ViewSonic Projector Pro9500 User Manual

146
ViewSonic
  Pro9500
  Presenter Mode
In the Single PC mode, the projector can be occupied by one computer 
and can block an access from any other computer, if the Presenter mode is 
selected in the “LiveViewer”. 
While making your presentation, you don’t need to worry that the image on 
screen is unexpectedly switched to an image sent by another computer . 
If you want to turn it on, put a check mark in the check box.
• If the Multi PC mode is selected, the setting for the Presenter mode is...

147
ViewSonic
  Pro9500
2. Network Presentation
2.2 Starting the Network Presentation
This chapter explains the Network Presentation feature with which you can project 
computer images transmitted through a network. 
The “LiveViewer” allows you to project images from one or multiple computers by 
connecting the projector to an existing network without using computer cables.
This Network Presentation feature helps you to smoothly make your presentations 
and conduct conferences.
To start the Network...

148
ViewSonic
  Pro9500
2. Network Presentation
2.2 Starting the Network Presentation (continued)
2.2.2 Presenter mode
2.2.3 Display User Name In the Single PC mode, the projector can be occupied by one computer and can 
block an access from any other computer, if the Presenter mode is selected in the 
“LiveViewer”.
While making your presentation, you don’t need to worry that the image on screen 
is unexpectedly switched to an image sent by another computer. 
The Presenter mode can be set on the Option...

149
ViewSonic
  Pro9500
3. Web Control
You can adjust or control the projector via a network from a web browser on a 
computer that is connected to the same network.
• Internet Explorer 6.0 or later is required.
• If JavaScript is disabled in your web browser configuration, you must enable 
JavaScript in order to use the projector web pages properly. See the Help files 
for your web browser for details on how to enable JavaScript.
• It is recommended that all web browser updates are installed.  NOTE
3....

150
ViewSonic
  Pro9500
3. Web Control
3.1 Logon
To use the Web Control function, you need to logon with your user name and 
password.
Refer to the following for configuring or controlling the projector via a web browser. 
1) 
 
Display the logon window as shown on the right.
There are two options to display this window. 
 Using the “LiveViewer” Connect your computer and the projector 
via Network using the “LiveViewer”.
Then click the Web Control button 
 on 
the “LiveViewer” main menu to start the...

151
ViewSonic
  Pro9500
Below are the factory default settings for user name and password.
User namePassword
Administrator 
If you logon successfully, the screen below will be displayed.
Main menu
3)  Click the desired operation or configuration item on the main menu.
3.1 Logon (Continued)
3. Web Control 

152
ViewSonic
  Pro9500
3.2 Network Information
Displays the projector’s current network configuration settings.
Item Description
Projector Name Displays the projector name settings.
DHCP Displays the DHCP configuration settings.
IP Address Displays the current IP address.
Subnet Mask Displays the subnet mask.
Default Gateway Displays the default gateway.
DNS Server Address Displays the DNS server address.
MAC Address Displays the ethernet MAC address.
3. Web Control 

153
ViewSonic
  Pro9500
3.3 Network Settings
Displays and configures network settings.
Item Description
IP Configuration Configures network settings.
DHCP ON Enables DHCP.
DHCP OFF Disables DHCP.
IP Address Configures the IP address when DHCP is disabled.
Subnet Mask Configures the subnet mask when DHCP is disabled.
Default Gateway Configures the default gateway when DHCP is disabled.
Projector Name Configures the name of the projector.
The length of the Projector Name can be up to 64 alphanumeric...

154
ViewSonic
  Pro9500
3.4 Port Settings
Displays and configures communication port settings.
Item Description
Network Control Port1 
(Port:23) Configures command control port 1 (Port:23).
Port open Click the [Enable] check box to use port 23.
Authentication Click the [Enable] check box when authentication is required 
for this port.
Network Control Port2 
(Port:9715) Configures command control port 2 (Port:9715).
Port open Click the [Enable] check box to use port 9715.
Authentication Click the...

155
ViewSonic
  Pro9500
Item Description
SNMP Port Configures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address Configures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain 
name if the valid DNS server is setup in the 
Network 
Settings. The maximum length of host or domain name is up 
to 255 characters.
Download MIB file Downloads a MIB file from the projector.
Network Bridge Port Configures the Bridge port number....