Vodavi Infinite Dvx I, Dvx Ii Hybrid Key Telephone Systems Installation Manual

infinite DVX I and DVX ’ 
Di@talKeyTdephoneSystems 
400.17 CAJL PARK 
To place an outside call in park and consult 
with, page, or call an internal party 
While connected to an 
outside line: 
a. Press TRANS button. The 
caller is put on 
Exclusive hold. 
b. Dial parking location (220 to 227). Co&u- 
mation tone is heard. 
c. If you hear busy tone. press TRANS and 
dial another parking 
location. 
Relieving a Parked Call 
a. Lift handset or 
press ON/OFF button. 
b. 
Press the pound I#] button. 
c. Dial...

iqfmite DVX ’ and DVX II 
D&ital Key Telephone Systems STATION FEMURE OPERATION 
Answering a Camp On 
If you are on a connected call, hear one burst 
of muted ringing, and your CAMP ON button is 
flashing, you have a call waiting for you. 
To answer: 
a. Press the CAMP ON button. Any outside 
Iine you are connected to wiU be placed on 
hold. You may converse with the station 
placing the call. 
b. Press flashing outside line button. ff a call 
is being transferred. 
If you do not have a pre-programmed*...

r 
sTATiON P’i!Si’l”URE OPEZWMON 
C. To re-enter an unsupervised conference. 
lift handset and press flashing pre-pro- 
grarmned* CONFbutton. The CONEbutton 
lights steady and confkmation tone will be 
heard. 
Termktating a Conference 
To terminate a conference the conference initia- 
tor who is actively in the conference repfaces 
handset or push ON/OFF button to OFF. To 
terminate an unsupervised conference, press 
the flashing pre-programmed* CONF button 
while on hook, all parties wilI be dropped....

r 
i@ite DVX ’ and DVX ’ 
Dfffital Key Telephone Systems 
STATION BWU’URE OPERATION 
rate, number of data bits and number of 
stop bits. This configuration will be done 
by the first attendant or in the caSe of an 
associated data unit can be confiied 
by the user. 
l Data ports can be arranged in ACD/UCD 
Groups or Hunt Groups. 
l Data ports do not have to be associated 
with a keyset. however to connect two 
DDIU devices one of them must be asso- 
ciated with a key& unless the connec- 
tion is made by...

iqjlnite DVX I and DVX  
Digital Key Telephone Sy&c.ms 
DW II System provides loCatiOnS for up to 2OCl 
names. 
Directory dialing also 
allows users to program 
a ‘name” along with a speed dial bin for use in 
later locating a speed dial number. When 
prompted to do so. the system will display the 
name associated with a speed dial number on 
the LCD display so that when the desired name 
is shown, the user may then have the system 
dial the number. 
Directory dialing also aIlows users to associate 
a...

&finite DVX’undDVX’ 
~i@tal Key Telephone Systems 
STATION FEATURE OPERATION 
400.29 DIRECT XNWARD SYSTxcM AC- 
CESS [DISAI 
a. Call the phone number the system admk- 
istrator specifkd as the DISA line. The 
system answers and returns intercom dial 
tone. 
b. Enter the DISA access code also specified 
by the system administrator, if applimble. 
Dial tone is 
returned. 
To place an outgoing call: 
a. Dial a group access code: 9. 82 - 87, CO 
Diat tone is returned. 
b. Dial the desired telephone 
number....

r 
STATION FEA’XPRE OPER4TION 
infinite DVX ’ and DVX ’ 
Digit4 Kq Telephone Systems 
Conditions: 
l Station users may listen to alI tones by 
dialing the two-digft codes one after an- 
other. The tone that is sounding when 
the SPEED button is pressed will be 
saved as that station’s tone ringing se- 
lection. 
l A station’s tone rhxging selection will be 
maintained in a battery protected area of 
memory. Therefore if a system experi- 
ences a power fa&xe, or a soft or hard 
restart, a station’s tone...

irlfSnite DVX’andDVXn 
~j.@taI Key Telephone Systema STATION FEATURE OPERATION 
466.32 EXCLUSIVE HOLD 
When a line is placed on Exclusive Hold. no 
otherstationfnthesystemmnretrievethiscall. 
Exclusive Hold may be programmed to be acti- 
vated on the fist or second depression of the 
Hold button. CO Lines while in a transfer hold 
are always placed in an Exclusive Hold condi- 
tion. 
400.33 EXECUTIVE 
OVERRIDE 
Allows stations designated as “Executive” the 
ability to override and ‘barge in” on other...

iqfinite DVX I and DVX ’ 
the station user. Refer to Table 400-2 Flex 
Button Prog ramming Codes for a complete 
Ming of code/features that may be pro- 
grammed onto a flexible button. 
l SPEED DIAL: This button can be pro- 
grammed to automaticaS@ access a speed 
number location for one-step operation. PBX 
and Centrex codes can be programs ed into 
a speed dial bin and accessed by one button 
depression. 
l POOLED GROUP ACCESS: A group of out- 
side lines can be placed under one button. 
When this...

i@nite DVX I and DVB: ’ 
~M@al IKey Telephone Systems STATfON FEATUW% OPEBA~ON 
400.38 GROUP LISTENING 
All digital key stations have built in speaker- 
phones. Station users may use the speaker to 
monitor a calI while using the handset to con- 
verse with the outside party. This enables other 
people 
in the room to listen to both parties in 
the conversation. 
a.While conversing. on the handset. press 
the ON/OFF button. Both parties of the 
conversation can then be heard on the 
digital station’s...