ViewSonic Projector Pro9500 User Manual

106
ViewSonic
  Pro9500
Specifications
Specifications
ItemSpecification
Product name Liquid crystal projector
Liquid Crystal 
Panel 786,432 pixels (1024 horizontal x 768 vertical)
Lamp 245 W UHP
Speaker 16 W mono (8 W x2)
Power supply/
Rated current AC100-120 V: 4.0 A, AC220-240 V: 2.0 A
Power 
consumption AC100-120 V: 380 W, AC220-240 V: 360 W
Temperature 
range 5 ~ 35 °C (Operating)
Size 401 (W) x 103 (H) x 318 (D) mm
* Not including protruding parts.
Weight (mass) approx. 4.6 kg
Ports COMPUTER IN1...

107
ViewSonic
  Pro9500
[unit: mm] 

108
ViewSonic
  Pro9500
1. Connection to the network
1.1 System requirements
1. Connection to the network
The following equipments are required to connect the projector to your computer 
through the network.
The “LiveViewer” software needs to be installed on all the computers to connect 
to the projector through a network. To use the “LiveViewer” your computer needs 
to meet the following requirements. 1.1.1 Required equipment preparation
1.1.2 Hardware and software requirement for computer ü...

109
ViewSonic
  Pro9500
1. Connection to the network
1.1 System requirements (continued)
• Referring to the manual of your computer or Windows, select the 
following or a smaller display resolution for the computer.
1024 x 768 (XGA)
When a resolution larger than the specified resolution is selected, the projector 
will convert and display in the specified resolution, and the display speed 
may become faster. If your computer does not support the display resolution 
specified above, a smaller resolution...

110
ViewSonic
  Pro9500
1.2 Installing the “LiveViewer”
The “LiveViewer” software needs to be installed on all the computers to connect 
to the projector through a network.
You need to log in as an administrator user to install the software.
1) Turn on the computer.
2) Shut down all applications.
3) 
 Insert the accompanying CD-ROM into the computer's CD-ROM drive.
4) Click on the [Start] button on the toolbar and select the “Run”.
5) Enter  E:\Application\LiveViewer\LiveViewer_Setup.exe and then...

111
ViewSonic
  Pro9500
• The C:\Program Files\Projector 
Tools\LiveViewer folder will be created and 
the program will be installed into that folder. If 
you wish to install to a different folder, click the 
[Browse] and select another folder.  NOTE
1. Connection to the network
10)   Confirm the program folder name. If “Projector 
Tools” is okay, press the [Next] to continue. 
If not, enter the desired folder name and then 
press the [Next].
11) 
 [Windows
® XP]
The Hardware Installation dialog appears...

112
ViewSonic
  Pro9500
1.3 Process to connect the network
Before connecting your computer and projector via a network, make sure that 
the LAN port is selected as the input source on the projector. (Operating in the 
Operating Guide) Otherwise a connection cannot be established.
1.3.1 Process over view
An overview of the process to connect your 
computer and the projector via a 
network is shown below.
The “LiveViewer” allows you to skip some of the steps below to establish a 
network connection...

113
ViewSonic
  Pro9500
1.3.2 Starting the “LiveViewer”
Start the “LiveViewer” in your computer, taking one of the followings.
● 
 Double click the “LiveViewer” icon on the Desktop in your computer
● 
 Select “Start” → “All Programs” → “Projector Tools” → “LiveViewer” on 
Windows menu.
Then, proceed to item 1.4 Selecting the network connection mode .
1.3 Process to connect the network (continued)
1. Connection to the network 

114
ViewSonic
  Pro9500
1.4 Selecting the network connection mode
• If you select the wireless LAN, the wireless LAN adapters in your computer 
are shown in the list.
• If the wired LAN is selected, the wired LAN adapters in your computer are shown.NOTE
After starting the “LiveViewer”, the “Select the 
Network Connection” screen comes up.
Select the network connection that you would like 
to use. There are 3 options in the menu.
• Wireless LAN
• Wired LAN
• My Connection
If you select either the...

115
ViewSonic
  Pro9500
1.4 Selecting the network connection mode (continued)
n 
 A network connection was not established.
The screen is displayed in the case that the 
projector is not connected with a LAN cable 
to your computer when the wired LAN is 
selected.
 
Be sure that the projector is connected with 
a LAN cable to your computer.
Click the [OK], then the screen is back to the previous one to select the network 
connection mode.
1. Connection to the network