Vodavi Infinite Dvx I, Dvx Ii Hybrid Key Telephone Systems Installation Manual

irlfinite DVX I and DVX ’ 
~&$al Key Telephone Syetcms LCD DXSPLAYS 
Table 430-I LCD IXsplaps (Co&d) 
FLIIWXION CALLING STATION’S DISPLAY CALLED STATION’S DISPLAY 
Do Not Disturb 
Call Back 
Outside Line 
Transfer 
Message WaiEng 
Reply to a 
Message Waiting 
I 
T 
i 
DO NOT DISTURB ..(name).. 
MfNDDlYY HH:MM am 
CALL 8ACK FROM STA XXX 
MhVDDM HHMM am STAllON IN DO NOT DISTURB i 
MhUDDlYY 
HH:MM am 
I MMIDDp(Y 
HH:MMam 1 
I CALL FROM STA XXX 
MSG:XXXXXXXXXXXXXXX 
MMIDDNY HH:MM 
6m 
CALL BACK FROM STA XXX...

LCD DISPLAYS imite DVX ’ and DVX ’ Digital Key Telephone Systems 
Table 430-I LCD Displays (Cont’d) 
FUh’C’I7ON 
I 
I 
I Programmed Flash 
! Co-d (FJ 
Programmed Pause 
Command (PI 
1 Programm ed Pulse-To- 
Tone Switchover (Sl 
CO Line 
0ueW 
ACD or UCD 
Groups CALLING STATION’S DISPLAY 
F12 
950777Fl234567 
SPEED XX HH:MM 
am 
I 95mvst234S67 SPEED XX HH:MM am 
QUEUE CALL BACK 
LlNExx HH:MM 
am 
CALLED STATION’S DISPLAY 
430-6 
bsue 1, January l-3  

iqfinite DVX ’ and DVX JJ 
D@itd Key Telephone~Spstems 
LCD DISPLAYS 
Table 430-I LCD Displays (Cont’d 
FUNCTION CALLING STATIONS DISPLAY 
I 
mging co Lines 
p------ 
I DispIay Security 
Feature 
t 
Staticm Fomardiq 
Off-Net 
Cal&g a Station 
Forwarded m-Net 
lbeiore and after call is 
answered) 
Calls in Queue 
ISupervisor) 
Calls in Queue 
(using Dial Code) 
-I 
! 
Unavailable Mode 
(Agent St&on) 
Station calltng a 
Voice Mail Group 
Pilot Number L 
I CALLED SJZAlION’S DISPLCI’Y 
Iasuc1,Jan~1993 
430-7  

JXII DISPLAYG iqfinite DVX ’ and DVX ’ 
Digital Key Telephone Systems 
Table 430-l LCD Dfl3plays (Cont’d 
I FUNCTION 
1 CALLING STATION’S DISPLAY 
I 
1 I 1 I 
; 
1 
/I DIAL NAME: 
Dial By Name 
MRUDDIYY 
HH:MM pm 
Off-Hook 
Voice tier (OHVO) ANNOUNCE TO STA XXX 
MMIDDNY 
H&MM am 
I 
I/ MONlTORtNG STA XXX 
i Executfve Override MWDDIYY HH:MM 8m 
I’ 1 
CALLED STA’IIOWS DISPLAY 
1 
- 
430-s Issue 1. JaQufiry 1999  

infinite DVX ’ and DVX’ 
Di#t,al Key Telephone 
Systtms INSTALLATION 
SECTION 500 
INSTALIATION 
500.1 SITEPIANNING 
Selection of a suitable Iocation is the most 
basic, yet most critical consideration in the 
installation of a telephone system. The follow- 
ing should be considered when choosing an 
appropriate location for equipment installation: 
l Ampie space must be allowed to remove 
the KSU cover. to access assemblies and 
cards within the cabinet and allow space 
for the MDF (Main Distribution...

infinite DVX ’ and DVX ‘* 
Digital Key Telephone Systems 
tion is available through telephone eqtip- 
ment supply houses. Care should be taken 
to ensure that such protection devices are 
installed in accordance with the manufac- 
turer’s instructions and to ensure that no 
more than one set of protectors be installed 
on central office lines at the installation 
premises. Improper installation can be a 
serious safety hazard. 
Failure to provide the proper lightning pro- 
tection wilI increase...

irlfinite DVX’ 8xM DVX’ 
Digital Kep Telephone Systems INSTALLATION 
Basic Cabinet (4x81 
Ferrite I* I, Expansion Cabinet (4x8) 
)7’ -mm- ----e 
--------- 
:a a : 
:i! 
:.t 
1 
0; 
I DTMF: 
--r---^-.C  , 
L 
[ ExpZion -:I:” 
B K.’ +I- ,I,,  +Tl”lf 
.,::;.: 
1 . , . 
. . . .._ 
nr _.I 
.* , , . . 
r 
E 3/8 in. 
*- F --- - 
,nr ------7 
am 12c 
-PI ! :I3 Ra;pd -i 
.--J 
pL”---. 
MOlUBdM 
input 
Typical Conni3ction 
14 CO has maximum 
----------------------_^___-__________I 
Connectho Blocks I I 
Dedicated...

INSTALLATION 
iqjinite DVX’ and DVX” 
Di@al Key Telephone Systems 
14.50’ 
Figure 500-2 D&Hal Flatpack Mounting Dimcnaions 
5004 
rssue 1, Janauuy 1093  

ice board. The power supply and cabinet 
meet all safety requirements to comply 
with UL 1459 Second Edition and CSA 
~22.2 No. 225 standards. 
LED5 a 
hldicators: 
Four green LEDs are located on the main 
key seTYice board along the top of the PCB. 
lXvo of the LEDs IDS2 & DS3) indicate the 
presence of +5V & -5V dc. LEDs DSl ad 
DS5 indicate the presence of +12V dc used 
to supply power to the key stations (one 
LED per four stations). An extinguished 
LED indicates the absence of the associ- 
ated...

A separate option strap (J26) allows the 
use of either 256Khit. 1 Megabit, or 4 
meabit static RAM chips to be used for 
RAM memory. Refer to Section 800. 
Maintenance and Troubleshooting for the 
option strap choices. 
CO Line/Station Interfaces: 
‘Ihe Basic Key Sertrice Unit (BKSUI con- 
tains the necessary circuitry to connect 
four CO/Centrex/PBX loop start lines and 
eight digital key telephones to the system. 
Thfs card also contains one additional 
voice (lransmit) path for external paging. 
The...