Vivitek Projector D8800 Series User Manual

51
DLP Projector - User’s Manual
Change Filter
The filter should be changed every 3000 hours.
To replace the Filter on the left side of the projector
1. Remove the cover on the left side of the projector.
2. Remove the filter from it.
3. Insert a new filter.
4 . Install the cover on the left side of the projector.   

DLP Projector - User’s Manual
52
To replace the Filter on the right side of the projector
1. Loosen the fan cover on the right side of the projec-
t o r.
2. Open the fan cover and remove the filter from it.
3. Insert a new filter and install the fan cover on the 
right side of the projector.
4 . Secure the fan cover.
 
„ Optional component
Component P/ N
Handle D88-Acc-HDL-00
Foot D88-Acc-Fot-00
Filter D88-AF00   

53
DLP Projector - User’s Manual
Change the Color Wheel
The color wheel is on the top side.
j Loosen the top cover
    Slide the cover and remove it.  k Loosen the color wheel’s screw.
l Life up the color Wheel
²
Ç
o Slide the bracket to recover 
    the machine then use the 
    screw to fix the top bracket 
    on the machine. m Replace the color wheel 
    that you wanted.
n Tighten the screws.
Ç
²           

DLP Projector - User’s Manual
54
LED Status
SHUTTER
TEMP.LAMP 1LAMP 2STATUSPOWER
Power LED
LED DisplayProjector status Procedure
Off Power is off
Flashing GreenPrepare to turn on projector Wait till projector start displaying
Orange Projector cooling Wait until cooling finish ( ~ 90 sec)
On RedStandby mode
Green Projector is on
Status LED
LED Display Projector status Procedure
Off No Problem
Flashing Red (Cycles of 1)Cover Problem Contact local Vivitek Server Center
Red (Cycles of 4) Fan Problem Contact...

55
DLP Projector - User’s Manual
SPECIFICATIONS
ModelD8800D8900D8010W
Display Type DLP
Brightness 8000 ANS Lumens10,000 ANS Lumens8000 ANS Lumens
Native Resolution WUXGA (1920 x 1200)XGA (1024 x 768)WXGA (1280 x 800)
Maximum Resolution WUXGA (1920 x 1200)@60Hz
Contrast Ratio 3000:1
Lamp Life and Type 2000/2500 Hours (Std. / Eco Mode), 400W x 2
Throw Ratio (Standard Lens) 1.73 - 2.27:11.79-2.35:11.81-2.38:1
Image Size (Diagonal) 40”- 500”40”- 500”40”- 500”
Projection Distance 1.83 – 14.9m (6 - 49ft)1.79 –...

DLP Projector - User’s Manual
56
SERIAL INTERFACE SPECIFICATIONS
Transfer Specifications
ItemSpecifications
Transmission Speed 38400 bps
Data Length 8 bit
Parity None
Stop Bit 1
Flow Control None
RS-232 Commands
There are 2 types of commands:
 
y Key commands 
 
y Operation commands 
All commands start with 2 letters as shown in the following:   
y “ky” for key commands. 
 
y “op” for operations commands. 
 
y Key Commands The following example is the syntax for key commands: ky  [CR]
IR Codes and Key...

57
DLP Projector - User’s Manual
KeyCode RS232 Key name Key Wording Description
27 0x9E LIGHT
28 0x9A CLEARNot available.
29 0x9B SHUTTERTurn on or off the shutter.
30 0x9C ID SETNot available.
Operations Commands
The following example is the syntax for operations commands:
 op   [CR]
No. Function Command Action on unit
1 Set =Makes the unit take that value.
2 Get ?Asks what the current value is.
3 Increment +Adds 1 to the current value.
4 Decrement -Subtracts 1 from the current value.
5 Execute...

DLP Projector - User’s Manual
58
OperationCommand Values
pattern = ?0 = Color Bar
1 = Cross Hatch
2 = Burst
3 = Red
4 = Green
5= Blue
6 = White
7 = Black
8 = Red (TI)
9 = Green (TI)
10 = Blue (TI)
11 = HRamp (TI)
12 = Off
color.space = ?0 = Auto
1 = YCbCr
2 = YPbPr
3 = RGB-PC (0-255)
4 = RGB-Video (16-235)
input.lock = ?0 = Auto
1 = 48 Hz
2 = 50 Hz
3 = 60 Hz
no.signal = ?0 = Logo
1 = Blue
2 = Black
3 = White
vid.std = ?0 = Auto
1 = PAL
2 = SECAM
3 = NTSC
auto.imgadj = ?0 = Off
1 = Auto
2 = Always
2....

59
DLP Projector - User’s Manual
OperationCommand Values
red.offset = ? + -0-200
green.offset = ? + -0-200
blue.offset = ? + -0-200
red.gain = ? + -0-200
green.gain = ? + -0-200
blue.gain = ? + -0-200
sharp = ? + -0-200
nr = ? + -0-200 (Noise Reduction)
aspect = ?0 = 5:4
1 = 4:3
2 = 16:10
3 = 16:9
4 = 1.88
5 = 2.35
6 = Letterbox
7 = Native
8 =Unscaled
zoom (Overscan) = ?0 = 5:4
1 = 4:3
2 = 16:10
3 = 16:9
4 = 1.88
5 = 2.35
6 = Letterbox
7 = Native
8 =Unscaled
h.total = ? + -0-200
h.pos = ? + -0-200...

DLP Projector - User’s Manual
60
OperationCommand Values
fan.pos = ?0 = Normal
1 = Vertical
2 = Down
zoomio + -+ => Zoom out
- => Zoom in
focus + -+ => Focus Near
- => Focus Far
vert.offset + -+ => Up
- => Down
horiz.offset + -+ => Right
- => Left
lens.load =1~10 set of lens memory (Load)
lens.save =1~10 set of lens memory (Save)
lens.center (execute)Midposition shift
h.keystone = ? + --350~+350
v.keystone = ? + --200~+200
warp.rotat = ? + --20 ~ +20 (in ¼ 1/4 unit)
warp.pinbrl = ? + --100 ~ +100...