options specific for printing and then
submit the job to the designated remote printer.
The selected jobs disappear from the Reprint Queue and reappear in the Active Queue.
Xerox® 6279® Wide Format Solution2-8
Printer User Guide
Job Information
Downloaded From ManualsPrinter.com Manuals 

3
System Administration
This chapter describes features available on the Administration tab of the Machine
Information screen. The Administration tab allows the system administrator to manage
the following:
•General Administration
•Control Panel
•Network Setup
System Administration Overview
Most of the features available using the Xerox 6279 Printer are accessible to all users.
Some features, however, are restricted to the System Administrator if the environments
warrants it. Those features are then only...

Entering System Administration Mode
To enter the System Administration mode:
Press the Log In/Out button on the Control Panel to access the System Administrator
screen.
Login Options
The Log In/Out screen, shown below, allows the user or administrator to log in to the
system in one of two ways.
Xerox® 6279® Wide Format Solution3-2
Printer User Guide
System Administration
Downloaded From ManualsPrinter.com Manuals 

System Administrator
The Administrator login tab will allow the administrator to log in to the administrator
account or log out if already logged in. If the user has logged in as the administrator,
the account indicator in the upper right hand corner of the screen displays Administrator.
If not logged in, the indicator displays Guest.
Job Accounting
The Accounting tab will either state that accounting is not enabled or allow the user
to enter a user ID and account ID to log in. If the user is already...

If there is no system activity for a period of time specified in the Timers setup, (scanning
documents or screen touches or key presses), a timeout screen will be displayed for four
seconds, and then the user will be logged out automatically.
For more detailed information about Timers setup, see the Configuring Timers section
of this chapter.
Once you are logged in as an Administrator, you are able to view and make changes on
the Administration tab of the Machine Info screen.
NOTE
The buttons on the...

Setting the Date and Time
The administrator sets the date and time that displays on the Touch Screen and also
on controller-generated prints (banner sheets, reports, error messages, etc.) The machine
uses a 24 hour clock (0 - 23).
1.Select Machine Information from the Services menu.
2.Select the Administration tab.
Refer to the Machine Information chapter for more details on the feature.
3.Select General Administration from the Administration tab.
NOTE
If you are logged out, the system prompts you to log...

The Enter SA Password menu displays.
5.Using the numeric keypad to enter the digit(s), enter a system password.
6.Select Enter.
7.Select Close to exit the General Administration screen.
Job Accounting Overview
NOTE
The job accounting feature is an option, requiring a Feature Key to activate. If you
obtain this feature, the System Administrator can enable it at any time by sending
a special feature key file to the Printer. Contact your Xerox Sales Representative for
ordering information.
Job Accounting...