Vodavi Starplus 616 Flex Electronic Key System Installation Manual

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
620.5 CO RING DETECT 
PROGRAMMING STEPS DESCRIPTION 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
If CO Ring Detect timer is to be changed, dial an 
asterisk (‘) and [i 61 on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Press CO line button for which timer will work. 
2. Enter the one-digit timer value on the dial pad 
(2-9) which...

sTARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
620.6 DIAL PULSE 
PROGRAMMING STEPS , 
If pulses per second (pps) and break/make ratios 
need to be changed, press the (*) & dial [17] on the 
dial pad. 
If you have a disolav ohone. vou will see the follow- 
ing: 
1. 
2. 
3. Press CO line button for line which is to be 
assigned dial pulse. 
Then press the appropriate program button. 
When all changes have been made, press the 
HOLD button. The next CO Line will automat- 
ically be presented for programming....

620.7 RING TIME-OUT TIMER 
PROGRAMMING STEPS 
DESCRIPTION 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
If the Ring Time-out Timer needs to be changed, dial 
an asterisk (*) and [18] on the dial pad. 
If you have a display phone, you will see the follow- 
ing: This feature is used to assign the Ring Time-out time 
the system will use for detecting the end of a valid 
ring cycle. 
Default: By default, the Ring...

STARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
SECTION 630 
SYSTEM CONFIGURATION 
630.1 SYSTEM FEATURES 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starling to program 
here, enter the program mode first. 
To change any system feature, dial an asterisk (‘) 
and 1211 on the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. 
2. Toggle the program buttons ON or OFF, de- 
pending on the desired features. 
l If LED is ON, feature is...

630.1 SYSTEM FEATURES (Cont’d) 
PROGRAMMING STEPS DESCRIPTION 
Alarm Signaling 
This feature determines the type of signaling re- 
ceived by the stations. 
If the LED is lit, it means a .25s orV.25~ off warble 
tone repeated continuously will be given; 
If the LED is unlit, it means a single burst of tone ring 
(once) will be given. Phone Box ringing is also af- 
fected by this feature. 
Default: By default, Alarm Signaling is defaulted to 
a repeated tone (LED ON). 
Related Programming: 
Refer to...

KEY TELEPHONE SYSTEM 
630.2 TIMERS 
PROGRAMMING STEPS 
If you are in the program mode, continue using the 
program codes. If you are starting to program here, 
enter the program mode first. 
A. Exclusive Hold Recall 
To change this timer, dial an (*) asterisk and [22] on 
the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Enter the three-digit timer value on the dial pad 
(000-255) which corresponds to 000 to 255 
seconds. An entry to 000 will disable the timer. 
2. When all...

630.2 TIMERS (Cont’d) 
PROGRAMMING STEPS 
C. Transfer Recall 
To change this timer, dial an (*) asterisk and [24] on 
the dial pad. 
if you have a display phone, you will see the follow- 
ing: 
1. Enter the three-digit timer value on the dial pad 
(000-255) which corresponds to 000 to 255 
seconds. An entry to 000 will disable the timer. 
2. When all changes have been made, press the 
HOLD button. Confirmation tone will be heard 
and the display will now update. 
D. Message Wait Reminder Tone 
To change...

sTARPLUS@ 616 FLEX KEY TELEPHONE SYSTEM 
630.2 TIMERS 
(Cont’d) 
PROGRAMMING STEPS DESCRIPTION 
E. Pause Timer 
To change this timer, dial an (‘) asterisk and [26] on 
the dial pad. 
If you have a display phone, you will see the follow- 
ing: 
1. Enter the one-digit timer value on the dial pad 
(i-9) which corresponds to 1 to 9 seconds. 
2. When all changes have been made, press the 
HOLD button. Confirmation tone will be heard 
and the display will now update. When dialing a speed number, a timed pause...

sTARPLUS@ 616 FLEX 
630.3 EXECUTIVE/SECRETARY ASSIGN- 
MENTS 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
To program Executive/Secretary assignments, dial 
an asterisk (*) and [27] on the dial pad. 
If you have a display phone, you will see the follow- 
ing : 
1. Press button for desired executive/secretary 
pair assignment. 
2. Press the station button to select the desired 
executive...

630.4 LOUD BELL/CO LINE CONTROL 
PROGRAMMING STEPS 
If you are in the programming mode, continue using 
the program codes. If you are starting to program 
here, enter the program mode first. 
To program Loud Bell Control/CO Line Control As- 
signments, dial an asterisk (*) and [28] on the dial 
pad. 
If you have a display phone, you will see the follow- 
ing: 
1. LBC button LED is lit. Press CO line button to 
program CO Line contact. 
2. Press the button of the contact to be pro- 
grammed. 
3. Press the...