Vivitek Projector D8800 Series User Manual

21
DLP Projector - User’s Manual
LAN Connection
INSDI OUT
LAN HDMI
DVI-D
RGB
Desk Top or Notebook
Network Swtich   

DLP Projector - User’s Manual
22
Start using the projector - Adjustments
Connecting to AC Power
The D8800/D8900/D8010W ship with various types of AC power cords. Choose the one that is appropriate to your 
locale. Plug the female end of the power cord into the AC receptacle on the rear of the projector (AC 100V ~ 240V); Then, 
connect the other end to your AC power source.
Turning on the Power
Press POWER SWITCH on the projector.
Press ON on remote control or POWER on the projector. The power LED...

23
DLP Projector - User’s Manual
Changing the OSD Language
The D8800/D8900/D8010W can display the menus in English, French, Spanish, German, Portuguese, Simplify Chinese, 
Traditional Chinese, Japanese or Korean. Press MENU to display the OSD, press   to select CONTROL item. Then press 
  to select LANGUAGE and press   a language that you wanted. Then press ENTER  to confirm your selection.
INPUTP ICTURE
Eco Network Power
Auto Power Off
Auto Power On
Projector Control
Network
Start Up Logo
Tr...

DLP Projector - User’s Manual
24
Lens Adjustments
The D8800/D8900/D8010W gives you a great deal of control over the picture size, position and focus. Focus To focus the 
projected image, grasp the lens by the front ring and rotate it.
Adjust foot
Rotate the 4 feet on projector for image position.
Note:
Ceiling Mode can’t adjust this function. 
LENS
SHIFT
Shift adjustment
Vertical Lens Shift
To shift the projected image vertically, press   on the keypad.
Range: Up, 50%; Down, 0%.
Horizontal Lens Shift...

25
DLP Projector - User’s Manual
Start using the projector - Operation
Selecting An Input Source
When you turn on the D8800/D8900/D8010W, it switches to the last selected input and looks for a 
valid signal. Press INPUT on the remote control to select an input source directly.INPUT
Selecting an Aspect Ratio
Press ASPECT to adjust the video aspect ratio.ASPECT
2
Using the OSD
1. Press the MENU button on the remote control or machine top cover’s keypad to display the OSD main menu.
2.  Press  or  to...

DLP Projector - User’s Manual
26
Start using the projector - OSD Introduction
OSD Menu Tree
INPUTInput Selection
HDMI
DVI
VGA
Component / BNC
Composite
S-Video
3G-SDI
PIP PIP Option
PIP Input
PIP Swap
Position
Test Pattern Color Bar
Crosshatch
Burst
Res
Green
Blue
White
Black
Uncorrected Red
Uncorrected Green
Uncorrected Blue
H Ramp
Off
Color Space Auto
YCbCr
YPbPr
RGB-PC
RGB-Video
Input Lock Auto
48Hz
50Hz
60Hz
Background Logo
Blue
Black
White
Video Standard Auto
PA L
SECAM
NTSC
Auto Sync Adjust Off...

27
DLP Projector - User’s Manual
ALIGNMENTProjection Mode
Front
Rear
Ceiling + Front
Ceiling + Rear
Fan Mode Normal
Up
Down
Lens Control Zoom
Focus
Lens Memory Load Memory
Save Memory
Center Lens Execute
Warp Keystone
Rotation
Pincushion / Barrel
Top Left Corner
Top Right Corner
Bottom Left Corner
Bottom Right Corner
Custom Warp
Reset
Blanking To p
Bottom
Left
Right
Reset
Edge Blend Edge Blend
Blend Width
Black Level Uplift
Reset
CONTROLEco Network Power
Standard
Eco
Auto Power Off On
Off
Auto Power On...

DLP Projector - User’s Manual
28
OSD Introduction - INPUT
INPUTPICTURE
Input Selection
PIP
Te st Pattern
Color Space
Input Lock
Background
V ideo Standard
Auto Sync  Adjust Enter
Enter
Enter
<       RGB-PC       >
<            Auto          >
<          Logo           >
<           -----           >
<          Always        >
LAMPS
ALIGNMENT CONTROLSERVICE
 
y Input Selection
This function is same as the hotkey which on Remote controller. You can use remote controller or this function to 
select the...

29
DLP Projector - User’s Manual
TimingSDI Link mode Signal Standards Color 
Encode Sampling 
Structure Bit 
depth Cable Length 
Tested
1080P 24Hz HD-SingleSMPTE 292M292M 1.5Gbps HD YCbCr4:2:2 10128m
720P 60Hz HD-SingleSMPTE 292M292M 1.5Gbps HD YCbCr4:2:2 10128m
720P 50Hz HD-SingleSMPTE 292M292M 1.5Gbps HD YCbCr4:2:2 10128m
1080Sf 25Hz HD-SingleSMPTE 292M292M 1.5Gbps HD YCbCr4:2:2 10128m
1080Sf 30Hz HD-SingleSMPTE 292M292M 1.5Gbps HD YCbCr4:2:2 10128m
1080P 50Hz 3G Level ASMPTE 424M 3Gbps YCbCr4:2:2...

DLP Projector - User’s Manual
30
 
y Color Space
This function allows you to change component, composite, and RGB sources. You can select different color space 
for different color performance.
 
y The default setting, Auto, functions as follows:
HDMI: If the Auxiliary Video Information (AVI) infoframe contains color space and/or range data, the 
D8800/D8900/D8010W use that information. Otherwise, for RGB sources, the D8800/D8900/D8010W use 
the RGB-Video color space. For component SDTV and EDTV...