Home > Vodavi > Telephone > Vodavi Starplus 616 Flex Electronic Key System Installation Manual

Vodavi Starplus 616 Flex Electronic Key System Installation Manual

Here you can view all the pages of manual Vodavi Starplus 616 Flex Electronic Key System Installation Manual. The Vodavi manuals for Telephone are available online for free. You can easily download all the documents as PDF.

Page 71

sTARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
: INPUT 2 PORT 01 STA 10 PORT 09 STA18 i 
PORT 02 STA 11 PORT 10 STA 19 
PORT 03 STA 12 PORT 11 
PORT 04 STA 13 PORT 12 E? Z? 
PORT 05 STA 14 PORT 13 STA 22 
PORT 06 STA 15 PORT 14 STA 23 
ER i: STA 24 
STA 25 
VT 
DT 
Figure 500.12 - SLA Cross-Connect Wiring 
cnn-33 ISSUE 1. JANUARY 1991  

Page 72

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
SECTION 600 
CUSTOMER DATA BASE PROGRAMMING 
600.1 INTRODUCTION 
The STARPLUS 616 FLEX Key Telephone System 
can be programmed to meet each customer’s indi- 
vidual needs. All programming is done at Station 10 
(Port 01) using the Enhanced or Executive model 
key telephone as the programming instrument. 
A BASIC model telephone cannot be used. 
Displays have been incorporated to aid in program- 
ming, therefore it is strongly recommended that the 
Executive...

Page 73

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
Table 600.1 - Data Fields and Default Values 
Field Description 
Station Configuration 
Station Class of Service 
Station Features 1: 
Do Not Disturb 
S stem Speed Dial Access 
A&m/Phone Box Signaling 
Preferred Line Answer 
Call Forwarding 
Auto Select ’ 
Statiooa~si$ures 2: 
Pagin Access 
P  Flexible S ation Numbers 
Flexible Button Assignment Data Field Sub Field Default Entry 
All stations set at COS 1 
:: 
Allowed at all stations 
: Access allowed at all...

Page 74

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
assigned as the attendant. 
To enter the program mode, the programmer must 
first verify that the key telephone is properly con- 
nected to station port 01. 
1. Press ON/OFF button to ON (button lights & 
intercom dial tone is heard). 
2. On the dial pad, press the asterisk (*) twice. 
3. On the dial pad, enter [5-6-2-31 (LOAD). Con- 
firmation tone is heard. Dial tone is removed. 
4. The HOLD button & the ON/OFF button will be 
lit. 
I NOTE 
The programming mode...

Page 75

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
J 
SP616FLEX VlnOA 901213 
ENTER PROGRAM CODE 
FLEX BUTTON FIELD 
H 
L 
I7 
P 
lo 
SPD 
I SUB-FIELD BUTTON FIELD I 
~]“p]jl]//I”j,pI 
Figure 600.1 - 616 FLEX Default Button Mapping 
l3m.A ICC1 IC i IANIIAPV IQ01  

Page 76

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
SECTION 610 
STATION CONFIGURATION 
610.1 STATION CLASS OF SERVICE 
PROGRAMMING STEPS 
Make sure you have entered the programming mode 
(Sec. 600.4). 
If you wish to change the Class of Service of a 
station, dial an (*) asterisk & [01] on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Press the button of the station to be assigned a 
class of service. 
2. Then press appropriate button for the class of 
service being assigned to...

Page 77

STARPLUS* 616 FLEX KEY TELEPHONE SYSTEM 
610.2 STATION FEATURES 1 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first (Sec. 600.4). 
If station features are to be changed, dial an asterisk 
(‘) and [02] on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. 
2. 
3. Press the button of the station to be pro- 
grammed. 
Toggle the following program buttons ON or 
OFF,...

Page 78

sTARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
610.2 
STATION FEATURES 1 (Cont’d) 
PROGRAMMING STEPS DESCRIPTION 
Call Forward (Station) 
Stations can be allowed or denied the ability to have 
incoming, intercom and transferred outside lines 
forwarded to another station. 
Default: Station Call Forward is enabled at all Sta- 
tions (LED ON) 
Auto Select 
This feature allows a user to press an idle CO line 
button and have that line automatically seized and 
dial tone received through the speaker. The user 
can...

Page 79

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
610.3 STATION FEATURES 2 
PROGRAMMING STEPS 
To program further station features, dial an asterisk 
(*) and [03] on the dial pad. 
If you have a display phone, you will see the following 
display: 
1. Press the button of the station to be pro- 
grammed. 
2. Then toggle the following program buttons ON 
or OFF, depending on what features that station 
is to be given. 
l If LED is ON, feature is enabled 
l If LED is OFF, feature is disabled 
3. When all changes have...

Page 80

!%ARPLUs@ 616 FLEX KEY TELEPHONE SYSTEM 
610.4 FLEXIBLE STATION NUMBERS 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
If station intercom numbers are to be changed, dial 
an asterisk (*) and [04] on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Press the PORT* button of the station whose 
intercom number is to be changed (LED will 
flash). 
‘Port = the...
Start reading Vodavi Starplus 616 Flex Electronic Key System Installation Manual

Related Manuals for Vodavi Starplus 616 Flex Electronic Key System Installation Manual

All Vodavi manuals