Vodavi Infinite Dvx I, Dvx Ii Hybrid Key Telephone Systems Installation Manual

STATION FEATURE OPERATION infinite DVX ’ and DVX ’ DigWal Key Telephone Systems 
TO review the next l&t entry: c. Dial the station where the call is to be 
a. Press the HOLD button. transferred. 
To review the prwious list en- 
a. Press the TRANS button. d. When the 2nd station answers, you are in 
a supervised transfer mode [lst station is 
staged for transfer]. 
400.41 RVTERCOM CALTJNG 
Placing an Intercom Call 
a. Press the DSS button of the party to be 
called (if prograrnm 
ed at your phone). 
& the...

iqfinite DVX’andDVKn 
~jgital Key Telephone Systems STATION FEM’URK OPERATION 
l In addition, all the LEDs are flashed at 
the rate of 15 IPM. 
B. Keyset Button Test 
1. Pressing a keyset button turns on the LED 
and displays an LCD message identifying 
the button number. 
1 
Pm m mTm.s 
I +**+t** ******* 
I 
In addition swWhing the I-TIP switch from 
one position to another will cause the letter 
‘HJOS”, T-POS”, or “PPOS” to be ciis- 
played. 
2.Pressing dial pad keys dispIays an LCD 
message that...

infinite DVX ’ and DVX ’ 
Digital Key Telephone Systems 
hswering a Meet Me Page 
a. Go to the nearest telephone and dial 1771 
on the dial pad, 
Eess the pm-programmed* MEET ME 
PAGE ANSWER button. You will be con- 
nected to the party that paged you. 
*Refer to Sec. 400.37. Flexible Button 
Assignment. 
400.47 IlEES%GE WAlTING 
Leaving a Message Waiting Indication: 
If you dial a station that is busy, unattended, 
or in DND, you can leave a message waiting 
indication. 
a. Dial the Message Waiting Code...

*tie DVX’andDvX’ 
D&ftal Key Telephone Systems 
STATION FEATURE OPERATION 
I-. to initiate an OHVO announcement. The 
HOLD button LED will flash at the called l The calling (originating] station and re- 
CR-IV0 station. ceiving station (STA B) must 
be OHVO 
digital terminals. 
b . Both OHVO stations will receive a one-beep 
warning tone. The station receiving the 
OHVO call must be off-hook and in the 
“HF” mode, and then the calling OHVO 
party may begin the voice announcement 
to the 
called OHVO...

STATION FEA’WRE OPERATION 
. iqfinite DVX’andDVX* 
DigItal Key Telephone Systems 
l The calfed station may send (multiple 
messages) and even after sending a mes- 
sage, may press the Camp-On button to 
talk to the calling station, Each time a 
message is sent, the spksh tone will be 
heard and both displays will be updated. 
l LED’s will follow Camp-On iJ3D lamping 
sequences. 
Each station can be programmed to allow re- 
ceiving OHVO cds as part of Station Program- 
ming. Each station may be programmed...

i@nLte DVX ’ and DVX J-I 
D&it,aI Ecy Telephone Spsteme STATION FEATURE OPERATION 
400.55 PERSONALIZED -GES 
Each station can select a preassigned message 
to be displayed on the LCD of any key telephone 
calhg that station. 
There are ten possible messages which can be 
left. 
a. Dial 16331 on the dial pad, 
Or 
press a pre-programmed* MSG button. 
b.Dial the two-digit code for the meSSage 
which will appear. 
00 
01 
t 
02 
03 
04 
05 
06 
07 
08 
09 
1 
clears message 
ON VACATION 
RETURNAM 
RETURNPM...

~mYI”ION =- OPERA’i’TON infinite DV22’ and DVX ’ 
Digital Key Telephone Systems 
l Both key telephones and SLTs may ac- 
tivate the message. SLTs are notified 
that they have an active message with a 
warning tone when going off-hook, 
l Incoming and outgoing calls are not in- 
hibited in any way with a message dis- 
PlaYed. 
l When a message is displayed by a key 
telephone. the DND button LED flashes 
at 
15ipm. 
l When DND is invoked on the telephone 
the message is canceled. 
l Message Access (with a...

i@nite DVX’~dDVX’ 
~i@taI Key Telephone Systems 
STATION FEATURE OPERA’ITO~V 
b. Dial the asterisk [*I button. 
- System will automatically select the 
original line used to place the call and 
r&al the number. 
- If that line is busy. the system will auto- 
matically select another line from the 
same group and redial the number. 
- If no lines are avaiiable in the same 
group. station wfll receive busy tone and 
c3.n queue for a line. 
- If the station user preselects a line before 
activating SNR. the...

iqfmite DVX * and DVX I1 
Digrti Key Telephone Sy&ems 
- 20 
to 99 for System Speed numbers. 
d.Dj& the desired telephone number. (in- 
cluding special codes described below) 
- TRANS - Pressing the TRANS button 
during number entry initiates a Pulse- 
To-Tone switchover. 
- HOLD - Pressing the HOLD button dw- 
ing number entry inserts a Pause. 
- FLASH - Pressing the FLASH button in- 
serts a Flash into the speed number. 
- TRANS - Pressing the TRANS button as 
the first entry in the speed bin inserts a...

..: 
‘\,. 
\. . 
.-. 
cc : f 
-. 
. :’ 
iqfinib DV2Z’andDVX’ 
~i#z.al Key Telephone Systems STATION FEATURE OPERA’IYON 
4 Text message responses may only be 
activated by digital terminals and the 
receiving station must be a Digital Dis- 
play telephone. 
4 The text message responses will appear 
on both the calling station and the called 
station (station activating) text re- 
sponses] LCD displays. 
l If the cdlfng station is a non-LCD tetmi- 
ml. the called station will receive error 
tone when...