Vodavi Starplus 616 Flex Electronic Key System Installation Manual

630.5 PBX DIALING CODES 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
To enter PBX Dialing codes, dial an asterisk (‘) and 
[31] on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Press the program button to assign the first 
code. 
2. Enter the one or two-digit number on the dial 
pad. 
l The digit [*] and [#] can be entered as part of 
PBX or Centrex codes: 
-...

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
630.6 ATTENDANT POSITION 
PROGRAMMfNG STEPS DESCRIPTION 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
If you wish to change the attendant position, dial an 
asterisk (‘) and [32] on the dial pad. 
If you have a display phone, you will see the follow- 
ing: One station must be assigned as the attendant for 
CO line recalls and placing the system into night 
service by...

sTARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
630.7 PRESET FORWARD RING TIMER 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
If you wish to set this timer, dial an asterisk (‘) and 
1331 on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Enter the two-digit timer value on the dial pad 
(01-99) which corresponds to 01 to 99 seconds. 
2. When all changes have been made,...

sTARPLUS* 616 FLEX KEY TELEPHONE SYSTEM 
630.8 PRESET CALL FORWARD 
PROGRAMMING STEPS 
If you wish to assign a preset forward position to a 
station, dial an (‘) asterisk and [34] on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Press the station button for the station being 
given a preset forward position. 
2. Then press the station button of the station 
which is to receive the forwarded ringing. 
3. When all changes have been made, press the 
HOLD button. Confirmation...

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
630.9 CONFERENCE TIMER 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
If you wish to change the conference timer, dial an 
asterisk (‘) and [35] on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Enter the two-digit timer value on the dial pad 
(01-99) which corresponds to 01 to 99 minutes. 
2. When all changes have been...

sTARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
630.10 
STATION MESSAGE DETAILED RE- 
CORDING (SMDR) 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
If you wish to disable SMDR, dial an asterisk (*) and 
136) on the dial pad. 
If you have a display phone, you will see the follow- 
1. Press CO line(s) for which SMDR is 
disabled or enabled. DESCRIPTION 
Station Message Detail Recording is an optional...

STARPLUS @ 616 FLEX 
--‘W 
KEY TELEPHONE SYSTEM 
630.10 SMDR (Cont’d) 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
A. SMDR All Call/Long Distance 
To determine what calls are to be recorded, baud 
rate and print format, dial an asterisk (*) and [37j on 
the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Press the Sub-Field button to determine if all 
calls are to...

sTARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
630.11 DATA BASE PRINTOUT 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
If you wish to print out a copy of the data base, or 
any part of the data base, dial an asterisk (*) and [38] 
on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Press one of the following program buttons 
depending on what information is needed in...

sTARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
630.12 SYSTEM TIME & DATE FORMAT 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
If you wish to change the format of the LCD display, 
dial an asterisk (‘) and [39] on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Press the desired program button to determine 
the display format. 
l If LED(s) is on, 12 hr, MM/DD/YY format...

630.13 TOLL RESTRICTION TABLES 
PROGRAMMING STEPS 
Make sure you have entered the programming 
mode. 
To enter numbers into the toll tables, press the 
asterisk (*) and dial the following: 
Allow Table A = 41 
Deny Table A = 42 
Allow Table B = 43 
Deny Table B = 44 
If you have a display phone, you will see the follow- 
ing: 
1. 
2. 
3. Press desired bin number location. See the 
following program buttons: 
Dial the allow/deny number including don’t 
cares (8 digits maximum). 
l The digit [‘I and [#]...